Distinctive NiS₂ nanocages with hollow sphere structures can effectively suppress the “shuttle effect” and accelerate the redox kinetics of polysulfides.

Cost-effective, clean, highly transparent, and flexible as well as a coatable packaging material is envisioned to solve or at least mitigate quality preservation issues of organic materials, originating from moisture interaction under ambient conditions. Liquid phase processing of packaging coatings using nano-clay and polyvinyl alcohol (PVOH) has been developed and reported. Detailed analysis of the developed coating revealed moisture permeability of 2.8 × 10⁻² g·cm/m²·day at 40 °C and 85% relative humidity (RH), which is in close accordance with Bharadwaj’s theoretical permeability model. Moreover, the developed coatings are not only more than 90% transparent, when exposed to white light, but also exhibit excellent flexibility and even after going through 10,000 bending cycles maintained the same blocking effect against moisture.

Plastic bottles are generally recycled by remolding them into numerous products. In this study, waste from plastic bottles was used to fabricate recycled polyethylene terephthalate (r-PET) nanofibers via the electrospinning technique, and high-performance conductive polyethylene terephthalate nanofibers (r-PET nanofibers) were prepared followed by copper deposition using the electroless deposition (ELD) method. Firstly, the electrospun r-PET nanofibers were chemically modified with silane molecules and polymerized with 2-(methacryloyloxy) ethyl trimethylammonium chloride (METAC) solution. Finally, the copper deposition was achieved on the surface of chemically modified r-PET nanofibers by simple chemical/ion attraction. The water contact angle of r-PET nanofibers, chemically modified r-PET nanofibers, and copper deposited nanofibers were 140°, 80°, and 138°, respectively. The r-PET nanofibers retained their fibrous morphology after copper deposition, and EDX results confirmed the presence of copper on the surface of r-PET nanofibers. XPS was performed to analyze chemical changes before and after copper deposition on r-PET nanofibers. The successful deposition of copper one r-PET nanofibers showed an excellent electrical resistance of 0.1 ohms/cm and good mechanical strength according to ASTM D-638.