The use of nanofluids in heat transfer applications has significantly increased in recent times due to their enhanced thermal properties. It is therefore important to investigate the flow behavior and, thus, the rheology of different nanosuspensions to improve heat transfer performance. In this study, the viscosity of a BN-diamond/thermal oil hybrid nanofluid is predicted using four machine learning (ML) algorithms, i.e., random forest (RF), gradient boosting regression (GBR), Gaussian regression (GR) and artificial neural network (ANN), as a function of temperature (25–65 °C), particle concentration (0.2–0.6 wt.%), and shear rate (1–2000 s−1). Six different error matrices were employed to evaluate the performance of these models by providing a comparative analysis. The data were randomly divided into training and testing data. The algorithms were optimized for better prediction of 700 experimental data points. While all ML algorithms produced R2 values greater than 0.99, the most accurate predictions, with minimum error, were obtained by GBR. This study indicates that ML algorithms are highly accurate and reliable for the rheological predictions of nanofluids.
The addition of nanoparticles into conventional fluids changes their thermophysical properties, such as thermal conductivity, viscosity, density, and specific heat capacity (SHC). While different nanofluids' thermal conductivity and viscosity are studied extensively, only a few experimental studies are subjected to SHC properties. It is important to investigate the SHC of nanofluids to understand their thermal aspects, particularly where the literature shows ambiguous results for the SHC of nanofluids. This study measures the SHC of diamond-based thermal oil nanofluids using differential scanning calorimeter (DSC) at varying nanoparticle concentrations of 0.25, 0.5, 0.75, and 1 wt% and a temperature range of 35–80 °C. The SHC of these nanofluids increased with temperature and decreased with an increase in nanoparticle concentration with a maximum SHC decrement of 8.25% at the highest 1 wt% concentration. The classical models are proved to underpredict the SHC of diamond-thermal oil nanofluids, as many nano-scale phenomena are not considered in these models. Therefore, a new multivariable correlation is also proposed for predicting the SHC of diamond-thermal oil nanofluids, exhibiting a good agreement with the experimental data with an R2 of 96.35%.
Diclofenac sodium (DCF) is a non-steroidal anti-inflammatory drug mainly used as an analgesic, arthritic and anti-rheumatic. This study deals with the degradation of diclofenac by photo catalytic-based advanced oxidation processes. Artificial UV lamp and solar rays have been applied to activate the ZnO catalyst, thereby generating highly oxidizing species. These species initiate the degradation process of the drug, which results in intermediates that finally dissociate into carbon dioxide and water. The solar reactor system is comprised of quartz and borosilicate tubes alternatively for the absorption and transmission of the solar rays to the pollutant sample. The degradation rate has been analyzed by composition analysis using high performance liquid chromatography. TOC and COD tests have also been conducted for degraded samples. ZnO catalyst loading was tested from 0.1 gm/L to 1 gm/L and the degradation rate showed a rising trend up to 0.250 gm/L, but further increase in loading resulted in a drop in degradation. Similarly, degradation is higher in acidic condition as compared to neutral or basic pH. The results showed a higher degradation rate for UV lamp irradiation as compared to the solar system. Moreover, TOC and COD reduction is also found to be higher for UV lamp photo catalysis.
Diclofenac sodium (DCF) is a non-steroidal anti-inflammatory drug mainly used as an analgesic, arthritic and anti-rheumatic. This study deals with the degradation of diclofenac by photo catalytic-based advanced oxidation processes. The solar reactor system is comprised of quartz and borosilicate tubes for the absorption of the solar rays and transmission to the pollutant sample. Artificial UV lamp and solar rays have been applied to activate the ZnO catalyst, thereby generating highly oxidizing species. These species initiate the degradation process of the drug, which results in intermediates that finally dissociate into carbon dioxide and water. The degradation rate has been analyzed by composition analysis using high performance liquid chromatography. TOC and COD tests have also been conducted for degraded samples. ZnO catalyst loading was tested from 0.1 gm/L to 1 gm/L and the degradation rate showed a rising trend up to 0.250 gm/L, but further increase in loading resulted in a drop in degradation. Similarly, degradation is higher in acidic condition as compared to neutral or basic pH condition. The results showed a higher degradation rate for UV lamp irradiation as compared to the solar system. Moreover, TOC and COD reduction results were also found to be higher for UV lamp photo catalysis.