Duc Pham minh

Dr. Duc Pham minh

HCMC University of Technology and Education
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2014 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
DMDuc Pham minh
Duc Pham minh
LGLe Hieu Giang
Le Hieu Giang
MDMai Duc Dai
Mai Duc Dai
DSDo Tien Sy
Do Tien Sy
The main purpose of this study is to investigate the influence of tool geometry (cutting edge angle, rake angle, and inclination angle) and to optimize tool wear and surface roughness in hard turning of AISI 1055 (52HRC) hardened steel by using TiN coated mixed ceramic inserts. The results show that the inclination angle is the major factor affecting the tool wear and the surface roughness in hard turning. With the increase in negative rake and inclination angles, the tool wear decreases, and the surface roughness increases. However, the surface roughness will decrease when the inclination angle increases to overpass a certain limit. This is a new and significant point in the research of the hard turning process. From this result, the large negative inclination angle (λ = −10°) should be applied to reduce the surface roughness and the tool wear simultaneously. With the optimal cutting tool angles in the research, the hard machining process is improved remarkably with decreases of surface roughness and tool wear 8.3% and 41.3%, respectively in comparison with the standard tool angles. And the proposed tool-post design approach brings an effective method to change the tool insert angles using standard tool-holders to improve hard or other difficult-to-cut materials turning quality.

14 June 2021 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
DMDuc Pham minh
Duc Pham minh
DDDai Mai Duc
Dai Mai Duc
LGLe Hieu Giang
Le Hieu Giang
To analyze hard turning performance characteristics, a new mathematical model was developed for the hard turning process, and cutting force (CF), another important response for cutting machining, was also studied in the present work. The analysis of the mathematical model and experimental results revealed that thrust force (Fy) was the largest, followed by tangential force (Fz) and feed force (Fx). The resultant CF was most influenced by inclination angle (IA) with 25.02, followed by rake angle (RA) (14.26) and cutting edge angle (CEA) (10.04). Increasing CEA changed the position of cutting on the tool-nose radius and increased local negative RA and correspondingly local clearance angle (CA). Meanwhile, increasing negative RA and IA resulted in larger local negative RA and CA. Moreover, local RA and local CA were the main geometric factors affecting surface roughness (SR), tool wear (TW), and CF. Increasing local negative RA resulted in higher SR and CF. In contrast, increasing local CA resulted in lower SR, TW, and CF. Under specific conditions, the positive effects of the local CA overcame the negative effects of the local negative RA, leading to a simultaneous decrease in SR and TW. The proposed novel mathematical model can be further applied to calculate local CF, cutting temperature, and TW for each cutting-edge element, to analyze and optimize the hard turning process.

1 January 2016 in International Journal of Mechanical Engineering and Applications
Verified
Journal Article
Open access
PDF file
LGLe Hieu Giang
Le Hieu Giang
MDMai Duc Dai
Mai Duc Dai
DMDuc Pham minh
Duc Pham minh
Turning is one of the most widely metal cutting methods. Machines, tool geometry and machining parameters are the main factors influencing machining quality and efficiency. So there is a lot of research on it. This paper studies on the influence of the geometrical parameters of the tool including: back rake angle (BR), side rake angle (SR) and side cutting-edge angle (SCEA) on cutting forces, temperature and tool wear in turning using FEM (by Deform 3D finite element simulation software) and Taguchi’s technique (by Minitab16 statistical software) is used to design the experiment and to analyze output quality characteristics from simulation results. And the optimum tool geometry parameters are given.

20 January 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DMDuc Pham minh
Duc Pham minh
LGLe Hieu Giang
Le Hieu Giang
VNVan-Thuc Nguyen
Van-Thuc Nguyen
The cutting temperature in hard turning is extremely high, which reduces tool life, lowers machined-surface quality, and affects dimensional control. However, hard turning differs greatly from conventional turning in that the cutting process mainly happens at the tool-nose radius due to the extremely shallow depth of the cut. This paper provides a comprehensive and systematic analysis of this issue based on an evaluation of tool geometry in hard turning via finite element analysis (FEA) simulations and experiments. The effect of tool angles on cutting temperature in hard turning is analyzed. The impacts of cutting-edge angle, rake angle, inclination angle, and average local rake angle on the cutting temperature are investigated via central composite design (CCD). The simulated results and the empirically measured cutting temperature exhibit comparable patterns, with a minor 2% difference. Increasing the cutting-edge angle, negative rake angle and negative inclination angle enhances the local negative rake angles of the cutting-edge elements at the tool-nose radius involved in the cutting process. Notably, the most important component influencing cutting temperature in hard turning is the inclination angle, as opposed to normal turning, where the rake angle dominates the heat generation. Following this is the cutting-edge angle and the rake angle, which each contribute 40.75%, 32.39%, and 7.03%. These findings could enhance the application of the hard-turning technique by improving tool life and surface quality by focusing on optimizing the inclination angle.

19 January 2025 in Metals
Verified
Journal Article
Open access
PDF file
VNVan-Thuc Nguyen
Van-Thuc Nguyen
NHNguyen Quang Hien
Nguyen Quang Hien
DMDuc Pham minh
Duc Pham minh
TNTran Duy Nam
Tran Duy Nam
HHHoang Van Huong
Hoang Van Huong
Van Thanh Tien NguyenVan Thanh Tien Nguyen
Van Thanh Tien Nguyen
This study aims to examine how the collision angle affects the Cu-Ta weld generated by the explosive welding method using molecular dynamics modeling. When two blocks collide, the metallic substrates melt rapidly. Subsequently, when heat energy dissipates to the surrounding areas, the weld interface begins rapidly cooling. Eventually, the weld joint’s surface shape and temperature stabilize. A meta-solid solution state between Cu and Ta could develop under extreme collision conditions of explosive welding through a dynamic diffusion mechanism. Furthermore, the plastic deformation process of the face-centered cubic (FCC) matrix after the explosive collision causes twin boundary scattering in the Cu substrate. The stress evolution experiences three stages: quick increasing, spreading out, and stabling. The stress mainly concentrates on the weld joint. Due to its dynamic recrystallization mechanism, the Cu substrate has a lower residual stress level than the Ta substrate. The atomic strain of the Cu-Ta weld joint improves dramatically as the impact angle increases. The high-strain zone extends toward the lower Ta block between 5° and 15°. Furthermore, the atomic strain and amorphous structure rates increase when the impact angles increase from 5° to 15°. After further improvement up to 20°, they then suffer a decrease. The Cu-Ta weld achieves a tensile strength ranging from 6.37 to 8.94 GPa. The Cu/Cu-Ta/Cu welding joint’s interface is coherent, transforming from an amorphous to a body-centered cubic (BCC) structure. Because of the dynamic diffusion mechanism at the interface, which creates an almost identical atomic rate between Cu and Ta atoms, combined with the dynamic recrystallization phenomenon, explosive welding provides the advantage of combining two low-solubility solid-solution metals.