The mold-making industry is currently facing several challenges, including new competitors in the market as well as the increasing demand for a low volume of precision moldings. The purpose of this research is to appraise a new formulation of Metal Epoxy Composite (MEC) materials as a mold insert. The fabrication of mold inserts using MEC provided commercial opportunities and an alternative rapid tooling method for injection molding application. It is hypothesized that the addition of filler particles such as brass and copper powders would be able to further increase mold performance such as compression strength and thermal properties, which are essential in the production of plastic parts for the new product development. This study involved four phases, which are epoxy matrix design, material properties characterization, mold design, and finally the fabrication of the mold insert. Epoxy resins filled with brass (EB) and copper (EC) powders were mixed separately into 10 wt% until 30 wt% of the mass composition ratio. Control factors such as degassing time, curing temperature, and mixing time to increase physical and mechanical properties were optimized using the Response Surface Method (RSM). The study provided optimum parameters for mixing epoxy resin with fillers, where the degassing time was found to be the critical factor with 35.91%, followed by curing temperature with 3.53% and mixing time with 2.08%. The mold inserts were fabricated for EB and EC at 30 wt% based on the optimization outcome from RSM and statistical ANOVA results. It was also revealed that the EC mold insert offers better cycle time compared to EB mold insert material.
1 April 2020 in Journal of Physics: Conference Series
Achieving highly efficient visible red emission with high color purity from the rare earth ions doped glasses containing metallic nanoparticles is of scholastic significance in the quest of novel laser glass host. Stimulated by this demand, we synthesized some new class of silver nanoparticles (Ag – NPs) embedded europium ions (Eu3+) doped boro – telluro – dolomite glasses (hereafter coded as BTDEAx, where x = 0.0, 0.1, 0.3, 0.5, 0.8 and 1.0 mol%) by convectional melt quenching method. These glasses were optically characterized using UV – Vis – NIR absorption and photoluminescence (PL) spectroscopy’s to ascertain their lasing candidacy. The absorption spectra of the Eu3+ ion free sample (BTDA0.8) disclosed a single surface plasmon band characteristic of Ag – NPs at 464 nm. Meanwhile, the visible emission intensities (excited with 467 nm wavelength) of the glasses due to Ag – NPs inclusion were greatly intensified. Of all glasses, the sample prepared with 0.8 mol% of Ag NPs (BTDEAg0.8) revealed highest PL intensity enhancement. Furthermore, the attainment of high color purity (97.037 %) detected from the CIE diagram with chromaticity coordinates (0.63765, 0.36094) close to ideal red color phosphor (0.67, 0.33) indeed approved the suitability of the proposed glasses for solid state red laser construction.
28 February 2022 in Archives of Metallurgy and Materials
The increasing needs of using aluminum epoxy composite as a replacement to solid metal rapid prototyping has opened to interests in optimizing its machining processes. This paper reported on the success of optimizing the surface roughness of aluminium epoxy composite using milling process along with a new finding on the best combination parameters. Taguchi method was used as the optimization method whereas spindle speed, feed rate, and depth of cut were set as input factors using an L9 Orthogonal Array. Analysis of Variance was used to identify the significant factors influencing the surface roughness. Experiment was conducted in dry condition using a vertical milling machine and the surface roughness after the machining was evaluated. Optimum combination of cutting parameters was identified after the finest surface roughness (response) based on the signal-to-noise ratio calculated. Cutting parameters selected after preliminary testing are cutting speeds of (2000, 3000 and 4000) rpm, feed rate (300, 400 and 500) mm/min, and cutting depth (0.15, 0.20, and 0.25) mm. The result showed that cutting speed had the largest percentage contribution to surface roughness with 69% and the second highest contribution was feed rate with 22% and depth of cut at 9%. The spindle speed was found as the most significant factor influencing the quality of surface roughness. The result is significant particularly in providing important guidelines for industries in selecting the right combination of parameters as well as to be cautious with the most significant factor affecting the milling process of metal epoxy composite.
27 February 2021 in Arabian Journal for Science and Engineering
Due to their low shrinkage and easy moldability, metal epoxy composites (MEC) are recognized as an alternative material that can be applied as hybrid mold inserts manufactured with rapid tooling (RT) technologies. Although many studies have been conducted on MEC or reinforced composite, research on the material properties, especially on thermal conductivity and compressive strength, that contribute to the overall mold insert performance and molded part quality are still lacking. The purpose of this research is to investigate the effect of the cooling efficiency using MEC materials. Thus, this research aims to appraise a new formulation of MEC materials as mold inserts by further improving the mold insert performance. The effects of the thermal, physical, and mechanical properties of MEC mold inserts were examined using particles of brass (EB), copper (EC), and a combination of brass + copper (EBC) in irregular shapes. These particles were weighed at percentages ranging from 10% to 60% when mixed with epoxy resin to produce specimens according to related ASTM standards. A microstructure analysis was made using a scanning electron microscope (SEM) to investigate brass and copper particle distribution. When filler composition was increased from 10% to 60%, the values of density (g/cm3), hardness (Hv), and thermal conductivity (W/mK) showed a linear upward trend, with the highest value occurring at the highest filler composition percentage. The addition of filler composition increased the compressive strength, with the highest average compressive strength value occurring between 20% and 30% filler composition. Compressive strength indicated a nonlinear uptrend and decreased with increasing composition by more than 30%. The maximum value of compressive strength for EB, EC, and EBC was within the range of 90–104 MPa, with EB having the highest value (104 MPa). The ANSYS simulation software was used to conduct a transient thermal analysis in order to evaluate the cooling performance of the mold inserts. EC outperformed the EB and EBC in terms of cooling efficiency based on the results of thermal transient analysis at high compressive strength and high thermal conductivity conditions.
30 April 2026 in Jurnal Teknologi (Sciences & Engineering)
Developing mold inserts for Rapid Tooling (RT) using Metal Epoxy Composite (MEC) material offers a commercially viable alternative for injection molding applications. However, existing research on actual MEC mold performance and the quality of the molded parts produced is limited. This study aims to analyze the performance of MEC mold inserts for injection molding applications, focusing on their cooling efficiency and the quality of molded parts produced. An indirect RT method was employed to fabricate MEC mold inserts, with a filler composition of 60% wt. Core and cavity inserts were designed with integrated cooling channels and tested using an injection molding machine. Cooling time was measured experimentally and compared to simulation results obtained via Moldflow software. The experimental findings revealed an average cooling time of 23.3s for the MEC mold inserts, compared to 21.9s in the simulation. Molded Parts with MEC inserts demonstrated improved tensile modules and reduced elongation compared to those molded parts with P20 steel mold inserts. However, the value difference is insignificant and still lies within the acceptable limits. This research contributes to the body of knowledge by providing practical insights into the fabrication and performance of MEC mold inserts using RT techniques, demonstrating that MEC is a promising material for RT applications in injection molding, with competitive performance characteristics.