Ramoon Temporim

Dr. Ramoon Temporim

CIRIAF - INTERUNIVERSITY RESEARCH CENTRE ON POLLUTION AND ENVIRONMENT MAURO FELLI
+2
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
RTRamoon Temporim
Ramoon Temporim
Gianluca CavalaglioGianluca Cavalaglio
Gianluca Cavalaglio
APAlessandro Petrozzi
Alessandro Petrozzi
VCValentina Coccia
Valentina Coccia
PIPaola Iodice
Paola Iodice
Franco CotanaFranco Cotana
Franco Cotana
This article aims to present an evaluation of the environmental performance of a combustion polygeneration plant fed with lignocellulosic material from cardoon (Cynara cardunculus L.) through the technique of Life Cycle Assessment (LCA). The system boundaries encompassed macro-phases of crop production, transportation, and polygeneration processes that were able to produce 100 kW of electricity, a residual thermal energy recovery system and district heating and cooling with 270 kW of heating, and a 140 kW of cooling. The LCA was performed using Cumulative Energy Demand and ReCiPe Life Cycle Impact Assessment methods through midpoint and endpoint indicators. From 2000 h/year, 165.92 GJ of electricity and 667.23 GJ of primary energy were consumed, and 32.82 tCO2eq were emitted. The rates of Greenhouse Gas (GHG) and energy demand per MJ produced were 0.08 MJSE/MJPD, 0.30 MJPE/MJPD, and 0.01 kgCO2eq/MJPD. According to the ReCiPe method, the impact categories with the highest impact loads were Terrestrial ecotoxicity (2.44%), Freshwater ecotoxicity (32.21%), Marine ecotoxicity (50.10%), Human carcinogenic toxicity (8.75%), and Human non-carcinogenic toxicity (4.76%). Comparing the same energy outputs produced by Italian power and gas grids, the proposed polygeneration plant was able to reduce primary energy demand and GHG emissions by 80 and 81%, respectively, in addition to reducing the emissions of the five main categories of impacts by between 25 and 73%.

14 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Gianluca CavalaglioGianluca Cavalaglio
Gianluca Cavalaglio
IMIppolita Mecca
Ippolita Mecca
PIPaola Iodice
Paola Iodice
TGTommaso Giannoni
Tommaso Giannoni
MGMattia Gelosia
Mattia Gelosia
RTRamoon Temporim
Ramoon Temporim
This study aimed to conduct a comprehensive Life Cycle Assessment (LCA) of lignin-based polyol production through organosolv fractionation of cardoon stalks and subsequent lignin liquefaction. The LCA employed a cradle-to-gate approach, encompassing cardoon cultivation and all processing steps leading to polyol production. The research involved laboratory-scale optimization of the organosolv and liquefaction processes, followed by industrial-scale implementation. The analysis revealed that all stages of the production chain, including crop cultivation, organosolv, and liquefaction, significantly influenced overall environmental impacts. Specific materials and processes played pivotal roles, such as harvesting machinery and fertilizers in crop production, γ-Valerolactone (GVL) as the primary contributor (72–100%) to environmental impacts in the organosolv phase, and materials like polyethylene glycol 400 (PEG 400) and glycerin in the liquefaction phase, accounting for the majority (96–100%) of environmental impacts in this stage. When considering endpoint damage categories, it became evident that this production chain had a notable impact on human health, primarily due to emissions in air, water, and soil from agricultural processes. Lignin-based polyols demonstrated a moderate improvement compared to their petroleum-based counterparts, with an approximate reduction of 3–16% in environmental impact.

18 April 2024 in Heliyon
Verified
Journal Article
Open access
RTRamoon Temporim
Ramoon Temporim
Alessia Di GiuseppeAlessia Di Giuseppe
Alessia Di Giuseppe
FLFabiana Frota de Albuquerque Landi
Fabiana Frota de Albuquerque Landi
Andrea NicoliniAndrea Nicolini
Andrea Nicolini
Refrigerators, as other cooling systems, are responsible for a significant parcel of anthropogenic emissions since they are essential and heavy appliances that use energy during its lifespan and are loaded with refrigerant gases. Three types of commercial refrigerators and their new versions, with incorporated CO2 as refrigerant gas and an wireless system for maintenance monitoring (WSMM) were investigated to evaluate how optimization could impact on the environmental performance during their entire life cycle. This study conducted a comprehensive Life Cycle Assessment (LCA) of the refrigerators, from the production to their end-of-life. The findings revealed that the use phase and the raw materials were responsible for most of the environmental impact throughout the refrigerators' life cycle. Key impact categories such as Fossil Resource Scarcity, Freshwater Eutrophication, and Global Warming were particularly affected, largely due to the electricity mix in the use phase. Additionally, the extraction and production of raw materials, specifically steel and copper, made significant contributions to Terrestrial Ecotoxicity and Human Carcinogenic Toxicity categories. The optimization measures impacted mainly in the energy consumption during the use phase, resulting in a notable reduction of approximately 57 % for models that underwent refrigerant change and 60 % for the model that underwent both refrigerant change and electronic system installation. As a result of decreased energy consumption, there was a significant decrease of 13 %–16 % across all impact categories, underscoring the positive environmental implications of these optimization strategies.

23 November 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
RTRamoon Temporim
Ramoon Temporim
APAlessandro Petrozzi
Alessandro Petrozzi
VCValentina Coccia
Valentina Coccia
Franco CotanaFranco Cotana
Franco Cotana
Gianluca CavalaglioGianluca Cavalaglio
Gianluca Cavalaglio
The focus of this study is to analyze the energy flows related to cardoon oil processing based on the estimated electricity consumption. It was carried out in a prototype oilseed extraction plant located in Umbria Region, Italy. This installation consists of the following processes: seed weight-storage, transportation, sifting, milling, filtering, and oil storage. Approximately 49,000 kg dry basis (DB) of cardoon seeds (Cynara cardunculus) were processed. Cardoon seeds were chosen as a feedstock due to their sustainability characteristics. Before processing, samples of raw material were analyzed in terms of moisture, oil content, impurity, density, and lower heating value. The input–output flows were measured in terms of weight and energy consumption. Its data were used to perform the mass-energy balance and estimate the efficiency of processes. About 8505 kg of filtered oil was obtained from raw material. The efficiency of the process chain was 84.42% concerning the oil content in the seeds. For the same period, the plant required a total of 17,556 MJ of electric energy from the grid for its operation. 321,507 MJ were obtained from oil and 688,875 MJ from oilcake. About 5.48% of the energy produced by oil extraction was virtually used in the process.

25 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
RTRamoon Temporim
Ramoon Temporim
Gianluca CavalaglioGianluca Cavalaglio
Gianluca Cavalaglio
APAlessandro Petrozzi
Alessandro Petrozzi
VCValentina Coccia
Valentina Coccia
Franco CotanaFranco Cotana
Franco Cotana
Andrea NicoliniAndrea Nicolini
Andrea Nicolini
Given the current scenario of increasing environmental problems associated with the need for rapid energy transition, this article aimed to investigate the implementation of Cynara cardunculus L. (cardoon), a plant with high environmental performance, as a source of energy resources. This study presented thLife Cycle Assessment of two energy production chains—for the polygeneration of power, heat, and cooling; and to produce biodiesel—fed with cardoon seeds, in addition to comparing these chains with the use of the traditional Italian grids (power and gas) and with the production of diesel based on palm, soybean, and rapeseed. Approximately 49 t of seeds were cultivated and processed, yielding 8.5 t of oil. The system boundaries encompass three main macro-phases, cardoon production, oil extraction, and, depending on the application, energy generation (polygeneration) or transesterification (biodiesel). The models were developed using the software SimaPro V9.3.0.2, and the inventory was based on the database ecoinvent V3.8. The Life Cycle Impact Assessment was performed using the ReCiPe V1.06 method at the midpoint (H) and endpoint (H/A) levels. Crude cardoon oil showed a global warming of 20–55% lower than other vegetable oils (palm, soybean, and rapeseed). In the case of biodiesel production, cardoon-based biodiesel presented a reduction in the impact burden by 12–57% compared to biodiesel based on palm, soybean, and rapeseed. With the use of oil in Polygeneration, a subtle increase in the impact burden was observed, with 13% more impact than the use of Italian power and gas grids.

23 April 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
VCValentina Coccia
Valentina Coccia
RTRamoon Temporim
Ramoon Temporim
APAlessandro Paglianti
Alessandro Paglianti
Alessia Di GiuseppeAlessia Di Giuseppe
Alessia Di Giuseppe
Franco CotanaFranco Cotana
Franco Cotana
Andrea NicoliniAndrea Nicolini
Andrea Nicolini
Particulate matter (PM) emissions from combustion-based heating systems have been identified as a major contributor to environmental issues and human health risks. Particularly, small-scale residential combustion was responsible for 58% of the total PM2.5 emissions in Europe in 2020, with domestic heating using wood-based fuels accounting for around 56% of soot emissions. Reducing PM2.5 emissions has become a major goal of European environmental policies, which have included it among the key targets of the Zero Pollution Action Plan. In this framework, this study presents a performance analysis of a newly developed PM abatement system consisting of a passive cyclone abatement system (PCAS) specifically designed for small residential pellet stoves. The system was tested under steady-state and non-steady-state operating conditions. The experimental results showed that the PCAS abatement system effectively captured PM at a rate of 10.64 mg/MJ, with great efficiency in capturing particles ≥ 10 µm. The heavy metal content in the captured material was below the limit values for agricultural application-destined soil. A Life Cycle Assessment showed that the PCAS could achieve net-zero PM emissions in 1 year and 8 months. Finally, the economic analysis revealed that the PCAS is significantly more cost-effective: over a 10-year period, it could save up to €4000 in installation, maintenance, and energy costs compared to conventional active systems. These findings highlight the effectiveness of this design of PCAS as in reducing PM emissions from residential heating systems and provide valuable insights for the development of future abatement systems.