The PRIN (Research Project with Relevant National Interest) project “Biocheaper—biomasses circular holistic economy approach to energy equipments” started in September 2019 and involves several universities: Palermo as the university coordinator, Perugia, Cassino, Enna, Pavia and Bolzano. The main goal of the project is to increase the energy efficiency and reduce the pollutants emissions in small-scale biomass plant for energy (heat and power) production. The project focuses on residual lignocellulosic feedstocks from the agriculture and forestry sector, from energy crops in marginal lands and residues from rivers maintenance. Starting from the selection and characterization of potential feedstocks, the project aims at developing some prototypes for retrofit applications in existing biomass boilers, like a mini-cyclone for the reduction of particulate emissions and an exhaust air-water condensing system for the recovery of water and the reuse in agriculture. This work presents the first results of the project, in particular regarding the selection and the chemical–physical characterization of different biomass, available in different zones of Italy; in particular the authors investigated cardoon chips, carthamus chips, olive and wine pruning, residues from rivers maintenance. Each biomass sample was characterized in terms of moisture content, ashes content, volatile substances, fixed carbon, low and high heating value, content of carbon, nitrogen, hydrogen and main metals.

The environmental impacts of sport events have been growing during the last decades, which has led to the organizing associations developing adequate countermeasures to both reduce carbon emissions due to construction and operational stages compensate for the emissions. This work aims at proposing an approach to stadiums energy enhancement that includes strategies largely recognized as effective and applicable to several building typologies (residential, commercial, academic, etc.). The selected case study is the Dacia Arena in northern Italy that has been recently refurbished and renovated. The proposed workflow has as a goal minimizing the increment of the operational emissions, caused by new heated areas in the stadium. Firstly, the energy consumption was estimated in dynamic state for Scenario 0 (current state) and Scenario 1 (refurbished state) to quantify the new plant’s energy demand. Secondly, two hypothetical system layouts were proposed and evaluated. In the first, the power for lighting, cooling and heating is supplied by a system that couples photovoltaic panels with heat pump. In the second, the same photovoltaic plant is integrated with a biomass plant and an absorption chiller. The comparison highlights the suitability of those interventions and the environmental advantages deriving from their exploitation.

The Biomass Research Centre, section of CIRIAF, has recently developed a biomass boiler (300 kW thermal powered), fed by the poultry manure collected in a nearby livestock. All the thermal requirements of the livestock will be covered by the heat produced by gas combustion in the gasifier boiler. Within the activities carried out by the research project ENERPOLL (Energy Valorization of Poultry Manure in a Thermal Power Plant), funded by the Italian Ministry of Agriculture and Forestry, this paper aims at studying an upgrade version of the existing thermal plant, investigating and analyzing the possible applications for electricity production recovering the exceeding thermal energy. A comparison of Organic Rankine Cycle turbines and Stirling engines, to produce electricity from gasified poultry waste, is proposed, evaluating technical and economic parameters, considering actual incentives on renewable produced electricity.

One of the primary targets for the new lignocellulosic feedstock-based biorefinery is the simultaneous valorization of holocellulose and lignin. Acidified organosolv treatment is among the most promising strategy for recovering technical lignin, water-soluble hemicellulose, and cellulose pulp with increased accessibility to hydrolytic enzymes. In this work, a design-of-experiment (DoE) approach was used to increase the cellulose recovery, digestibility, and the delignification of Cynara cardunculus L. feedstock. In the first treatment, the milled biomass was subjected to microwave-assisted extraction using an acidified GVL/water mixture to separate lignin and hemicellulose from cellulose. In the second treatment, the cellulose pulp was hydrolyzed by cellulolytic enzymes to demonstrate the enhanced digestibility. At the optimal condition (154 °C, 2.24% H₂SO₄, and 0.62 GVL/water ratio), the cellulose pulp showed a cellulose content of 87.59%, while the lignin content was lower than 8%. The cellulose recovery and digestibility were equal to 79.46% and 86.94%, respectively. About 40% of the initial hemicellulose was recovered as monosaccharides. This study demonstrated the effectiveness of the two-step organosolv treatment for biomass fractionation; however, as suggested by DoE analysis, a confirmative study at a low temperature (<154 °C) should be performed to further increase the cellulose recovery.

Hydrolysis and butanolysis of lignocellulosic biomass are efficient routes to produce two valuable bio-based platform chemicals, levulinic acid and n-butyl levulinate, which find increasing applications in the field of biofuels and for the synthesis of intermediates for chemical and pharmaceutical industries, food additives, surfactants, solvents and polymers. In this research, the acid-catalyzed hydrolysis of the waste residue of Cynara cardunculus L. (cardoon), remaining after seed removal for oil exploitation, was investigated. The cardoon residue was employed as-received and after a steam-explosion treatment which causes an enrichment in cellulose. The effects of the main reaction parameters, such as catalyst type and loading, reaction time, temperature and heating methodology, on the hydrolysis process were assessed. Levulinic acid molar yields up to about 50 mol % with levulinic acid concentrations of 62.1 g/L were reached. Moreover, the one-pot butanolysis of the steam-exploded cardoon with the bio-alcohol n-butanol was investigated, demonstrating the direct production of n-butyl levulinate with good yield, up to 42.5 mol %. These results demonstrate that such residual biomass represent a promising feedstock for the sustainable production of levulinic acid and n-butyl levulinate, opening the way to the complete exploitation of this crop.