Rita Kartika Sari

Dr. Rita Kartika Sari

IPB University, Indonesia
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 October 2022 in Forests
Verified
Journal Article
Open access
PDF file
Muhammad Iqbal MaulanaMuhammad Iqbal Maulana
Muhammad Iqbal Maulana
Muhammad Adly Rahandi LubisMuhammad Adly Rahandi Lubis
Muhammad Adly Rahandi Lubis
FFFauzi Febrianto
Fauzi Febrianto
Seng Hua LeeSeng Hua Lee
Seng Hua Lee
AIApri Heri Iswanto
Apri Heri Iswanto
Luigi TodaroLuigi Todaro
Luigi Todaro
In recent years, bio-based wood adhesives have gained an increased industrial and research interest as an environmentally friendly and renewable alternative to the commercial petroleum-based synthetic adhesives used in the wood-based industry. Due to its renewability, abundance, relatively low price, and good adhesion properties, starch is a promising natural feedstock for synthesizing bio-based adhesives for wood-based composites. This review aims to summarize the recent advances in developing sustainable starch-based wood adhesives for manufacturing non-toxic, low-emission wood composites with enhanced properties and lower environmental impact. Recent developments in starch modification, physical, and enzymatic treatments applied to improve the performance of starch-based wood adhesives, mainly in terms of improving their water resistance and bonding strength, are also outlined and discussed.

3 November 2021 in Forests
Verified
Journal Article
Open access
PDF file
MAManggar Arum Aristri
Manggar Arum Aristri
Muhammad Adly Rahandi LubisMuhammad Adly Rahandi Lubis
Muhammad Adly Rahandi Lubis
AIApri Heri Iswanto
Apri Heri Iswanto
Widya FatriasariWidya Fatriasari
Widya Fatriasari
RSRita Kartika Sari
Rita Kartika Sari
Antonio PizziAntonio Pizzi
Antonio Pizzi
Tannins are soluble, astringent secondary phenolic metabolites generally obtained from renewable natural resources, and can be found in many plant parts, such as fruits, stems, leaves, seeds, roots, buds, and tree barks, where they have a protective function against bacterial, fungal, and insect attacks. In general, tannins can be extracted using hot water or organic solvents from the bark, leaves, and stems of plants. Industrially, tannins are applied to produce adhesives, wood coatings, and other applications in the wood and polymer industries. In addition, tannins can also be used as a renewable and environmentally friendly material to manufacture bio-based polyurethanes (bio-PUs) to reduce or eliminate the toxicity of isocyanates used in their manufacture. Tannin-based bio-PUs can improve the mechanical and thermal properties of polymers used in the automotive, wood, and construction industries. The various uses of tannins need to be put into perspective with regards to possible further advances and future potential for value-added applications. Tannins are employed in a wide range of industrial applications, including the production of leather and wood adhesives, accounting for almost 90% of the global commercial tannin output. The shortage of natural resources, as well as the growing environmental concerns related to the reduction of harmful emissions of formaldehyde or isocyanates used in the production of polyurethanes, have driven the industrial and academic interest towards the development of tannin-based bio-PUs as sustainable alternative materials with satisfactory characteristics. The aim of the present review is to comprehensively summarize the current state of research in the field of development, characterization, and application of tannin-derived, bio-based polyurethane resins. The successful synthesis process of the tannin-based bio-PUs was characterized by Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), MALDI-TOF mass spectrometry, and gel permeation chromatography (GPC) analyses.

13 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
SHSucia Okta Handika
Sucia Okta Handika
Muhammad Adly Rahandi LubisMuhammad Adly Rahandi Lubis
Muhammad Adly Rahandi Lubis
RSRita Kartika Sari
Rita Kartika Sari
RLRaden Permana Budi Laksana
Raden Permana Budi Laksana
Petar AntovPetar Antov
Petar Antov
AIApri Heri Iswanto
Apri Heri Iswanto
In this study, lignin isolated and fractionated from black liquor was used as a pre-polymer to prepare bio-polyurethane (Bio-PU) resin, and the resin was impregnated into ramie fiber (Boehmeria nivea (L.) Gaudich) to improve its thermal and mechanical properties. The isolated lignin was fractionated by one-step fractionation using two different solvents, i.e., methanol (MeOH) and acetone (Ac). Each fractionated lignin was dissolved in NaOH and then reacted with a polymeric 4,4-methane diphenyl diisocyanate (pMDI) polymer at an NCO/OH mole ratio of 0.3. The resulting Bio-PU was then used in the impregnation of ramie fiber. The characterization of lignin, Bio-PU, and ramie fiber was carried out using several techniques, i.e., Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), pyrolysis-gas-chromatography-mass-spectroscopy (Py-GCMS), Micro Confocal Raman spectroscopy, and an evaluation of fiber mechanical properties (modulus of elasticity and tensile strength). Impregnation of Bio-PU into ramie fiber resulted in weight gain ranging from 6% to 15%, and the values increased when extending the impregnation time. The reaction between the NCO group on Bio-PU and the OH group on ramie fiber forms a C=O group of urethane as confirmed by FTIR and Micro Confocal Raman spectroscopies at a wavenumber of 1600 cm−1. Based on the TGA analysis, ramie fiber with lignin-based Bio-PU had better thermal properties than ramie fiber before impregnation with a greater weight residue of 21.7%. The mechanical properties of ramie fiber also increased after impregnation with lignin-based Bio-PU, resulting in a modulus of elasticity of 31 GPa for ramie-L-isolated and a tensile strength of 577 MPa for ramie-L-Ac. The enhanced thermal and mechanical properties of impregnated ramie fiber with lignin-based Bio-PU resins could increase the added value of ramie fiber and enhance its more comprehensive industrial application as a functional material.

15 December 2015 in IAWA Journal
Verified
Journal Article
Closed access
PDF file
WDWayan Darmawan
Wayan Darmawan
DNDodi Nandika
Dodi Nandika
RSRita Kartika Sari
Rita Kartika Sari
ASAnnisah Sitompul
Annisah Sitompul
IRIstie Rahayu
Istie Rahayu
DGDouglas Gardner
Douglas Gardner
Teak wood (Tectona grandis) as an important forest resource in Indonesia has been processed to wood furniture in large quantities to fulfill an increasing need of both local and international consumers. To satisfy the increasing demand for wood products, teak wood has been supplied from the State forests (Perhutani) and Community teak plantations. Community teak has been harvested at shorter age rotations (7–10 years) than Perhutani teak (40–60 years). This paper discusses the occurrence and characteristics of juvenile wood in Perhutani and Community teak based on density, shrinkage, bending strength (modulus of rupture - MOR, modulus of elasticity - MOE), fiber length, and microfibril angle (MFA). A segmented modeling approach was used to find the juvenile mature transition. Fiber length and MFA appear to be good anatomical indicators of radial increment demarcation between juvenile and mature wood, although maturation radial increment varies slightly between the fiber length and MFA. The use of radial increment density, shrinkage, MOR, and MOE were not appropriate, because of low coefficients of determination and a large range of radial increment for transition from juvenile to mature wood. The maturations were estimated to start at radial increments 10 and 14 cm from the pith by fiber length, and 11 and 15 cm from the pith by MFA for Perhutani and Community teak, respectively. The projected figures for the proportion of juvenile wood at breast height for Perhutani and Community teak were 65% and 100%, respectively. The results also indicate that short-rotation Community teak was not remarkably inferior in shrinkage, MOE and MOR compared to Perhutani teak, although it was less dense, less attractive and less durable due to lower heartwood content. Therefore, careful attention should be given to the use of the Community teak in some wood-processing technologies.

1 July 2015 in Industrial Crops and Products
Verified
Journal Article
Closed access
AWArip Wijayanto
Arip Wijayanto
SDStéphane Dumarçay
Stéphane Dumarçay
CGChristine Gérardin-Charbonnier
Christine Gérardin-Charbonnier
RSRita Kartika Sari
Rita Kartika Sari
WSWasrin Syafii
Wasrin Syafii
PGPhilippe Gérardin
Philippe Gérardin

29 March 2022 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
MAManggar Arum Aristri
Manggar Arum Aristri
MLMuhammad Adly Rahandi Lubis
Muhammad Adly Rahandi Lubis
RLRaden Permana Budi Laksana
Raden Permana Budi Laksana
RSRita Kartika Sari
Rita Kartika Sari
AIApri Heri Iswanto
Apri Heri Iswanto
APAntonio Pizzi
Antonio Pizzi