Sasa Alexandra Yehia

Dr. Sasa Alexandra Yehia

National Institute for Laser Plasma and Radiation Physics
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MZMaria-Elena Zarif
Maria-Elena Zarif
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
Bogdan BitaBogdan Bita
Bogdan Bita
INIrina Negut
Irina Negut
CLClaudiu Locovei
Claudiu Locovei
AGAndreea Groza
Andreea Groza
In this work, we report the synthesis of calcium phosphate–chitosan composite layers. Calcium phosphate layers were deposited on titanium substrates by radio-frequency magnetron sputtering technique by varying the substrate temperature from room temperature (25 °C) up to 100 and 300 °C. Further, chitosan was deposited by matrix-assisted pulsed laser evaporation technique on the calcium phosphate layers. The temperature at the substrate during the deposition process of calcium phosphate layers plays an important role in the embedding of chitosan, as scanning electron microscopy analysis showed. The degree of chitosan incorporation into the calcium phosphate layers significantly influence the physico-chemical properties and the adherence strength of the resulted layers to the substrates. For example, the decreases of Ca/P ratio at the addition of chitosan suggests that a calcium deficient hydroxyapatite structure is formed when the CaP layers are generated on Ti substrates kept at room temperature during the deposition process. The Fourier transform infrared spectroscopy analysis of the samples suggest that the PO43−/CO32− substitution is possible. The X-ray diffraction spectra indicated that the crystalline structure of the calcium phosphate layers obtained at the 300 °C substrate temperature is disturbed by the addition of chitosan. The adherence strength of the composite layers to the titanium substrates is diminished after the chitosan deposition. However, no complete exfoliation of the layers was observed.

Verified
Journal Article
Open access
PDF file
MZMaria-Elena Zarif
Maria-Elena Zarif
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
Bogdan BitaBogdan Bita
Bogdan Bita
VSVeronica Satulu
Veronica Satulu
SVSorin Vizireanu
Sorin Vizireanu
AFAlexandru-Titus Farcasiu
Alexandru-Titus Farcasiu
Despite the technological progress of the last decade, dental caries is still the most frequent oral health threat in children and adults alike. Such a condition has multiple triggers and is caused mainly by enamel degradation under the acidic attack of microbial cells, which compose the biofilm of the dental plaque. The biofilm of the dental plaque is a multispecific microbial consortium that periodically develops on mammalian teeth. It can be partially removed through mechanical forces by individual brushing or in specialized oral care facilities. Inhibition of microbial attachment and biofilm formation, as well as methods to strengthen dental enamel to microbial attack, represent the key factors in caries prevention. The purpose of this study was to elaborate a cold plasma-based method in order to modulate microbial attachment and biofilm formation and to improve the retention of fluoride (F−) in an enamel-like hydroxyapatite (HAP) model sample. Our results showed improved F retention in the HAP model, which correlated with an increased antimicrobial and antibiofilm effect. The obtained cold plasma with a dual effect exhibited through biofilm modulation and enamel strengthening through fluoridation is intended for dental application, such as preventing and treating dental caries and enamel deterioration.

5 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MZMaria-Elena Zarif
Maria-Elena Zarif
Bogdan BitaBogdan Bita
Bogdan Bita
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
INIrina Negut
Irina Negut
Gratiela GRADISTEANU PircalabioruGratiela GRADISTEANU Pircalabioru
Gratiela GRADISTEANU Pircalabioru
AGAndreea Groza
Andreea Groza
In this work results are presented on the evaluation of HAp, HApSr, HAp_CS, and HApSr_CS layers deposited on Ti substrates regarding L929 cell viability and cytotoxicity as well as antimicrobial activity against Staphylococcus aureus, in connection with their physicochemical properties. The HAp and HApSr layers generated by radio-frequency magnetron sputtering technique were further covered with chitosan by a matrix-assisted pulsed laser evaporation technique. During the plasma depositions, the Ti substrates were heated externally by a home-made oven above 100 °C. The HApSr_CS layers generated on the unpolished Ti substrates at 100 °C and 400 °C showed the highest biocompatibility properties and antimicrobial activity against Staphylococcus aureus. The morphology of the layer surfaces, revealed by scanning electron microscopy, is dependent on substrate temperature and substrate surface roughness. The optically polished surfaces of Ti substrates revealed grain-like and microchannel structure morphologies of the layers deposited at 25 °C substrate temperature and 400 °C, respectively. Chitosan has no major influence on HAp and HApSr layer surface morphologies. X-ray photoelectron spectroscopy indicated the presence of Ca 2p3/2 peak characteristic of the HAp structure even in the case of the HApSr_CS samples generated at a 400 °C substrate temperature. Fourier transform infrared spectroscopy investigations showed shifts in the wavenumber positions of the P-O absorption bands as a function of Sr or chitosan presence in the HAp layers generated at 25, 100, and 400 °C substrate temperatures.

1 October 2020 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
Bogdan BitaBogdan Bita
Bogdan Bita
SVSorin Vizireanu
Sorin Vizireanu
DSDaniel Stoica
Daniel Stoica
VIValentin Ion
Valentin Ion
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
GDGheorghe Dinescu
Gheorghe Dinescu
In this study, we investigated the morphological, structural, and electrical properties of carbon nanowall (CNW) structures obtained by plasma-enhanced chemical vapour deposition (PECVD) and underlined the induced effects of argon/nitrogen (Ar/N2) postsynthesis plasma treatment on the electrical behaviour. The top view and cross-section scanning electron microscopy micrographs revealed that the fabricated samples are about 18 μm height, and the edges are less than 10 nm. The Raman analysis showed the presence of the specific peaks of graphene-based materials, i.e., D-band, G-band, D′-band, 2D-band, and D+G-band. The average values of the electrical resistance of fabricated samples were evaluated by current-voltage characteristics acquired at room temperature, in the ranges of 0 V–0.2 V, and an increase was noticed with about 50% after the Ar/N2 postsynthesis plasma treatment compared to pristine samples. Moreover, the Hall measurements proved that the obtained CNW structures had p-type conductivity (Hall coefficient was 0.206 m3/C), and the concentration of charge carriers was 7.8×1019 cm-3, at room temperature.

9 August 2020 in Plasma Chemistry and Plasma Processing
Verified
Journal Article
Closed access
PDF file
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
MZM. E. Zarif
M. E. Zarif
Bogdan BitaBogdan Bita
Bogdan Bita
MTM. Teodorescu
M. Teodorescu
LCL. G. Carpen
L. G. Carpen
GDG. Dinescu
G. Dinescu

28 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MZMaria-Elena Zarif
Maria-Elena Zarif
Bogdan BitaBogdan Bita
Bogdan Bita
Sasa Alexandra YehiaSasa Alexandra Yehia
Sasa Alexandra Yehia
INIrina Negut
Irina Negut
AGAndreea Groza
Andreea Groza
Strontium-doped calcium phosphate/chitosan films were synthetized on silicon substrates using the radio-frequency magnetron sputtering technique and the matrix-assisted pulsed laser evaporation technique. The deposition conditions associated with the radio-frequency magnetron sputtering discharge, in particular, include the high temperature at the substrate, which promotes the formation of strontium-doped tetra calcium phosphate layers. The physical and chemical processes associated with the deposition of chitosan on strontium-doped calcium phosphate layers were investigated using Fourier Transform Infrared Spectroscopy, Energy Dispersive X-ray Spectroscopy, and Scanning Electron Microscopy. Mass spectrometry coupled with laser induced ablation of the composite films proved to be a useful tool in the detection of the molecular ions characteristic to chitosan chemical structure.