Nurgul Alibekova

Dr. Nurgul Alibekova

Assoc Prof, Dr
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Askar ZhussupbekovAskar Zhussupbekov
Askar Zhussupbekov
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
SASungat Akhazhanov
Sungat Akhazhanov
Assel SarsembayevaAssel Sarsembayeva
Assel Sarsembayeva
Development of a geotechnical database for the young capital of Kazakhstan, Nur-Sultan city, became a paramount concern of both the scientific community and industry. The creation of the Kazakhstan model of the geotechnical database was based on a fixed dataset which included a city map with determined X, Y, and H coordinates and the user generated data obtained from the materials of engineering and geological surveys from more than 2000 boreholes. Based on the assessment of the built-up area of the city, six main engineering-geological elements (EGE) were identified. The territory of the city was regrouped into eight zones instead of the previous six based on the geological origin and stratigraphy interposition of the EGE. Engineering properties of the soils were considered for physical and mechanical characteristics, where the plasticity limits demonstrated an accurate correlation to the elasticity modulus E and distribution boundaries between the alluvial and eluvial types of the soil on the graph. So, the increased liquid and plastic limits are replicated by higher values of elasticity modulus E, and hence better strength characteristics of a particular soil layer and vice versa, while the moisture content and soil density did not show any obvious pattern and requires additional verification on the construction site. Finally, a geotechnical map was built for the driven piles and the optimal variations in the pile length for each zone were determined.

1 April 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
LALyazat Aruova
Lyazat Aruova
ZOZ N Ospanova
Z N Ospanova
BAB B Aruov
B B Aruov
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
ZSZh A Shashpan
Zh A Shashpan
AKA T Kyrgizbaev
A T Kyrgizbaev
The use of large-span structures made of glued wood in countries with large timber reserves in Finland, Sweden, Norway, Russia, the USA and Canada has shown that this can be quite interesting and expressive from the architectural position of the building. Sports facilities, sports and sports facilities, sports facilities, sports and cultural facilities. The practice of building bridges made of glued wood in these countries shows that they have been in operation for decades without additional operating costs. Glued wood in modern conditions, when productive flame retardants are used that protect it from fire, antiseptics from possible decay expand the scope of such structures. One of the important obstacles to the limiting applications of large-span glued wooden structures is the complexity of the solution nodes. Bearing structures experience difficulties when exposed to static and cyclic loads. Cyclic loads can be caused by wind loads, production equipment, traffic, and seismic processes. Reinforcement in wood, reinforcement and reinforcement under load. Wood and metal are resistant to cyclic loads. Studies will be conducted at the border of the elements to be glued. This article presents the results of tests for the effects of static and cyclic loads on reinforcement from a 14 mm reinforcing bar of class A5 on FRF-50T along natural-sized glued wood fibers. Certain coefficients of the endurance of the compound when exposed to cyclic loads with two load asymmetry coefficients p = 0.5 and p = 0.2.

21 March 2024 in Technobius
Verified
Journal Article
Open access
PDF file
AAAliya K. Aldungarova
Aliya K. Aldungarova
AMAssel Mukhamejanova
Assel Mukhamejanova
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
SKSabit Karaulov
Sabit Karaulov
DADaniyar Akbulatovich Akhmetov
Daniyar Akbulatovich Akhmetov
The article considers the application of geotechnical interpolation using ArcGIS software to determine the intermediate geotechnical properties of soils at a construction site in a residential complex in Astana, Esil district. The study is based on data from 8 boreholes drilled to a depth of 26 meters, and the purpose of the work is to use the kriging interpolation method to determine intermediate soil properties. The raw data include the results of analyzing the physical and mechanical properties of the soils from the boreholes, which served as a basis for interpolation and mapping. The results of the study are presented in the form of maps showing the intermediate mechanical properties of the soil at depths of 5, 10 and 15 m. The maps allow obtaining more accurate intermediate values. The proposed methodology not only facilitates the work of designers, but also provides data for realistic scenarios of soil strength and deformation characteristics, which significantly influences the selection of optimal types and sizes of foundations.

28 July 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BUBulat B. Unaibayev
Bulat B. Unaibayev
BUBulat Zh. Unaibayev
Bulat Zh. Unaibayev
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
Assel SarsembayevaAssel Sarsembayeva
Assel Sarsembayeva
Designing advanced methods of corrosion protection and increasing the bearing capacity of pile foundations on saline clayey soils is a priority geotechnical task in Kazakhstan. The formation of a suffusion-resistant waterproof shell was achieved by silicatization of a borehole before concreting, by the installation of a mold into the borehole and the impregnation of a sodium silicate solution into the space between the mold and the soil under pressure. After coagulation of the silicate solution, the mold was removed and the formed shell was filled with corrosion-resistant concrete. Full-scale static pile load tests were conducted in the construction site “Retaining wall on Mount Koktobe” in Almaty. The bearing capacity of the piles with the protective silicate shell exceeded the bearing capacity of an ordinary pile by 2.5 times on average without wetting the site, and 3.2 times after prolonged wetting. The numerical model had a close relationship with the average experimental curve obtained when conducting six static pile load tests with the protective shell. A large economic effect of the developed piling technology with a protective shell was achieved, with a significant reduction in the cost of piling, equal to 27.85%.

13 September 2024 in Technobius
Verified
Journal Article
Open access
PDF file
AAAliya K. Aldungarova
Aliya K. Aldungarova
Tymarkul MuzdybayevaTymarkul Muzdybayeva
Tymarkul Muzdybayeva
AMAssel Mukhamejanova
Assel Mukhamejanova
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
Khrystyna MoskalovaKhrystyna Moskalova
Khrystyna Moskalova
SKSabit Karaulov
Sabit Karaulov
This study compares Kriging and Inverse Distance Weighting (IDW) spatial interpolation methods for estimating intermediate soil properties at a construction site in Astana, Kazakhstan. Using data from eight boreholes, seven engineering geological elements (EGE) were identified and analyzed at 6.5 m and 11.5 m depths. Kriging produced deformation modulus values ranging from -0.29 to 18.99 MPa at 6.5 m and -0.51 to 23.94 MPa at 11.5 m, capturing more spatial variability compared to IDW, which provided ranges of 3.3 to 18.99 MPa and 2.6 to 23.99 MPa, respectively. Kriging’s ability to account for spatial correlations resulted in more accurate predictions, particularly in areas with complex subsurface variability. Meanwhile, IDW offered reliable localized results, effective in more uniform geological conditions. The findings demonstrate that both methods are valuable for geotechnical applications, with the choice depending on data density and site variability.

1 December 2023 in Technobius
Verified
Journal Article
Open access
PDF file
AAAliya K. Aldungarova
Aliya K. Aldungarova
AMAssel Mukhamejanova
Assel Mukhamejanova
Nurgul AlibekovaNurgul Alibekova
Nurgul Alibekova
Aleksej AniskinAleksej Aniskin
Aleksej Aniskin
This paper deals with the problem of constructing new buildings in old urban areas, with emphasis on determining the actual dimensions of the active footprint of existing foundations. The study focuses on the problems associated with limited space for construction, geotechnical conditions, soil characteristics, as well as the features of near-surface foundations and methods for calculating their settlement. The paper proposes a methodology that, when applied, provides a more accurate and reliable determination of non-uniformity of base deformations of neighboring foundations. This is achieved by taking into account a number of factors, such as the sequence of erection, soil compaction, the size of the footings and the magnitude of loads. The proposed approach also substantiates the optimal spacing of the designed neighboring foundations, helping to reduce the negative impact on existing structures and ensuring the stability and durability of both new and existing structures. The results of this study represent a significant contribution to the development of effective construction solutions in limited urban spaces, and can be used by designers and builders to optimize construction processes and ensure the stability of buildings in complex geotechnical conditions.