The study examined the intricate relationships between embankment slope configurations, toe drain designs, and drawdown scenarios. It utilized a unique combination of numerical, physical, and mathematical models. The investigation involved 16 numerical models and 8 physical models with distinct characteristics. The research explored the correlations of key parameters: matric suction, horizontal water conductivity, time, and factor of safety. The factor of safety values varied from 0.62 to 1.03 as a result of the different investigated combinations. For instance, a 1:2 embankment slope without a toe drain under instantaneous drawdown led to the factor of safety values ranging from 1.22 to 1.57. Additionally, incorporating elements like a 30 m toe drain and a 1 m per day drawdown rate influenced these values, with extremes recorded from 1.337 to 2.21, shedding light on embankment stability under diverse conditions and configurations. When subjected to a 1 m per day drawdown, water flow rates decreased significantly at the upstream face and increased downstream, accompanied by an increase in water mass flux at the upstream face and a decrease at the downstream toe, suggesting dynamic changes in water behavior in response to drawdown. Moreover, the findings unveiled significant correlations between matric suction and time (correlation coefficient of 0.950) and factor of safety and water conductivity (correlation coefficient of 0.750). Conversely, a distinct negative correlation emerged between matric suction and factor of safety (correlation coefficient of −0.864). The study’s distinctive insights contribute to our understanding of seepage behavior and dam stability across varied scenarios, offering valuable input for resilient dam construction approaches that will ensure the longevity and effectiveness of these essential structures.

Development of a geotechnical database for the young capital of Kazakhstan, Nur-Sultan city, became a paramount concern of both the scientific community and industry. The creation of the Kazakhstan model of the geotechnical database was based on a fixed dataset which included a city map with determined X, Y, and H coordinates and the user generated data obtained from the materials of engineering and geological surveys from more than 2000 boreholes. Based on the assessment of the built-up area of the city, six main engineering-geological elements (EGE) were identified. The territory of the city was regrouped into eight zones instead of the previous six based on the geological origin and stratigraphy interposition of the EGE. Engineering properties of the soils were considered for physical and mechanical characteristics, where the plasticity limits demonstrated an accurate correlation to the elasticity modulus E and distribution boundaries between the alluvial and eluvial types of the soil on the graph. So, the increased liquid and plastic limits are replicated by higher values of elasticity modulus E, and hence better strength characteristics of a particular soil layer and vice versa, while the moisture content and soil density did not show any obvious pattern and requires additional verification on the construction site. Finally, a geotechnical map was built for the driven piles and the optimal variations in the pile length for each zone were determined.

Manufacturers of building materials strive to optimize the three basic concrete properties—strength, durability, and shrinkage deformation, of which the focus is generally on the durability in the structure when designing and monitoring the poured concrete. Studying concretes’ structural performance and the change in their characteristics over time enables the solution of many important issues associated with the design of reliable, durable, and cost-effective buildings and structures. This article presents studies aimed at improving the physical, technical, and operational characteristics of cement concrete and reducing cement consumption in heavy concretes through the use of complex modifiers and volumetric fiber reinforcement. Four concrete compositions of widely recognized grades were developed, of which samples were molded and tested for compressive and flexural strength, frost resistance, volumetric water absorption, and density. Test results confirmed the possibility of binder (cement) economy up to 18% and increasing frost resistance up to W300 when using microsilica, reduction in volumetric water absorption of up to 40% when using both microsilica and hyperplasticizer, and increasing flexural strength by over 30% when using polymer fiber. The developed compositions passed the industrial tests, and were successfully introduced in the production process of the operating reinforced concrete products’ manufacturer.

Loads cause vertical movements of the foundations of all the structures. Their magnitude determines the building safe operation. A closed analytical solution to the problem of the linear elastic theory for the distribution of stresses and strains in a homogeneous isotropic elastic foundation has been presented. The article considers the calculation of the stress-strain state of an elastic half-plane by the method in displacement functions. The theory of calculating an elastic half-plane has been built. New formulas have been are found that determine displacements and stresses at any points of an elastic foundation. An example of calculating an elastic half-plane under the action of a normal and tangential loads has been given.

This study develops a refined beam theory that improves upon classical models by accurately capturing transverse shear deformation without requiring shear correction factors. The proposed approach maintains the simplicity of the Bernoulli-Euler theory while achieving higher precision in predicting transverse deflections, axial stresses, and shear stresses. A linearly elastic, homogeneous, and isotropic material with a uniform rectangular cross-section is assumed. The accuracy of the proposed theory is validated through comparisons with advanced shear deformation theories, showing that it provides reliable results with reduced computational complexity. Furthermore, the theory's applicability is demonstrated through case studies, showcasing its effectiveness in practical structural design and analysis Numerical comparisons indicate minimal percentage differences, with a maximum deviation of -0.37% for simply supported beams and -0.82% for fully clamped beams in transverse deflection predictions. The results align well with advanced shear deformation theories and two-dimensional elasticity solutions, confirming the model’s reliability. This theory enhances structural analysis, particularly for thick and shear-deformable beams, with potential extensions to anisotropic materials, dynamic loading, and complex boundary conditions in future research.