Extracting accurate surface reflectance from multispectral UAV (unmanned aerial vehicle) imagery is a fundamental task in remote sensing. However, most studies have focused on short-endurance UAVs, with limited attention given to long-endurance UAVs due to the challenges posed by dynamically changing incident radiative energy. This study addresses this gap by employing a solar trajectory model (STM) to accurately estimate incident radiative energy, thereby improving reflectance calculation precision. The STM method addresses the following key issues: The experimental results demonstrated that the root mean square error (RMSE) of the STM method in Shanghai was 15.80% compared to the standard reflectance, which is 51% lower than the downwelling light sensor (DLS) method and 37% lower than the traditional method. This indicates that the STM method provides results that are more accurate, aligning closely with standard values. In Tianjin, the RMSE was 24% lower than the DLS method and 65% lower than the traditional method. The STM effectively mitigates inconsistencies in incident radiative energy across different image strips captured by long-endurance UAVs, ensuring uniform reflectance accuracy in digital orthophoto maps (DOMs). The proportion of corrected reflectance errors within the ideal range (±10%) increased by 24% compared to the histogram matching method. Furthermore, the optimal flight duration for long-endurance UAVs launched at noon was extended from 50 min to 150 min. In conclusion, this study demonstrates that applying the STM to correct multispectral imagery obtained from long-endurance UAVs significantly enhances reflectance calculation accuracy for DOMs, offering a practical solution for improving reflectance imagery quality under clear-sky conditions.
The downwelling light sensor (DLS) is the industry-standard solution for generating UAV-based digital orthophoto maps (DOMs). Current mainstream DLS correction methods primarily rely on angle compensation. However, due to the temporal mismatch between the DLS sampling intervals and the exposure times of multispectral cameras, as well as external disturbances such as strong wind gusts and abrupt changes in flight attitude, DLS data often become unreliable, particularly at UAV turning points. Building upon traditional angle compensation methods, this study proposes an improved correction approach—FIM-DC (Fitting and Interpolation Model-based Data Correction)—specifically designed for data collection under clear-sky conditions and stable atmospheric illumination, with the goal of significantly enhancing the accuracy of reflectance retrieval. The method addresses three key issues: (1) field tests conducted in the Qingpu region show that FIM-DC markedly reduces the standard deviation of reflectance at tie points across multiple spectral bands and flight sessions, with the most substantial reduction from 15.07% to 0.58%; (2) it effectively mitigates inconsistencies in reflectance within image mosaics caused by anomalous DLS readings, thereby improving the uniformity of DOMs; and (3) FIM-DC accurately corrects the spectral curves of six land cover types in anomalous images, making them consistent with those from non-anomalous images. In summary, this study demonstrates that integrating FIM-DC into DLS data correction workflows for UAV-based multispectral imagery significantly enhances reflectance calculation accuracy and provides a robust solution for improving image quality under stable illumination conditions.
Yield prediction in longline aquaculture is essential for evaluating environmental impacts, facilitating risk assessment, and promoting sustainable management in fisheries. However, since cultured organisms in longline aquaculture are submerged and cannot be directly observed, existing yield prediction approaches are mostly based on indirect environmental proxies, which often lead to unsatisfactory accuracy. The Shadow Geometry Inversion for Aquaculture (SGIA) method enables direct and accurate yield estimation in longline aquaculture by utilizing the submergence state of buoys to infer load, which is determined by the weight of the cultured organisms and estimated by shadow lengths combined with solar altitude angles and buoy physical parameters in high-resolution unmanned aerial vehicle (UAV) imagery. Experiments have been conducted in a water body located in Shanghai and Fuding to validate the effectiveness of the SGIA method. The best results were achieved under solar altitudes of 10–25° and calm water conditions. Under these conditions, the SGIA-predicted yields closely matched the measured loads in the Shanghai controlled experiment (R2 = 0.985, MAPE = 9.19%). In the Fuding field application, the model effectively captured spatial variations in buoy loads across the farming area, demonstrating its practicality and scalability for large-scale yield mapping in real aquaculture environments.
3 June 2026 in Journal of the Indian Society of Remote Sensing
Morphometric information provides quantitative descriptors of cetacean size and shape and may support future assessments of individual condition and population status when combined with appropriate biological calibration. However, conventional contact-based measurements are difficult to apply to free-ranging Yangtze finless porpoises (Neophocaena asiaeorientalis). UAV imagery offers a non-contact means of acquiring porpoise morphometric data, but automated workflows for converting UAV observations into reliable body-surface measurements remain limited. To address this gap, an oriented detection-guided SAM2 morphometric workflow, termed ODG-SAM2-Morph, was developed to automatically extract body-surface morphometric parameters from UAV imagery. The workflow integrates YOLO26-OBB for oriented target localization, SAM2 for prompt-guided body-surface segmentation, and differentiated morphometric extraction strategies for complete-body and partial-body samples. Guided by oriented detections, the small SAM2 model with the R-Box + 1FG prompt generated body-surface masks with mean IoU, mean Dice, Precision, and Recall values of 0.824, 0.901, 0.883, and 0.932, respectively. For complete-body samples, automatically extracted body-length and body-width parameters showed preliminary agreement with manual measurements. For 114 partial-body samples, the automatically extracted maximum visible body width agreed reasonably well with manual measurements, with a MAE of 3.32 cm and a MAPE of 11.93%. Continuous-sequence analysis further showed that the representativeness of maximum visible body width depended on trunk exposure, contour clarity, body posture, and inter-frame stability. By converting UAV observations into quantitative image-derived morphometric measurements, ODG-SAM2-Morph provides a practical basis for non-contact morphometric monitoring of Yangtze finless porpoises under natural survey conditions.