Svetlana Risteska

Prof. Dr. Svetlana Risteska

Faculty of Technical Sciences and Computer Science, International Slavic University Gavrilo Romanovich Derzhavin, Sveti Nikole, North Macedonia
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SSSara Srebrenkoska
Sara Srebrenkoska
FKFilip Kochoski
Filip Kochoski
VSVineta Srebrenkoska
Vineta Srebrenkoska
SRSvetlana Risteska
Svetlana Risteska
Renata KotyniaRenata Kotynia
Renata Kotynia
The aim of this study was to investigate the mechanical and thermal properties of composite pipes based on epoxy resin and glass fibers produced by filament winding (FW) technology. Epoxy resins are widely used polymers in FW composite structures. The thermal characterization of the neat epoxy resin, curing, and post-curing characteristics for the determination of polymerization and glass transition temperature was performed, which is important for the mechanical properties of polymer composite pipes. In the present work, the applicability of the full factorial experimental design in predicting the hoop tensile and compressive strengths of glass fiber/epoxy resin composite pipes was investigated. The composite pipes in accordance with the 23 full factorial experimental design by using of three parameters and two levels of variation were prepared. The winding speed of the composites was taken to be the first factor, the second was the fiber tension, and the third was winding angle. To approximate the response, i.e., the mechanical properties of the composite pipes within the study domain, the first-order linear model with the interaction was used. The influence of each individual factor to the response function was established, as well as the influence of the interaction of the two and three factors. Additionally, those results were completed with the thermal characterization of the polymer composite pipes. From received results from mechanical and thermal characterization, it was concluded that the properties of composite specimens were highly affected by the analyzed parameters in filament winding technology. It was found that the estimated first-degree regression equation with the interaction gave a very good approximation of the experimental results of the hoop tensile and the compressive strengths of composite pipes within the study domain.

28 July 2015 in Quality of Life (Banja Luka) - APEIRON
Verified
Journal Article
Open access
PDF file
SNSimona Naseva
Simona Naseva
VSVineta Srebrenkoska
Vineta Srebrenkoska
SRSvetlana Risteska
Svetlana Risteska
MSMaja Stefanovska
Maja Stefanovska
SSSara Srebrenkoska
Sara Srebrenkoska
The aim of this study is to investigate the mechanical properties of continuous glass fiber reinforced composite tubes produced by filament winding technique with three different winding angles. With help of split-disk tests hoop tensile properties of selected specimens were determined, where reliable results were obtained with low standard deviations. It was observed that bigger winding angle lead to higher hoop tensile properties of filament wound tubular samples. Also, the effect of reinforcement direction on the mechanical performances of these composites has been presented. Fiber fracture and fiber-matrix debonding is observed to be the dominant failure mechanisms by samples winded with bigger winding angles, whereas delamination in addition to these mechanisms is detected by samples with smaller winding angles. From received results it is concluded that, mechanical properties of composite specimens are depended from winding angles in filament winding technology.With help of conducted SEM analysis good merger between glass fibers and the epoxy matrix was seen, but cracks within plies and broken fiber were noticed, due to the high fiber branching.

13 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SRSvetlana Risteska
Svetlana Risteska
VSVineta Srebrenkoska
Vineta Srebrenkoska
SZSilvana Zhezhova
Silvana Zhezhova
SSSara Srebrenkoska
Sara Srebrenkoska
SRSanja Risteski
Sanja Risteski
SLSaska Saska Golomeova Longurova
Saska Saska Golomeova Longurova
Investigating the impact of textile structure reinforcement on the mechanical characteristics of polymer composites produced by the compression molding technique was the goal of this work. An epoxy resin system served as the matrix, and various woven (plain, twill, basket), nonwoven (mat), and unidirectional (UD) textile structures made from E-glass fibers were employed as reinforcement elements. Compression molding of pre-impregnated textile materials (prepregs) was used to create the composites. The well-impregnated textile structures with resin into prepreg and the good interface between layers of the composites were verified during the manufacture of the polymer–textile composites using DSC thermal analysis and an SEM microscope. For the mechanical behavior, flexural properties were determined. The composite samples with unidirectional prepreg reinforcement have the highest longitudinal flexural strengths at roughly 900 MPa. The woven prepreg-based composite laminates show balanced flexural properties in both directions. Composites based on plane and basket prepregs have a flexural strength of about 450 MPa. Their flexural strength is over 20% lower than that of the samples made using twill prepreg. In both directions, nonwoven prepreg-reinforced composite samples show the least amount of resistance to bending stresses (flexural strength of roughly 150 MPa).

17 March 2020 in Materials Science
Verified
Journal Article
Open access
PDF file
SRSvetlana Risteska
Svetlana Risteska
Anka Trajkovska PetkoskaAnka Trajkovska Petkoska
Anka Trajkovska Petkoska
SSSamoil Samak
Samoil Samak
MDMarian Drienovsky
Marian Drienovsky
In situ consolidation of thermoplastic composites by Automated Tape Placement (ATP) is challenging. High quality ATP grade pre-preg material and tape head equipped with an efficient heat sources like lasers offer an opportunity towards high deposition rates and improved mechanical properties of composite materials. In this study uni-directional carbon fiber/ polyphenylene sulfide (UD tape prepreg CF/PPS), carbon fiber/polyetheretherketone (UD tape prepreg CF/PEEK) as well as blend of carbon fiber/polyetheretherketone/polyphenylene sulfide (UD tapes prepregs CF/PEEK/PPS) laminates are compared in terms of their properties after beeing processed by ATP technology. CF/PPS, CF/PEEK and blend CF/PPS/PEEK laminate specimens were processed using in-situ laser-assisted ATP (LATP) process. LATP processing parameters used in this study were chosen based on a preliminary trials; the results provide a basis for refinement of these parameters and prepreg material with an optimal and balanced set of final mechanical properties. This study showed an attempt how to manage the processing parameters for LATP process and to obtain composite materials with tailored properties. The process for production of thermoplastic plates with LATP head in general is a process that is governed by many parameters such as: laser power, angle of incidence, roller pressure and temperature, placement speed, tool temperature, then types of the roller material and the tool material. These parameters are not subject of discussing in this paper; they are kept constant, and the goal of the paper is to manage the crystallinity level within the composite thermoplastic material during annealing step at different temperatures after LATP process. Also, the void content during the production process could be controlled. More particularly, the authors showed that composites based on PPS matrix manufactured with LATP process possess higher flexural strength, with less void content compared to samples based on PEEK matrix. These samples showed also higher crystallinity after annealing step.

19 October 2021 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SRSvetlana Risteska
Svetlana Risteska
SSSamoil Samak
Samoil Samak
VSVele Samak
Vele Samak
During LATP (laser automated tape placement), the compaction roller contacts the prepreg and affects the pressure distribution directly. Moreover, the design parameters of the roller are optimized with the aim of improving pressure uniformity. This paper examines the impact of the contact line and surface that depends on the compaction force, the design of the roller, the angle of inclination and the angle of inclination of the strip. These factors significantly affect the expansion of the tape, and it is important to determine it to avoid side effects in the production of composites (formation of gaps or overlaps). Their presence increases the percentage of pores of the final material and thus reduces the mechanical properties. The results show that the pressure uniformity can be improved significantly by design optimization of the roller, which indicates that higher bond quality between layers is achieved. The lower the speed and higher the compact force in this technology give better intimate contact with a lower percentage of voids and good mechanical characteristics.

23 September 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SRSvetlana Risteska
Svetlana Risteska
IVIvan Vasileski
Ivan Vasileski
EAEvgenija Gjorgjieska Angelovska
Evgenija Gjorgjieska Angelovska
APAleksandar Pižov
Aleksandar Pižov
Epoxidized soybean oil (ESO) is the oxidation product of soybean oil with hydrogen peroxide and either acetic or formic acid obtained by converting the double bonds into epoxy groups, which is non-toxic and of higher chemical reactivity. Oxidized soybean oil (ESO) has gained significant attention as a renewable and environmentally friendly alternative to petroleum-based epoxy resins. Derived from soybean oil through epoxidation of its unsaturated fatty acids, ESO offers a bio-based platform with inherent flexibility, low toxicity, and excellent chemical resistance. When used as a reactive diluent or primary component in epoxy formulations, ESO enhances the sustainability profile of coatings, adhesives, and composite materials. This study explores the mechanical properties of ESO-based epoxy systems, with particular attention to formulation strategies, crosslinking agents, and performance trade-offs compared to conventional epoxies. The incorporation of ESO not only reduces the reliance on fossil resources but also imparts tunable thermal and mechanical properties, making it suitable for a range of industrial and eco-friendly applications. The results underscore the potential of ESO as a viable component in next-generation green materials, contributing to circular economy and low-impact manufacturing. For the application of these materials in pultrusion and FW technologies, the Taguchi method is used to determine the most influential process parameters.