This paper presents experimental results and a numerical analysis of the reinforced concrete (RC) beams strengthened in flexure with various externally bonded carbon fiber-reinforced polymer (CFRP) configurations. The aim of the experimental work was to investigate the parameters that may delay the intermediate crack debonding of the bottom CFRP laminate, and increase the load carrying capacity and CFRP strength utilization ratio. Ten rectangular RC specimens with a clear span of 4.2 m , categorized in two series, were tested to evaluate the effect of using the additional U-shaped CFRP systems on the intermediate crack debonding of the bottom laminate. Two different configurations of the additional systems were proposed, namely, continuous U-shaped wet layup sheets and spaced side-bonded CFRP L-shaped laminates. The fiber orientation effect of the side-bonded sheets was also investigated. A numerical analysis using an incremental nonlinear displacement-controlled 3D finite-element (FE) model was developed...

This paper presents the test results of reinforced concrete slabs strengthened with prestressed and gradually anchored carbon fiber–reinforced polymer (CFRP) strips under monotonic and cyclic loading. To take full advantage of the externally bonded CFRP technique, it is beneficial to apply the laminates in a prestressed state, which relieves the stress in the steel reinforcement and reduces crack widths and deflection. The aim of the monotonic tests was to determine the strengthening efficiency of the new prestressing technique and to investigate serviceability and ultimate states. The cyclic tests were performed to identify the fatigue behavior of the strengthened slabs and to investigate the influence of long-term cyclic loading and elevated temperature on the bond properties of the prestressed CFRP laminates and the ductility and flexural strength of the strengthened slabs. A nonlinear analytical model of reinforced concrete members strengthened with passive and prestressed CFRP strips under static loading is proposed in the paper. A comparison of the experimental and predicted results reveals an excellent agreement in the full range of loading.

This paper presents an investigation on the practicability and structural efficiency of prestressed carbon-fiber–reinforced polymer (CFRP) strips with a gradient anchorage in the framework of a bridge-strengthening application in Poland. The nonmechanical anchorage system avoids the installation of metallic bolts and plates, with the exception of a temporary support frame. Two 18.4-m-long large-scale prestressed concrete girders were produced following the drawings of the existing bridge construction. One girder served as a reference, and the second one was strengthened with two prestressed CFRP strips. In this case, the initial negative cambering was leveled out by a layer of dry shotcrete. CFRP strips with a prestrain of 0.58% were applied for flexural upgrading. Both girders with a total length of 18.4 m were finally statically loaded up to failure to assess the strengthening efficiency in flexure of the retrofitting technique used. Tensile failure of the CFRP strips was reached, indicating an...