Tuan Minh Ngo

Dr. Tuan Minh Ngo

Thai Nguyen University, Thái Nguyên, Vietnam
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
TNTran Bao Ngoc
Tran Bao Ngoc
DMDuc Tran Minh
Duc Tran Minh
TNTuan Minh Ngo
Tuan Minh Ngo
VHVu Lai Hoang
Vu Lai Hoang
Tran The LongTran The Long
Tran The Long
Friction and very high temperature are still the major challenges in hard machining technology and they greatly affect cutting efficiency. The application of the MQL (minimum quantity lubrication) method, using nanoparticles in order to improve the cooling lubrication performance of the base cutting oil, has proven to be a promising solution. Hence, this work aimed to investigate the effectiveness of Al2O3/MoS2 hybrid nanofluid and Al2O3 and MoS2 mono nanofluids in the hard turning of 90CrSi steel (60–62 HRC) under an MQL environment. The Box-Behnken experimental design was used for three input variables, including nanoparticle concentration, air pressure, and air flow rate. Their influences on surface roughness and cutting forces were studied. According to the obtained results, it was shown that the application of hybrid nano cutting oils in MQL contributes to achieving better hard machining performance than the use of mono nanofluids. In particular, a lower cutting temperature is reported and the values of surface roughness Ra, back force Fp, and cutting force Fc were smaller and more stable under Al2O3/MoS2 hybrid nanofluid MQL than those under Al2O3 and MoS2 mono nanofluid MQL due to an improvement in cooling lubrication characteristics. Thus, this work provides a novel approach to study hybrid nanofluids for MQL hard machining.

6 July 2021 in Fluids
Verified
Journal Article
Open access
PDF file
DMDuc Tran Minh
Duc Tran Minh
Tran The LongTran The Long
Tran The Long
TNTuan Minh Ngo
Tuan Minh Ngo
Machining difficult-to-cut materials is one of the increasingly concerned issues in the metalworking industry. Low machinability and high cutting temperature generated from the contact zone are the main obstacles that need to be solved in order to improve economic and technical efficiency but still have to ensure environmental friendliness. The application of MQL method using nano cutting fluid is one of the suggested solutions to improve the cooling and lubricating performance of pure-MQL for machining difficult-to-cut materials. The main objective of this paper is to investigate the effects of nanofluid MQL (NFMQL) parameters including the fluid type, type of nanoparticles, air pressure and air flow rate on cutting forces and surface roughness in hard milling of 60Si2Mn hardened steel (50–52 HRC). Analysis of variance (ANOVA) was implemented to study the effects of investigated variables on hard machining performance. The most outstanding finding is that the main effects of the input variables and their interaction are deeply investigated to prove the better machinability and the superior cooling lubrication performance when machining under NFMQL condition. The experimental results indicate that the uses of smaller air pressure and higher air flow rate decrease the cutting forces and improve the surface quality. Al2O3 nanoparticles show the better results than MoS2 nanosheets. The applicability of soybean oil, a type of vegetable oil, is proven to be enlarged in hard milling by suspending nanoparticles, suitable for further studies in the field of sustainable manufacturing.

19 April 2022 in Fluids
Verified
Journal Article
Open access
PDF file
TNTuan Minh Ngo
Tuan Minh Ngo
DMDuc Tran Minh
Duc Tran Minh
Tran The LongTran The Long
Tran The Long
VHVu Lai Hoang
Vu Lai Hoang
TNTran Bao Ngoc
Tran Bao Ngoc
Cutting fluids used in the metal machining industry have exerted serious impacts on the environment and human health. In addition, the very high cutting heat and forces in machining-hardened steels have been a growing concern in the metal cutting field. Hence, new, eco-friendly cooling and lubricating techniques are necessary to study and develop. Minimum quantity lubrication (MQL) and minimum quantity cooling lubrication (MQCL) using nano cutting fluids have been proven as alternative solutions for machining difficult-to cut materials while retaining an environmentally friendly characteristic. Accordingly, this paper aims to analyze and evaluate the hard turning efficiency of 90CrSi (60 ÷ 62 HRC) steel using MQL and MQCL conditions, using Al2O3 and MoS2 nano cutting fluids. The 2k-p experimental design and analysis of variance (ANOVA) were used to study the influence of input parameters including fluid type, lubrication method, nanoparticle type, nanoparticle concentration, cutting speed and feed rate on surface roughness. The obtained results showed that the machinability of CNMG120404 TM T9125 carbide tools was improved and the highest machinable hardness was increased from 35 HRC to 60 ÷ 62 HRC (rising by approximately 71.4 ÷ 77.1%) by using the nanofluid MQL and MQCL methods. Furthermore, MQCL gives better performance than MQL, and the Al2O3 nanofluid exhibits the better result in terms of surface roughness values than the MoS2 nanofluid. Feed rate displays the strongest influence on surface roughness, while fluid type, nanoparticle concentration and cutting speed show low impacts. From these results, technical guidance will be provided for further studies using Al2O3 and MoS2 nano cutting fluids for MQL and MQCL methods, as well as their application in machining practice.

16 April 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
DMDuc Tran Minh
Duc Tran Minh
Tran The LongTran The Long
Tran The Long
TNTuan Minh Ngo
Tuan Minh Ngo
In recent years, the application of environmentally friendly cutting fluids in the metal cutting industry has been a growing concern in all over the world. In this study, the minimum quantity cooling lubrication (MQCL) technique, which uses very small amount of cutting oil, is motivated to apply to the hard milling process of Hardox 500 steel. Further, rice bran oil, a natural biodegradable oil, is used as the base fluid of Al2O3/MoS2 hybrid nanofluid. ANOVA analysis is used to study the influences of nanoparticle concentration, cutting speed, and feed rate on surface roughness. The obtained results indicate that good surface quality is achieved and the cutting speed is significantly increased to 140 m/min (about 2.55–2.80 times higher than the recommended values) due to the better cooling and lubricating effects from MQCL system and Al2O3/MoS2 hybrid nanofluid. Moreover, the microstructure of the machined surface proves the formation of MoS2 tribo film by using Al2O3/MoS2 hybrid nanofluid, indicating that the effectiveness of each type of nanoparticle in hybrid nanofluid has been promoted. Furthermore, the important technical guides for machining Hardox 500 steel are provided.

4 November 2021 in Fluids
Verified
Journal Article
Open access
PDF file
TNTuan Minh Ngo
Tuan Minh Ngo
TNTran Bao Ngoc
Tran Bao Ngoc
TTTran Le Thu
Tran Le Thu
Tran The LongTran The Long
Tran The Long
Minimum quantity lubrication (MQL) has gained significant attention in various research fields and industrial applications for its advantages of being environmentally friendly and suitable for sustainable production. The effectiveness of MQL is increasing significantly by using nano cutting fluid, which can be produced by suspending nanoparticles in the based cutting fluid. This study aims to investigate the effects of MoS2 nanoparticle concentration, cutting speed, and feed rate on MQL hard turning of 90CrSi steel in terms of surface roughness and surface microstructure. The Box–Behnken experimental design was used to analyze the influence of input parameters and their interaction effects as well as to find the optimal set of variables. The obtained results prove the improvement of the machinability of carbide tools due to higher cooling and lubricating performance created by MoS2 nanofluid MQL, which contributes to improve the surface quality and reduce the manufacturing cost. There is an interaction effect between nanoparticle concentration and feed rate which has a strong influence on surface roughness.

5 June 2020 in Lubricants
Verified
Journal Article
Open access
PDF file
PDPham Quang Dong
Pham Quang Dong
DMDuc Tran Minh
Duc Tran Minh
TNTuan Minh Ngo
Tuan Minh Ngo
Tran The LongTran The Long
Tran The Long
DTDang Van Thanh
Dang Van Thanh
NTNguyen Van Truong
Nguyen Van Truong
The present work shows the process for MoS2 nanosheet production by liquid N2-queched bulk, a novel method having highly efficient, green, and facile operation. The produced MoS2 nanoparticles are suspended in minimum quantity cooling lubrication (MQCL)-based fluid to form nanofluid used for the hard milling of AISI D2 steel. The study aims to improve the hard-milling performance assisted by the MQCL technique using MoS2 nanofluid. ANOVA analysis is used to evaluate the effects of three input machining variables, including nanoparticle concentration, cutting speed, and material hardness on cutting forces. The results indicate that the better cooling effect from the principle of the Ranque–Hilsch vortex tube of the MQCL device combined with the better lubricating performance from MoS2 nanofluid brings out the sustainable alternative solution for machining difficult-to-cut material. Moreover, the experimental results provide the technical guides for the selection of proper values of nanoparticle concentration and cutting speed while ensuring the technological, economic, and environmental characteristics.