Vu Lai Hoang

Dr. Vu Lai Hoang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
TNTran Bao Ngoc
Tran Bao Ngoc
DMDuc Tran Minh
Duc Tran Minh
TNTuan Minh Ngo
Tuan Minh Ngo
VHVu Lai Hoang
Vu Lai Hoang
Tran The LongTran The Long
Tran The Long
Friction and very high temperature are still the major challenges in hard machining technology and they greatly affect cutting efficiency. The application of the MQL (minimum quantity lubrication) method, using nanoparticles in order to improve the cooling lubrication performance of the base cutting oil, has proven to be a promising solution. Hence, this work aimed to investigate the effectiveness of Al2O3/MoS2 hybrid nanofluid and Al2O3 and MoS2 mono nanofluids in the hard turning of 90CrSi steel (60–62 HRC) under an MQL environment. The Box-Behnken experimental design was used for three input variables, including nanoparticle concentration, air pressure, and air flow rate. Their influences on surface roughness and cutting forces were studied. According to the obtained results, it was shown that the application of hybrid nano cutting oils in MQL contributes to achieving better hard machining performance than the use of mono nanofluids. In particular, a lower cutting temperature is reported and the values of surface roughness Ra, back force Fp, and cutting force Fc were smaller and more stable under Al2O3/MoS2 hybrid nanofluid MQL than those under Al2O3 and MoS2 mono nanofluid MQL due to an improvement in cooling lubrication characteristics. Thus, this work provides a novel approach to study hybrid nanofluids for MQL hard machining.

19 April 2022 in Fluids
Verified
Journal Article
Open access
PDF file
TNTuan Minh Ngo
Tuan Minh Ngo
DMDuc Tran Minh
Duc Tran Minh
Tran The LongTran The Long
Tran The Long
VHVu Lai Hoang
Vu Lai Hoang
TNTran Bao Ngoc
Tran Bao Ngoc
Cutting fluids used in the metal machining industry have exerted serious impacts on the environment and human health. In addition, the very high cutting heat and forces in machining-hardened steels have been a growing concern in the metal cutting field. Hence, new, eco-friendly cooling and lubricating techniques are necessary to study and develop. Minimum quantity lubrication (MQL) and minimum quantity cooling lubrication (MQCL) using nano cutting fluids have been proven as alternative solutions for machining difficult-to cut materials while retaining an environmentally friendly characteristic. Accordingly, this paper aims to analyze and evaluate the hard turning efficiency of 90CrSi (60 ÷ 62 HRC) steel using MQL and MQCL conditions, using Al2O3 and MoS2 nano cutting fluids. The 2k-p experimental design and analysis of variance (ANOVA) were used to study the influence of input parameters including fluid type, lubrication method, nanoparticle type, nanoparticle concentration, cutting speed and feed rate on surface roughness. The obtained results showed that the machinability of CNMG120404 TM T9125 carbide tools was improved and the highest machinable hardness was increased from 35 HRC to 60 ÷ 62 HRC (rising by approximately 71.4 ÷ 77.1%) by using the nanofluid MQL and MQCL methods. Furthermore, MQCL gives better performance than MQL, and the Al2O3 nanofluid exhibits the better result in terms of surface roughness values than the MoS2 nanofluid. Feed rate displays the strongest influence on surface roughness, while fluid type, nanoparticle concentration and cutting speed show low impacts. From these results, technical guidance will be provided for further studies using Al2O3 and MoS2 nano cutting fluids for MQL and MQCL methods, as well as their application in machining practice.

19 May 2026 in Fluids
Verified
Journal Article
Open access
PDF file
DNDoan Minh Nguyen
Doan Minh Nguyen
TNTuan Minh Ngo
Tuan Minh Ngo
VHVu Lai Hoang
Vu Lai Hoang
Tran The LongTran The Long
Tran The Long
This paper presents a study on evaluating the effectiveness of nanofluid Minimum Quantity Lubrication (NF MQL) in machining Hastelloy C276 alloy—a difficult-to-cut material. The study compares NF MQL using different types of nanoparticles (Al2O3, MoS2, SiC, and GrP) with dry and pure MQL conditions in terms of surface roughness, cutting force components, and especially the variation of cutting forces over time. Experimental results indicate that the graphene-containing nanofluid MQL showed the most superior performance in terms of surface roughness Ra with 54.3% and 34% reduction, followed by MoS2 and Al2O3 nanofluid MQL conditions. Regarding the active cutting force Fa, Al2O3 nanofluid MQL achieves the largest reduction of about 18.4% and 22.1% when compared to dry and pure MQL, followed by GrP nanofluid MQL, MoS2 nanofluid MQL, and then SiC nanofluid MQL. Meanwhile, GrP nanofluid MQL shows the highest percentage of Fz reduction at about 13.4% and 26% when compared to the dry and pure MQL conditions, followed by MoS2 nanofluid MQL. Furthermore, the application of NF MQL also significantly improves tool life and extends about 36.4 ÷ 61.1% and 18.2 ÷ 50% compared to dry and pure MQL, respectively. Notably, through in-depth analysis of the variation of cutting forces, the study has elucidated the superior lubrication and cooling mechanism of the NF MQL method, confirming its potential application in machining advanced materials.

3 November 2026
Verified
Book Chapter
Open access
PDF file
NTNguyen Van Truong
Nguyen Van Truong
PTPham Minh Tan
Pham Minh Tan
VHVu Lai Hoang
Vu Lai Hoang
DLDong Thi Linh
Dong Thi Linh
Nanoemulsion-based lubricants enriched with two-dimensional (2D) nanomaterials represent a distinct direction in advanced tribology, where interfacial engineering and colloidal design are combined to improve lubrication efficiency. In these systems, ultrathin solids such as graphene, MoS2, WS2, or h-BN act as active agents that modify the sliding interface by creating protective layers, facilitating low-shear motion, and dissipating mechanical energy during contact. The nanoemulsion medium, characterized by its fine droplet size and high kinetic stability, enables uniform distribution and continuous delivery of nanosheets to the frictional zone. This cooperative interaction between the dispersed droplets and the 2D material surfaces yields reduced wear, enhanced load-bearing capacity, and greater operational consistency compared with conventional oils. As a result, this hybrid lubrication strategy provides a scalable and environmentally aligned route for next-generation manufacturing processes.

17 November 2025 in TNU Journal of Science and Technology
Verified
Journal Article
Closed access
PDF file
VHVu Lai Hoang
Vu Lai Hoang
Trong nghiên cứu này, hợp kim cứng TT10K8 được chế tạo bằng phương pháp luyện kim bột. Mặt khác, bột cacbit tatan (TaC) được tổng hợp bằng phương pháp hoàn nguyên, cacbit hóa đồng thời ôxít tantan (Ta2O5) bằng cacbon và hàmlượngcacbon đạt được 5,98÷6,02% được sử dụng chế tạo hợp kim cứng TT10K8. Sự ảnh hưởng của nhiệt độ thiêu kết đến tỷ trọng, độ cứng và độ bền uốn đã được nghiên cứu qua các phép đo tương ứng. Sau khi thiêu kết ở nhiệt độ 1460 oC hợp kim cứng nhận được có tỷ trọng ≈ 13,15 g/cm3, độ cứng ≈ 91,5 HRA và độ bền uốn ≈ 1570 MPa. Kết quả nhận được cho thấy hợp kim TT10K8 do nghiêncứu chế tạo được về cơ bản đáp ứng yêu cầu làm dụng cụ cắt gọt kim loại. Để đánh giá khả năng gia công cắt gọt của hợp kim cứng TT10K8 của nghiên cứu với hợp kim cứng TT10K8-ZCC sẵn có trên thị trường, thực hiện gia công thử nghiệm đối với thép kết cấu C45 qua nhiệt luyện có độ cứng khoảng 62 HRC để xác định tuổi bền của dụng cụ, cho thấy lượng mòn mặt trước và mặt sau của dụng cụ đã được cải thiện 11,6% và 5% tương ứng.