Viktoriia Krukovska

Dr. Viktoriia Krukovska

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
Oleksandr KrukovskyiOleksandr Krukovskyi
Oleksandr Krukovskyi
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
SSSerhii Skipochka
Serhii Skipochka
Purpose is to analyze changes in shape and dimensions of a rock mass area, fortified with the help of a polymer, depending upon the density of injection rock bolts as well as the value of initial permeability of enclosing rocks to substantiate optimum process solutions to support roofs within the unstable rocks and protect mine workings against water inflow and gas emission. Methods. Numerical modeling method for coupled processes of rock mass strain and filtration of liquid components of a polymer has been applied. The model is based upon fundamental ideas of mechanics of solids and filtration theory. The problem has been solved using a finite element method. Its solution took into consideration both the initial permeability and the permeability stipulated by mine working driving, injection time of reagents and their polymerization, and effect of po-lymer foaming in the process of mixing of its components. Changes in physicomechanical and filtration characteristics of rock mass during polymer hardening were simulated. It has been taken into consideration that a metal delivery pipe starts operating as a reinforcing support element only after the polymer hardening. Findings. If three and five injection rock bolts are installed within a mine working section then stresses, permeability coefficients, pressure of liquid polymeric composition, and geometry of the fortified area of rock mass have been calculated. It has been shown that rock bolt location is quite important to form a rock-bolt arch. It has been demonstrated for the assumed conditions that if five injection rock bolts are installed within the mine working roof then close interaction between rock-bolt supports takes place; moreover, the integral arch is formed within the mine working roof. Originality. Dependence of change in the polymer reinforced area upon a value of initial permeability of enclosing rocks has been derived. It has been shown that in terms of low values of initial permeability, geometry of rock-bolt supports as well as its size is identified only by means of a value of the unloaded zone around the mine working. In this context, initial permeabi-lity increase results in the enlarged diameter of the reinforced rock mass area in the neighbourhood of the injection rock bolt. Practical implications. The findings are recommended to be applied while improving a method to support the mine working roof and decrease water inflow as well as gas emission from the rocks, being undermined, into the working.

9 July 2019 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
Oleksandr KrukovskyiOleksandr Krukovskyi
Oleksandr Krukovskyi
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
The mathematical model has been developed for the coupled processes of the rock massif deformation and gas filtration in a disturbed area around mine working, in the bottom of which there are hard and soft gas-bearing rocks. When solving the problem, the finite element method was used. The calculation results of the displacements, stresses and pressures of methane in the studied area are represented in the paper. It is shown that the difference in the physical and mechanical properties of the bottom rocks of mine working causes the non-uniform distribution of geomechanics and filtration parameters. In more strong sandstone, the stresses concentration increases. Therewith, an intensive process of fractures formation takes place in the argillite and the coal. Methane from the upper part of the gas-bearing sandstone is filtered into the mine working, the destruction of the coal interlayer is accompanied by release of methane and its accumulation under the layer of a strong sandstone. The development of a zone of inelastic deformations leads to the destruction of sandstone. In case of brittle destruction, with the formation of fractures of a certain length, a breakthrough of methane may occur out of the bottom into mine working.

30 June 2017 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
IUInstitute of Geotechnical Mechanics named after M.S. Polyakov of the National Academy of Sciences of Ukraine
Institute of Geotechnical Mechanics named after M.S. Polyakov of the National Academy of Sciences of Ukraine
Oleksandr KrukovskyiOleksandr Krukovskyi
Oleksandr Krukovskyi
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
YVYu Vynohradov
Yu Vynohradov
IUInstitute for Physics of Mining Processes of the National Academy of Sciences of Ukraine
Institute for Physics of Mining Processes of the National Academy of Sciences of Ukraine

30 June 2024 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
Oleksandr KrukovskyiOleksandr Krukovskyi
Oleksandr Krukovskyi
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
YBYurii Bulich
Yurii Bulich
SDSerhii Demchenko
Serhii Demchenko
IKIryna Konstantynova
Iryna Konstantynova
Purpose is to study the influence of mining and geological conditions on the time-dependent stability of the collective refuge chamber for mine workers with the adjacent mine workings and develop support schemes for different conditions of construction of such mine workings. Methods. Numerical modelling methods of the connected processes of elastoplastic deformation of gas-bearing rocks and gas filtration within the area disturbed during mining operations were used to study stability of mine workings with a compound cross-section, i.e. the collective refuge chambers and its adjacent extraction gallery. The model was based on fundamental principles of solid mechanics and filtration theory. The problem was solved using a finite element method. Findings. A classification of the conditions for locating collective refuge chambers for mine workers according to the relative strength of the enclosing rocks was developed. Support schemes for the chamber and its adjacent mine working were elaborated. The schemes include basic support and provide for its strengthening with rock bolts located in the roof of the mine working and chamber, or in their walls. The compliance of these support schemes with the developed classification of location conditions was determined. A numerical study of the time-dependent stability of the chamber and its adjacent mine working, while applying the recommended support scheme, was performed. It is shown that the strengthening of rock bolting schemes reduces the multicomponent stress field and the area of the zone of inelastic deformations, forms a rock-bolt overlap in the roof of the mine workings and chambers, which helps increase their stability under the complicated mining and geological conditions. Originality. Dependence of the changes within the area of a zone of inelastic deformations around the chamber with its adjacent mine working on the relative strength of the enclosing rocks was identified; time-dependent changes within the area of the zone of inelastic deformations, when using different support types, were specified. Practical implications. Support schemes for collective rescue chambers for mine workers in terms of different construction conditions were developed along with the procedure of their selection for specific mining and geological conditions. The results of the study provide theoretical substantiation and scientific guidelines for the selection of supports for collective refuge chambers adjacent to the mine working.

30 June 2021 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
OKOleksandr Krukovskyi
Oleksandr Krukovskyi
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
YVYurii Vynohradov
Yurii Vynohradov
VDVladimir Dyomin
Vladimir Dyomin
In this work, the problem of water inflow reduction in Ukrainian coal mines, which are distinguished by difficult hydrogeological conditions, was considered. A numerical study of the change in water inflow into a mine working when it crosses a tectonic fault was carried out. The cases when the permanent working was supported by frame supports and roof bolts were considered. The calculation of stress fields, zones with inelastic deformations and coefficients of permeability, which depend on the stress state and takes into account tectonic and natural permeability of the rocks, was performed. The results of calculating the water pressure and water inflow into the mine working in all considered cases are presented in the article. Analysis of the calculated data showed that a disturbed area, which covered water-bearing ricks, was formed in the roof of the mine working with the frame support. Within this area, water can move towards the contour of the mine working. The filtration permeability of the host rocks increases significantly when the mine face approaches the tectonic disturbance. The flow rate of water reaches critical values. The use of roof bolting restrains the unloading of the boundary rocks from the rock pressure and keeps them in a triaxially compressed stress state. The permeability value decreases by the value of its technological component. In different areas of the intersection of tectonic disturbance, the water inflow into the mine working with roof bolting is 3-8 times less than in the working, supported by frame supports. Therefore, the use of roof bolting allows not only to keep the mine working in a stable state, but also to significantly reduce water inflows at complicated hydrogeological conditions.

9 July 2019 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
Viktoriia KrukovskaViktoriia Krukovska
Viktoriia Krukovska
YVYurii Vynohradov
Yurii Vynohradov
The water stability influence of host rocks on water filtration process from the undermined aquifer to the mine working, depending on the way of its fastening has been studied in the paper. When solving the problem of water filtration in a deformable massif, the finite element method was used. The results of calculations are presented of the filtration permeability of the coal-bearing massif, the water pressure and the value of the water inflow into mine working in the cases of mining operations in sandstone and argillite. It is shown that the use of roof-bolting support prevents the development of the fractures formation process in the mine working roof, preserving the rocks in a natural, monolithic state. As a result, the process of water filtration from water bearing rock layers is constrained, which prevents or significantly reduces the soaking of border roof rocks. The use of roof-bolting fastening several times reduces the water inflow into mine working, located even in water-permeable rocks. The application of the roof-bolting support as a technological method for reducing the water inflow into mine workings has been substantiated.