30 June 2024 in Mining of Mineral Deposits
Purpose is to study the influence of mining and geological conditions on the time-dependent stability of the collective refuge chamber for mine workers with the adjacent mine workings and develop support schemes for different conditions of construction of such mine workings. Methods. Numerical modelling methods of the connected processes of elastoplastic deformation of gas-bearing rocks and gas filtration within the area disturbed during mining operations were used to study stability of mine workings with a compound cross-section, i.e. the collective refuge chambers and its adjacent extraction gallery. The model was based on fundamental principles of solid mechanics and filtration theory. The problem was solved using a finite element method. Findings. A classification of the conditions for locating collective refuge chambers for mine workers according to the relative strength of the enclosing rocks was developed. Support schemes for the chamber and its adjacent mine working were elaborated. The schemes include basic support and provide for its strengthening with rock bolts located in the roof of the mine working and chamber, or in their walls. The compliance of these support schemes with the developed classification of location conditions was determined. A numerical study of the time-dependent stability of the chamber and its adjacent mine working, while applying the recommended support scheme, was performed. It is shown that the strengthening of rock bolting schemes reduces the multicomponent stress field and the area of the zone of inelastic deformations, forms a rock-bolt overlap in the roof of the mine workings and chambers, which helps increase their stability under the complicated mining and geological conditions. Originality. Dependence of the changes within the area of a zone of inelastic deformations around the chamber with its adjacent mine working on the relative strength of the enclosing rocks was identified; time-dependent changes within the area of the zone of inelastic deformations, when using different support types, were specified. Practical implications. Support schemes for collective rescue chambers for mine workers in terms of different construction conditions were developed along with the procedure of their selection for specific mining and geological conditions. The results of the study provide theoretical substantiation and scientific guidelines for the selection of supports for collective refuge chambers adjacent to the mine working.
1 January 2023 in Geo-Technical Mechanics
MUM.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine
Shelters in coal mines are used to protect miners during accidents associated with gassing of roadways, fires, explosions of methane-air mixture. Supporting of the shelter must provide the necessary level of tightness to prevent the penetration of noxious gases from the mine atmosphere or gas-bearing rocks. The purpose of this work is to study the possibility of noxious gases penetration into a shelter in case of its sealing failure for the early detection of weak constructional elements and to ensure safe conditions for people in the shelter during accidents. To achieve the goal, methods of numerical simulation of time-dependent processes of elastic-plastic deformation and gas filtration were used. A coal-rock mass with a roadway and an adjacent shelter with typical supporting elements were considered at a depth of 400 m and 1000 m. The study of the stress state of the shelter support showed that under the considered conditions, in the case of a relatively small depth, hard steel and concrete constructional elements withstand the load without loss of their stability. With an increase in the depth of the shelter location, inelastic deformation of the concrete barrier between the shelter and the roadway occurs on a small area. The probable destruction of this zone will not lead to a violation of the entire barrier integrity, which makes it impossible to start mass exchange processes between clean air in the shelter and harmful combustion products in the roadway. The roof and walls of the shelter, covered with reinforced concrete and sealed, remain practically impermeable from the next day after their construction in both the first and second cases. But later, in the lower left corner of the shelter at a depth of 1000 m, methane from the coal seam begins infiltrating through the unsupported and unsealed floor. The developed numerical model can be used with other basic data on mining and geological conditions to identify constructional elements of a shelter, which lose stability during operation and threaten the shelter's tightness. Timely strengthening of such weak elements will prevent the danger of noxious gases infiltrating into the shelter. Keywords: time-dependent rock deformation, shelter, sealing failure, gas filtration, numerical simulation.