Due to semiconductor technology scaling, integrated circuits have become more sensitive to soft errors. To effectively tolerate multi-node-upsets caused by soft errors and reduce the power dissipation and delay of a latch, this paper proposes a novel triple-node-upset (TNU) self-recoverable latch design, namely, a highly robust TNU self-recoverable (HTNURE) latch, with many redundant nodes and cyclic storage based on 32-nm CMOS technology. The proposed latch uses the Muller C-element as a basic module and can recover all nodes after a TNU occurs. It has low power dissipation and delay due to the application of clock gating technology and high-speed transmission path technology. The proposed latch design was verified by simulations, and simulation results validate its advantages of low power and delay, and high robustness. In addition, compared with the state-of-the-art TNU-tolerant latches, the proposed latch reduces power dissipation, transmission delay, and power-delay-product by approximately 52%, 25%, and 34%, respectively, with a roughly 17% increase in the number of transistors. Furthermore, the proposed latch is the most cost-effective compared with the TNU-self-recoverable latches, and has less or equivalent sensitivity to the process, voltage, and temperature variation compared with the reference latches.
1 October 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Soft errors have been a severe threat to the reliability of modern integrated circuits (ICs), making hardened latch designs indispensable for masking soft errors with redundancy. However, the added redundancy also masks production defects as soft errors; this makes it hard to detect defects in hardened latches, thus significantly reducing their reliability. Our previous work proposed the scan-test-aware hardened latch (STAHL) design, the first for addressing the issue of low defect detectability of hardened latch designs. However, STAHL still suffers from two problems: 1) it is not self-resilient to soft errors and 2) a STAHL-based scan design requires one additional control signal. This article proposes a high defect detectable and single-event-upset (SEU)-resilient robust (HIDER) latch to address the issues of the low defect detectability of existing hardened latches and the STAHLs lack of SEU-resilient capability. Two scan designs [HIDER-based scan-cell-S (HIDER-SC-S) and HIDER-based scan-cell-F (HIDER-SC-F)], as well as two corresponding test procedures, are proposed to fully test HIDER latch with only one control signal. Simulation results show that the HIDER latch achieves the highest defect coverage (DC) in both single latch cell detection and scan tests among all existing hardened latch designs. In addition, the HIDER latch has much lower power and a smaller delay than STAHL.
1 January 2024 in Journal of Micro/Nanopatterning, Materials, and Metrology
Lithography hotspot (LHS) detection is crucial for achieving manufacturability design in integrated circuits (ICs) and ensuring the final yield of ICs chips. Recognizing the challenges posed by conventional deep learning-based methods for lithographic hotspot detection in meeting the demands of advanced IC manufacturing accuracy, this study introduces an LHS detection approach. This approach leverages multi-scale feature fusion to identify defects in lithographic layout hotspots accurately. This method incorporates the convolutional block attention module into the backbone network to enhance the focus of the model on the layout area. Additionally, a feature pyramid is employed to merge deep and shallow features from the layout pattern, significantly enhancing the capability of hotspot detection network to extract both image and semantic features. Concurrently, by utilizing a dense block that directly interconnects various layers, the network gains the capacity to capture the correlation between low-level and high-level features, thereby enhancing the perceptual capabilities of the model. Experimental results demonstrate the superiority of the algorithm across accuracy, false alarm, F1 score, and overall detection simulation time compared to alternative lithographic hotspot detection algorithms.
10 April 2024 in IEEE Transactions on Device and Materials Reliability
With the aggressive scaling in the feature size of transistors, single-event triple-node-upsets (TNUs) induced by charge sharing in CMOS circuits have become a significant reliability problem. In this paper, based on N-type stacked transistors, a TNU self-recovery latch called LORD-TNU is proposed. Utilizing the stacked transistors to reduce the count of sensitive nodes in the latch. In addition, we use three modules to protect each other. In the event of a soft error in one module, the remaining modules can restore the corrupted module. This design not only saves delay overhead but also minimizes area overhead. Simulation results show that compared with the four typical TNU hardened latches, the proposed LORD-TNU latch reduces area overhead by 49.76%, power consumption by 56.07%, delay by 40.17%, and the power-delay-product (PDP) by 72.56% on average, respectively. Moreover, the robustness of our LORD-TNU latch is confirmed by comprehensive PVT (Process, Voltage, Temperature) and Monte Carlo simulations, demonstrating its stability across a range of process corners, supply voltage, and temperature variations.
To avoid soft errors in integrated circuits, this paper presents two high-performance latch designs, namely LOCDNUTRL and LOCTNUTRL, protecting against double-node upset (DNU) and triple-node upset (TNU) in the harsh radiation environment. First, the LOCDNUTRL latch consists of two single-node upset (SNU) self-recovery modules and uses a C-element at the output. Next, based on the LOCDNUTRL latch, the LOCTNUTRL latch is proposed, which uses five extra inverters to fully tolerate TNU. Unlike the LOCDNUTRL latch, which uses an output level C-element as a voter, LOCTNUTRL is insensitive to the high-impedance state (HIS), making it more reliable for aerospace applications. The HSPICE simulation results, using a predictive technology model, show that the LOCTNUTRL latch saves 57.74% delay, 7.7% power consumption, 11.74% area cost, and 63.59% power delay production (PDP) on average compared with the state-of-the-art hardened latches. The process, voltage, and temperature variation analysis show that the proposed two latches are less sensitive to changes.
31 December 2022 in Journal of Circuits, Systems and Computers