1 October 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Soft errors have been a severe threat to the reliability of modern integrated circuits (ICs), making hardened latch designs indispensable for masking soft errors with redundancy. However, the added redundancy also masks production defects as soft errors; this makes it hard to detect defects in hardened latches, thus significantly reducing their reliability. Our previous work proposed the scan-test-aware hardened latch (STAHL) design, the first for addressing the issue of low defect detectability of hardened latch designs. However, STAHL still suffers from two problems: 1) it is not self-resilient to soft errors and 2) a STAHL-based scan design requires one additional control signal. This article proposes a high defect detectable and single-event-upset (SEU)-resilient robust (HIDER) latch to address the issues of the low defect detectability of existing hardened latches and the STAHLs lack of SEU-resilient capability. Two scan designs [HIDER-based scan-cell-S (HIDER-SC-S) and HIDER-based scan-cell-F (HIDER-SC-F)], as well as two corresponding test procedures, are proposed to fully test HIDER latch with only one control signal. Simulation results show that the HIDER latch achieves the highest defect coverage (DC) in both single latch cell detection and scan tests among all existing hardened latch designs. In addition, the HIDER latch has much lower power and a smaller delay than STAHL.
10 April 2024 in IEEE Transactions on Device and Materials Reliability
With the aggressive scaling in the feature size of transistors, single-event triple-node-upsets (TNUs) induced by charge sharing in CMOS circuits have become a significant reliability problem. In this paper, based on N-type stacked transistors, a TNU self-recovery latch called LORD-TNU is proposed. Utilizing the stacked transistors to reduce the count of sensitive nodes in the latch. In addition, we use three modules to protect each other. In the event of a soft error in one module, the remaining modules can restore the corrupted module. This design not only saves delay overhead but also minimizes area overhead. Simulation results show that compared with the four typical TNU hardened latches, the proposed LORD-TNU latch reduces area overhead by 49.76%, power consumption by 56.07%, delay by 40.17%, and the power-delay-product (PDP) by 72.56% on average, respectively. Moreover, the robustness of our LORD-TNU latch is confirmed by comprehensive PVT (Process, Voltage, Temperature) and Monte Carlo simulations, demonstrating its stability across a range of process corners, supply voltage, and temperature variations.