Yandi Anibal Gallego Landera

Dr. Yandi Anibal Gallego Landera

Departamento de Ingeniería Eléctrica y Electrónica, Universidad del Bio Bio, Concepción, Biobío, Chile
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2023 in Energies
Verified
Journal Article
Open access
PDF file
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
OZOscar Cuaresma Zevallos
Oscar Cuaresma Zevallos
Rafael NetoRafael Neto
Rafael Neto
JCJose Filho Costa Castro
Jose Filho Costa Castro
Francisco NevesFrancisco Neves
Francisco Neves
The increasing rate of renewable energy penetration in modern power grids has prompted updates to the regulations, standards, and grid codes requiring ancillary services provided by photovoltaic-generating units similar to those applied to conventional generating units. In this work, a comprehensive survey presents a comparison of requirements related to voltage ride through reactive current injection/absorption; active power restoration; frequency stability regulation and active power control; voltage regulation and reactive power control; and the energy quality requisites included in the standards and grid codes of countries around the globe. The survey can be used to observe the differences between the requirements established in the grid codes depending on the power system operating characteristics, development of technology, and renewable energy penetration level. Many of these factors determine the parameters used to establish requisites for different grid codes, making a global standardization of the renewable energy interconnection requirements much harder.

11 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
JCJuan Moreno Castro
Juan Moreno Castro
VOVíctor S Ocaña-Guevara
Víctor S Ocaña-Guevara
LVLesyani Teresa León Viltre
Lesyani Teresa León Viltre
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
OZOscar Cuaresma Zevallos
Oscar Cuaresma Zevallos
Miguel Euclides MejíaMiguel Euclides Mejía
Miguel Euclides Mejía
In recent years, microgrid (MG) deployment has significantly increased, utilizing various technologies. MGs are essential for integrating distributed generation into electric power systems. These systems’ economic dispatch (ED) aims to minimize generation costs within a specific time interval while meeting power generation constraints. By employing ED in electric MGs, the utilization of distributed energy resources becomes more flexible, enhancing energy system efficiency. Additionally, it enables the anticipation and proper utilization of operational limitations and encourages the active involvement of prosumers in the electricity market. However, implementing controllers and algorithms for optimizing ED requires the independent handling of constraints. Numerous algorithms and solutions have been proposed for the ED of MGs. These contributions suggest utilizing techniques such as particle swarm optimization (PSO), mixed-integer linear programming (MILP), CPLEX, and MATLAB. This paper presents an investigation of the use of model predictive control (MPC) as an optimal management tool for MGs. MPC has proven effective in ED by allowing the prediction of environmental or dynamic models within the system. This study aims to review MGs’ management strategies, specifically focusing on MPC techniques. It analyzes how MPC has been applied to optimize ED while considering MGs’ unique characteristics and requirements. This review aims to enhance the understanding of MPC’s role in efficient MG management, guiding future research and applications in this field.

22 April 2022 in IEEE Access
Verified
Journal Article
Open access
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
OZOscar Cuaresma Zevallos
Oscar Cuaresma Zevallos
Francisco NevesFrancisco Neves
Francisco Neves
Rafael NetoRafael Neto
Rafael Neto
RPRicardo B. Prada
Ricardo B. Prada
The goal of achieving decarbonized operation of power systems in response to climate change has led to an increase in the number of sources connected to electrical grids through inverters, of which photovoltaic systems are an example. The operating characteristics of these systems in steady-state or transient operation are different from those of synchronous machines, giving rise to issues related to power system stability. The vast majority of grid codes stipulate that fault ride-through operating requirements should be enabled during severe contingencies in the transmission network, prioritizing delivery of reactive power to the power system to support voltage stability. However, this control action may contribute to rapid collapse of the system voltage under adverse operating conditions, such as when the critical voltage in the power vs. voltage curve is near the reliable voltage operating bound. Supporting power system stability under these circumstances represents a new challenge for inverter control schemes. This paper adapts a recently published fault ride-through control scheme for PV inverters for use in a multimachine power system and shows that the scheme can successfully maintain transient and voltage stability even under adverse voltage operating conditions.

25 October 2025 in Energies
Verified
Journal Article
Open access
PDF file
DLDavid Lara Leon
David Lara Leon
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
LGLuis Garcia-Santander
Luis Garcia-Santander
LVLesyani Teresa León Viltre
Lesyani Teresa León Viltre
OZOscar Cuaresma Zevallos
Oscar Cuaresma Zevallos
FJFredy Antonio Muñoz Jarpa
Fredy Antonio Muñoz Jarpa
Currently, the global use of electric vehicles is still low; however, a significant increase is expected in the coming years. Determining the optimal location of charging stations in distribution systems can influence the increased adoption of this technology in transportation, as it contributes to the proper functioning of distribution networks. There are several optimization methods, which can be classified into exact, heuristic, and metaheuristic methods, each with different characteristics and applications. This article presents a literature review of the main optimization methods currently used to determine the location of charging stations in distribution systems. It concludes that metaheuristic optimization methods are the most widely used. In addition, the review identifies current research gaps, particularly the limited use of real EV demand data and the lack of stochastic approaches to represent demand variability. The main contribution of this work lies in emphasizing the importance of incorporating stochastic methods to adequately address the uncertainty of EV demand in distribution networks.

25 February 2021 in Energies
Verified
Journal Article
Open access
PDF file
Rafael NetoRafael Neto
Rafael Neto
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
Francisco NevesFrancisco Neves
Francisco Neves
HSHelber de Souza
Helber de Souza
Marcelo CavalcantiMarcelo Cavalcanti
Marcelo Cavalcanti
Gustavo Medeiros de Souza AzevedoGustavo Medeiros de Souza Azevedo
Gustavo Medeiros de Souza Azevedo
Voltage sags/swells and harmonics are recurring problems in electric energy distribution systems. In order to solve these issues, several dynamic voltage restorer (DVR) topologies, such as the conventional three-wire DVR, have been proposed in the literature. Despite its capability of mitigating voltage disturbances, many researchers have established that conventional three-wire DVR cannot compensate for zero sequence voltage disturbances. In this paper, an in-depth study of the conventional three-phase DVR is presented, which shows that this DVR topology can also be used to attenuate zero sequence voltage components without increasing control complexity. The necessary conditions for this to occur are discussed in details and a brief comparison between the conventional three-wire DVR and other DVR topologies that can compensate for zero sequence voltage disturbances is made. Experimental results are included to validate the theoretical study.

21 June 2024 in Sensors
Verified
Journal Article
Open access
PDF file
MAMiguel Albornoz
Miguel Albornoz
Jaime RohtenJaime Rohten
Jaime Rohten
Jose EspinozaJose Espinoza
Jose Espinoza
JVJorge Varela
Jorge Varela
DSDaniel Sbarbaro
Daniel Sbarbaro
Yandi Anibal Gallego LanderaYandi Anibal Gallego Landera
Yandi Anibal Gallego Landera
The increasing participation of photovoltaic sources in power grids presents the challenge of enhancing power quality, which is affected by the intrinsic characteristics of these sources, such as variability and lack of inertia. This power quality degradation mainly generates variations in both voltage magnitude and frequency, which are more pronounced in microgrids. In fact, the magnitude problem is particularly present in the distribution systems, where photovoltaic sources are spread along the grid. Due to the power converter’s lack of inertia, frequency problems can be seen throughout the network. Grid-forming control strategies in photovoltaic systems have been proposed to address these problems, although most proposed solutions involve either a direct voltage source or energy storage systems, thereby increasing costs. In this paper, a photovoltaic injection system is designed with a virtual synchronous machine control strategy to provide voltage and frequency support to the grid. The maximum power point tracking algorithm is adapted to provide the direct voltage reference and inject active power according to the droop frequency control. The control strategy is validated through simulations and key experimental setup tests. The results demonstrate that it is possible to inject photovoltaic power and provide voltage and frequency support.