In some photovoltaic (PV) applications, it is possible to remove the transformer of a system in order to reduce losses, cost, and size. In transformerless systems, the PV module parasitic capacitance can introduce leakage currents in which the amplitude depends on the converter topology, on the pulsewidth modulation, and on the resonant circuit comprised by the system components. Based on the common-mode voltage model, modulation techniques are proposed to eliminate the leakage current in transformerless PV systems without requiring any modification on the converter and any additional hardware. The main drawback is that the proposed modulation technique for two-level inverters can only be used with 650-V dc link in the case of a 110-V (rms) grid phase voltage. Comparisons among the modulation techniques are discussed, and it is proven that the proposed modulation for two- and three-level inverters presents the best results. To validate the models used in the simulations, an experimental three-phase inverter is used.

The main contribution of this paper is the proposal of new modulation techniques for three-phase transformerless neutral point clamped inverters to eliminate leakage currents in photovoltaic systems without requiring any modification on the multilevel inverter or any additional hardware. The modulation techniques are capable of reducing the leakage currents in photovoltaic systems by applying three medium vectors or using only two medium vectors and one specific zero vector to compose the reference vector. In addition, to increase the system utilization, the three-phase neutral point clamped inverter can be designed to also provide functions of active filter using the p - q theory. The proposed system provides maximum power point tracking and compensation of current harmonics and reactive power. To validate the simulation models, an experimental three-phase inverter is used to evaluate leakage currents and the dc link voltage control.

In this paper, a modified Z-source inverter (ZSI) with specific modulation techniques is proposed to reduce leakage currents in three-phase transformerless photovoltaic (PV) systems. The new topology only requires an additional fast-recovery diode when compared with the original structure. On the other hand, the pulsewidth modulation technique is entirely modified in order to reduce the leakage currents through the conduction path. Simulation results for the three-phase transformerless PV system operating in two cases, i.e., connected to a grid and connected to a grounded RL load, are presented. Experimental results of leakage currents in three-phase ZSIs connected to a RL load are obtained to validate the theoretical and simulation models.

A novel scheme for obtaining the fundamental-frequency positive-sequence grid voltage vector based on a generalization of the delayed signal cancellation method is proposed in this paper. The technique is implemented by sampling and storing the instantaneous αβ voltage vector. A mathematical transformation is then proposed through which the current and delayed voltage vectors are combined. It is shown that the proposed transformation has unity gain for the fundamental-frequency positive-sequence voltage vector, while its gain is equal to zero for some chosen components. Cascaded transformations can then be used for eliminating the fundamental-frequency negative-sequence vector, as well as chosen positive- and negative-sequence harmonic vector components and, thus, for accurately obtaining the fundamental-frequency positive-sequence voltage vector. The output of the last transformation block is input to a synchronous reference frame phase-locked loop for detecting frequency and position of the positive-sequence vector. A proposal for making the scheme frequency adaptive is also presented. The good performance of the proposed method is verified with simulations and experiments by using distorted and unbalanced signals, containing fundamental-frequency as well as positive- and negative-sequence harmonic components. The proposed method frequency adaptation capability is also verified.

Second order generalized integrators (SOGI) have been proposed to obtain zero steady-state error using stationary frames in grid-converters applied to active rectifiers, active filters, uninterruptible power supplies and distributed generation. These integrators have been also included in algorithms of grid synchronization, detection of sequences, harmonic compensation, etc. Due to all these algorithms are implemented over digital processors, it is very important to make a correct discretization to optimize their behaviour. This work is focused in this topic. An exhaustive study about different methods to implement the SOGIs in the discrete-time is achieved, proposing a common structure for the different SOGI applications, including proposals of C program and presenting a comparative analysis about the execution time using different digital structures.

In this paper, two methods for determining the fundamental frequency and harmonic positive- and negative-sequence components of three-phase signals are investigated. Many aspects of the space-vector discrete Fourier transform and generalized delayed signal cancellation (GDSC) such as response time for different possible implementations, frequency adaptation schemes, stability of recursive implementation, and rounding error effects are discussed. A new design procedure for GDSC transformations is presented. New indices for characterizing three-phase unbalanced and distorted signals are proposed. Simulations and experiments are included in order to verify the performances and illustrate the theoretical conclusions.