The size of wind turbine rotors is still rapidly increasing, though many technical challenges emerge. Novel rotor designs emerge to satisfy this up-scale trend, such as downwind load-aligned concepts, which orients the loads along the blade spanwise to greatly decrease the bending moments at the root. As the studies on the aerodynamics of these rotor concepts using 3D body-fitted mesh are very limited, this paper establishes different cone configurations based on the DTU 10 MW reference rotor and conducts a series of simulations. It is found that the cone angle and the distance from the blade section to the tip vortex are two deterministic factors on conning. Upwind rotors have larger power output, less thrust, smaller wake deficit, and smaller influencing area than downwind rotors of the same size, which provides superior aerodynamic priority and benefits wind farm design. The largest upwind cone angle of 14.03°, among the cases studied, leads to the highest torque to thrust ratio which is 3.63% higher than the baseline rotor. The downwind load-aligned rotor, designed to reduce the blade root bending moments at large wind speed, performs worse at the present simulation conditions than an upwind rotor of the same size.

Floating offshore wind turbines (FOWTs) exhibit complex motion with multiple degrees of freedom due to the interaction of wind and waves. The aerodynamic performance and wake characteristics of these turbines are highly intricate and challenging to accurately capture. In this study, dynamic fluid body interaction (DFBI) and overset grid technology are employed to investigate the dynamic motion of a 5 MW FOWT. We use the volume of fluid (VOF) method and improved delayed detached eddy simulation (IDDES) model to investigate the aerodynamic performance and wake evolution mechanism for various wave periods and heights. According to the findings, the magnitude of the pitch motion increases with the period and height of the waves, leading to a decrease in both the power output and thrust; the maximum power was reduced by nearly 6.8% compared to a wind turbine without motion. The value of power and thrust reduction varies for different wave periods and heights, and is influenced by the relative speed and pitch angle, which play a crucial role. Wind–wave coupling has a significant impact on the evolution of both wake and vortex structures for FOWT. The wake shape downstream is also dynamically influenced by the waves. In the presence of wind and wave coupling, the interaction between the wind turbine and the wake is heightened, leading to the merger of two unstable vortex rings into a single, larger vortex ring. The research unveils a comprehensive picture of the offshore wind energy dynamics and wake field, which holds immense significance for the design of floating wind turbines and the optimization of wind farm layout.

The current article describes the conceptual design of a rotor for a 5 MW machine situated at an offshore site in China (OffWindChina). The OffWindChina 5 MW rotor design work was divided into two parts between the Technical University of Denmark (DTU) and the Chong Qing University (CQU). The two parts consist of the aeroelastic and structural design phases. The aeroelastic part determines the optimal outer blade shape in terms of cost of energy (COE), while the structural part determines the internal laminate layup to achieve a minimum blade mass. Each part is performed sequentially using in-house optimization tools developed at DTU and CQU. The designed blade yields a high energy output while maintaining the structural feasibility with respect to international standards.