The truss core panel has been verified to be effective for structural weight reduction in former research studies. However, it is difficult to manufacture using the sheet metal pressing method because the forming height of the truss core panel is limited by the physical properties of the material. Although progressive stamping has been used to solve this problem, it is still difficult to practically use the truss core panel. In this study, the author proposed a manufacturing method and a hexagonal frustum intermediate structure to improve the forming quality of truss core panels using a progressive stamping method and verified its effectiveness through numerical analysis and prototype experiments. Compared to the conventional hemispherical intermediate model, the manufacturing process of the truss core panel using the proposed method was significantly improved.
21 March 2023 in International Journal of Mechanical Engineering and Applications
Honeycomb core panels are commonly used in industry as lightweight structures. However, because the bond between the face plate and the regular hexagonal core is weak, there are strength problems, such as heat and shear loads. In this study, a new cubic core panel was developed as an alternative to a honeycomb core panel. Unlike conventional honeycomb core panels, cubic cores can be processed from a single flat plate by punching and bending. Through the square contact area between the face plate and the cubic core, a double-bond integral panel structure was assembled using glue and rebates. The cubic core panel had a higher bending stiffness and bonding strength than the conventional honeycomb panel. A three-point bending test was performed on the processed cubic core panel. The relationship between the bending load and the deformation of the cubic core panel was determined. The curved part of the cubic core panel can be easily processed by cutting out a part of the material on one side of the cubic core panel in accordance with the lightweight structure of the curved part. A design formula for the curved part of the cubic core panel was derived using the curvature radius and curvature angle of the actual curved structure. A cubic core molding system was investigated using the parallel movement characteristics of the four-bar link mechanism for future mass production. An important design factor for practical use was obtained by deriving the relational expression between the bending load and plastic displacement.
In this study, a new assembled truss core panel and the method for processing it were proposed in order to improve the performance of the lightweight panel structure. The proposed assembled truss core panel can be easily processed by simple punching and bending. A processing experiment on an assembled truss core panel was conducted using an aluminum plate with a thickness of 1.0 mm, and the validity and performance of the proposed processing method were verified. A three-point bending test was performed using an assembled truss core panel obtained using the processing experiment. The assembled truss core panel had a relatively high bending stiffness in its early elastic deformation and a relatively long-lasting bending deformation after the initial failure. Its application as a lightweight panel has been confirmed. In order to compare it with the most commonly used honeycomb lightweight panel, FEM (finite element method) analysis was performed on the assembled truss core panel and on the honeycomb panel under the same conditions. The bending stiffness of the assembled truss core panel was found to be 10.60% higher than that of the honeycomb panel. Furthermore, to improve the productivity of the assembly-type truss core panel, construction of a production line using progressive dies was proposed, and the possibility of practical development for mass production was examined.