Ahmed Sulima Bader Ali

Dr. Ahmed Sulima Bader Ali

college of engineering, Universiti Teknologi MARA (UiTM), Shah Alam, Selangor, Malaysia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
AMAbdalrhman Milad
Abdalrhman Milad
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali
Ali Mohammed BabalghaithAli Mohammed Babalghaith
Ali Mohammed Babalghaith
ZMZubair Ahmed Memon
Zubair Ahmed Memon
Nuha MashaanNuha Mashaan
Nuha Mashaan
Nur Izzi Md YusoffNur Izzi Md Yusoff
Nur Izzi Md Yusoff
The use of geopolymer in pavement constructions is strongly encouraged. Many studies have demonstrated the vast potential of using industrial-by-products-based geopolymers. This paper discusses the modification of asphalt binders with geopolymers, namely geopolymer-modified asphalt (GMA) and geopolymer-modified asphalt mixture (GMAM). In addition, curing geopolymer materials, engineering properties, production techniques, and prospective utilisation in the pavement construction, such as durability and sustainability, are also discussed. The literature review showed that many industrial by-products, including red mud, blast furnace slag, fly ash, and mine waste, are used to produce geopolymers because of the metal components such as silicon and aluminium in these materials. The geopolymers from these materials influence the rheological and physical properties of asphalt binders. Geopolymers can enhance asphalt mixture performance, such as stability, fatigue, rutting, and low-temperature cracking. The use of geopolymers in asphalt pavement has beneficial impacts on sustainability and economic and environmental benefits.

6 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali
AAAllam Musbah Al Allam
Allam Musbah Al Allam
SAShaban Ismael Albrka Ali
Shaban Ismael Albrka Ali
HHHaytham Haytham
Haytham Haytham
Ali Mohammed BabalghaithAli Mohammed Babalghaith
Ali Mohammed Babalghaith
Mohammad KhisheMohammad Khishe
Mohammad Khishe
This study investigated the chemical properties of peat microparticles modified asphalt (Pt.M.A.). The originality of the study resides in the examination of the chemical characteristics of peat microparticles (Pt.) modified asphalt (Pt. M.A.) utilising FTIR, SEM, SFE, and XRD methodologies. This encompasses Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), surface free energy (SFE), and X-ray diffraction (XRD). Initially, FTIR examined the functional groups of both unaltered and altered asphalt binders. The SEM images reveal improved compatibility, showcasing superior diffusion of the modifier across the asphalt. A further critical factor is that improved adhesion properties, according to the SFE study, indicate that modified binders generally offer more SFE compared to unmodified binders. The XRD measurements revealed a semi-crystalline structure in the Pt. modifier and an amorphous structure in the basal asphalt binder. The integration of Pt. into the asphalt cement resulted in modifications to the phases of both constituents, culminating in the emergence of a new semi-crystalline phase inside the modified asphalt binder. These data suggest that peat microparticles (Pt.) can improve the efficacy of asphalt binders by enhancing compatibility, adhesion, and resistance to ageing.

13 May 2018
Verified
Book Chapter
Closed access
PDF file
NUNura Usman
Nura Usman
MMMohd Idrus Mohd Masirin
Mohd Idrus Mohd Masirin
KAKabiru Abdullahi Ahmad
Kabiru Abdullahi Ahmad
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali

9 November 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MAMustafa Alas
Mustafa Alas
Shaban Ismael Albrka Ali ZangenaShaban Ismael Albrka Ali Zangena
Shaban Ismael Albrka Ali Zangena
Ahmed EltwatiAhmed Eltwati
Ahmed Eltwati
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali
AAAllam Musbah Alallam
Allam Musbah Alallam
The influence of Acrylate Styrene Acrylonitrile (ASA) and ASA/nanosilica (ASA/Si) additives was investigated by using a dynamic shear rheometer (DSR). Firstly, an ASA polymer was blended with the virgin asphalt binder at two different concentrations (3% ASA and 5% ASA). After observing that 5% ASA was the optimum concentration for modification, nanosilica particles were further incorporated into the 5% ASA-modified asphalt binder with two different percentages (5% ASA 3%Si; 5% ASA 5%Si). Frequency sweep tests were conducted across various frequencies at elevated temperatures. The experimental outcomes were analyzed using master curves, rutting, and fatigue resistance parameter plots. Additionally, to provide a more holistic analysis, two different multicriteria decision analysis (MCDA) techniques, namely the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and the Technique for the Order of Preference by a Similarity to Ideal Solution (TOPSIS), were conducted to identify the best-performing asphalt binder by considering three different parameters: workability, performance under different conditions, and cost. The frequency sweep tests showed that the 5% ASA 5%Si asphalt worked best in terms of resistance to rutting. On the other hand, the virgin binder performed better than all modified binders when it failed to resist fatigue. On the other hand, the PROMETHEE analysis identified the 5% ASA-modified asphalt binder as the optimal choice, while the TOPSIS analysis determined that the 5% ASA 3%Si-modified binder provided the best performance. The differences between the experimental results and the MCDA were due to using more than one evaluation parameter and looking at how well the asphalt binder worked at different temperature ranges at the same time.

10 December 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
NMNaeem Aziz Memon
Naeem Aziz Memon
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali
NYNur Izzi Md. Yusoff
Nur Izzi Md. Yusoff
AAAllam Musbah Al Allam
Allam Musbah Al Allam
HHHaytham Haytham
Haytham Haytham
Mohammad KhisheMohammad Khishe
Mohammad Khishe
This study presents a comprehensive investigation into the optimization of crumb rubber modified bitumen (CRMB) performance by systematically analysing the effects of blending parameters and material characteristics. The effects of blending temperature, mixing speed, blending time, and mixer type on the viscosity and stability of CRMB were systematically evaluated using a fixed 40/60 penetration grade binder and 15% CR-A (ambient ground, #40 mesh) in the first phase of this study. However, the influence of three bitumen grade (40/60, 70/100, 100/150), two crumb rubber types (CR-A and CR-B), three mesh sizes (#30, #40, #50), and four CR contents (10%, 15%, 17.5%, and 20%) was evaluated with blending protocol devised initially. Viscosity, penetration, and softening point were measured, yielding significant improvements; 15% CR addition in the 40/60 binder reduced penetration from 48 to 38 dmm and increased the softening point from 52.5 °C to 58.4 °C. Chemical interactions were assessed through SARA fraction analysis, revealing a strong inverse correlation between aromatic content and final viscosity with r = -0.78. The blending process was further optimized using factorial design and statistical analysis, identifying high shear mixing at 180 °C for 90 min (2000–3000 rpm) as the ideal condition. This setting produced homogenous, stable blends, with equilibrium viscosity values for the tested combinations ranging from 2.7 to 3.6 Pa·s. Multi-factor ANOVA confirmed significant effects (p < 0.001) of blending temperature, CR type, and bitumen grade. Regression models developed for the materials tested achieved strong predictive power (R2 = 0.85), highlighting that higher aromatic content reduced viscosity, while resins and asphaltenes contributed to increased stiffness. The study demonstrates that performance optimization requires not only controlled blending conditions but also informed material selection. This dual approach provides a reliable foundation for scalable, efficient, and sustainable CRMB production.

28 December 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Ahmed Sulima Bader AliAhmed Sulima Bader Ali
Ahmed Sulima Bader Ali
SAShaban Ismael Albrka Ali
Shaban Ismael Albrka Ali
AAAllam Musbah A. L. Allam
Allam Musbah A. L. Allam
HHHaytham Haytham
Haytham Haytham
BSBilal Shaban
Bilal Shaban
Mohammad KhisheMohammad Khishe
Mohammad Khishe
Road traffic crashes (RTCs) are considered one of the major public health issues in many countries worldwide. Investigating factors of traffic crashes, accidents, and disasters can facilitate and aid in identifying measures to mitigate their frequency and severity as well as occurrence and impact, thereby enhancing road safety. This study aims to investigate the factors that contribute to road traffic accidents in the Gaza Strip, Palestine. A comprehensive questionnaire, comprising four sub-groups of factors: human, vehicle, road, and environmental, collected data from a sample of respondents, including drivers, passengers, pedestrians, and other road users. The study utilized the relative importance index (RII) to analyze and classify each factor group after analyzing 385 questionnaires in SPSS. Over 83% of respondents across all age categories identified overspending as the most significant factor causing road traffic crashes, according to the study’s findings. Additionally, more than 78% of respondents believed that weak braking or brake failure was the highest and most significant vehicle-related factor contributing to road traffic crashes. Among the road factors, 75.4% of respondents identified low or no street illumination as a significant contributor to road traffic crashes, ranking it as the fourth most influential element overall, while environmental factors had the least impact compared to other variables.