Low-modulus β-type Ti-45Nb alloy is a promising implant material due to its good mechanical biocompatibility, non-toxicity, and outstanding corrosion resistance. Its excellent chemical stability brings new challenges to chemical surface modification treatments, which are indispensable for both osteogenesis and antibacterial performance. Coatings containing metal ions as anti-microbial agents can be an effective way to reduce implant-associated infections caused by bacterial biofilm. Gallium ion (Ga3+) has the potential to reduce bacterial viability and biofilm formation on implant surfaces. In this study, a novel two-step process has been proposed for Ga3+ incorporation in hydroxyapatite (HAP) to develop bioactive and antibacterial surfaces on Ti-45Nb alloy. For the generation of bioactive surface states, HAP electrodeposition was conducted, followed by wet chemical immersion treatments in gallium nitrate (1 mM). Different buffers such as phosphate, sodium bicarbonate, ammonium acetate, and citrate were added to the solution to maintain a pH value in the range of 6.5–6.9. Coating morphology and HAP phases were retained after treatment with gallium nitrate, and Ga3+ ion presence on the surface up to 1 wt.% was confirmed. Combining Ga and HAP shows great promise to enable the local delivery of Ga3+ ions and consequent antibacterial protection during bone regeneration, without using growth factors or antibiotics.
Dual phase (DP) steels are rapidly becoming more and more popular for automotive applications. They offer a weight reduction with a combination of energy absorption for crash zones. Rails, reinforcements, back panels, cross members, and pillars can be given as application examples. DP steels microstructure consists of a soft ferrite matrix with hard martensite islands. The hard martensite islands provide strength while the ductile ferrite provides formability. The strength level of DP steel is related to the amount of martensite in the microstructure, and the martensite amount can be arranged via intercritical annealing. In this work, thermodynamic analysis of St52 steel was carried out with Thermo-Calc software. A1 and A3 temperatures were determined by calculating the temperature-dependent phase fractions. Intercritical annealing temperatures were determined according to the calculated critical temperatures (A1 and A3). The intercritical annealing process was modelled by using Simheat NxT software. In this modelling and simulation work, the effect of intercritical annealing temperature on the final microstructure and hardness of DP steel was investigated.
1 March 2023 in Konya Journal of Engineering Sciences
As a material forming method, cold forging is preferred due to the reasons like absence of a heating step and high surface quality. Recently, the finite element method (FEM) has received growing attention for controlling and predicting final material properties for cold forging applications. FEM combines microstructure evolution models with failure criteria, thus providing solutions to complicated problems in the modern cold forging industry. The fastener industry extensively utilizes cold forging, in which manganese and boron-containing steels like 27MnB4 can be formed to obtain high mechanical properties. The current study investigates the effect of two different heat treatments, namely softening and spheroidizing annealing, on the formability of 27MnB4 bolts. Softwares such as Thermo-Calc 2022a and Forge NxT 3.2 were used to predict the microstructure of the wire rod and evaluate the cold forming process of the same rod under two different heat treatment conditions. Therefore, the current study also provides a relationship between microstructural features and the cold formability of 27MnB4 steel. The microstructure of 27MnB4 is predicted by CCT diagrams. The predicted microstructure corresponds to the microstructure of 27MnB4 samples taken from the production line. In addition, temperature, von Mises stress, and equivalent strain distributions for 27MnB4 steel in the hot rolled state were calculated higher than in annealed states due to the differences in the microstructure. These results demonstrate that computational material engineering methods and simulation techniques could be practical tools for cold forming processes.