One of aviation’s major challenges for the upcoming decades is the reduction in its climate impact. As synthetic kerosene and green hydrogen are two promising candidates, their potentials in decreasing the climate impact is investigated for the mid-range segment. Evolutionary advancements for 2040 are applied, first with an conventional and second with an advanced low-NOx and low-soot combustion chamber. Experts and methods from all relevant disciplines are involved, starting from combustion, turbofan engine, overall aircraft design, fleet level, and climate impact assessment, allowing a sophisticated and holistic evaluation. The main takeaway is that both energy carriers have the potential to strongly reduce the fleet level climate impact by more than 75% compared with the reference. Applying a flight-level constraint of 290 and a cruise Mach number of 0.75, causing 5% higher average Direct Operating Costs (DOC), the reduction is even more than 85%. The main levers to achieve this are the advanced combustion chamber, an efficient contrail avoidance strategy, in this case a pure flight-level constraint, and the use of CO2 neutral energy carrier, in a descending priority order. Although vehicle efficiency gains only lead to rather low impact reduction, they are very important to compensate the increased costs of synthetic fuels or green hydrogen.
6 December 2023 in Journal of Engineering for Gas Turbines and Power
The water-enhanced turbofan (WET) is a promising future propulsion concept to reduce aero engine emissions. In the WET-engine, a heat exchanger uses turbine exhaust heat in order to generate superheated steam out of liquid water. For evaporator design, computational fluid dynamics (CFD) simulations are necessary since correlation-based predictions have a high uncertainty during preliminary design. A common way of modeling steam loaded flows is the integration of gas models into CFD analysis. However, to the author's knowledge, there is no gas model published that accounts for the exact gas composition of turbine exhaust flows with high steam loads and is commonly used by low- and high-fidelity methods. Therefore, a gas model predicting the thermodynamic behavior of the turbine exhaust flow considering high steam loads is presented and integrated into an existing CFD solver. The approach is able to incorporate the implemented gas model into the CFD simulation by two methods: runtime and offline. The offline method has a computational advantage in iteration time compared to the runtime integration. As demonstration case, a single two-dimensional cylinder is considered. A variation of the steam loading of the flow shows a significant effect on local properties and therefore on local and average heat transfer. Increasing the steam loading up to 40% results in an increase of the average Nusselt number of 17%.