This analysis compares the energy efficiency and operational costs of combustion vehicles (Hyundai Accent 1.6 L and Chevrolet Sail 1.5 L) with the Nissan Leaf, an electric vehicle, under current fuel and electricity pricing in Ecuador. Combustion vehicles, converting gasoline into mechanical energy, demonstrate substantial energy losses, leading to higher operational costs, especially with recent gasoline price hikes to USD 2.722 per gallon. In stark contrast, the Nissan Leaf exhibits significantly greater energy efficiency, consuming only 15–20 kWh per 100 km, which translates to lower running costs (USD 11.20 to fully charge a 40 kWh battery). Despite the clear economic and environmental benefits of electric vehicles, their adoption in Ecuador is hampered by geographical challenges such as diverse terrain that can affect vehicle range and battery longevity. Moreover, the limited and uneven distribution of EV charging stations, mostly concentrated in urban areas, poses significant barriers. For broader implementation, a strategic expansion of the EV infrastructure and careful consideration of the national energy grid’s capacity to support increased electric vehicle uptake are essential. Addressing these challenges is crucial for realizing the full potential of electric vehicles in enhancing Ecuador’s sustainability and energy independence.
The article is about of research of the behavior of magnetorheological materials (MR), later it will be implemented in a prototype leg prosthesis with active damping for people who have suffered amputations in lower extremities, which considers the use of an actuator with Magnetorheological Fluids (MRF) LORD MRF – 140 CG, whose control is based on the adjustment of the magnetic field applied to the MRF using in its design the main parameters of anatomy and biomechanics of the foot-leg system, so that the force applied in the course of the gait cycle it can be absorbed by the prosthesis, reducing the impact on the user's column thus allowing the prosthesis to be subjected to tests for emulation in different positions according to the applied load.
This study presents an energy-based assessment of a battery electric sport utility vehicle (SUV) tested under high-altitude and high-gradient real-world conditions in Ambato, Ecuador, at approximately 2500 m above sea level. A low-cost instrumentation setup composed of a Global Navigation Satellite System (GNSS) device, a Fluke 393 FC clamp meter, and an On-Board Diagnostics II (OBD-II) interface was used to evaluate zero, positive, and negative road-gradient conditions in Normal and Sport driving modes. The results show that positive gradients increased the acceleration energy from 0.0454 to 0.0658 kWh in Normal mode and from 0.0351 to 0.0535 kWh in Sport mode. In contrast, negative gradients favored regenerative braking, with Normal mode reaching a net energy balance of kWh and a segment-level recovery ratio of 194.38%. This value reflects the contribution of gravitational potential energy. Sport mode showed lower regenerative performance, particularly during uphill operation, where the recovery ratio decreased to 8.96%. These findings demonstrate that low-cost instrumentation can capture representative route-level energy trends and support real-world electric vehicle (EV) energy assessment in topographically complex high-altitude environments.
El presente capitulo expone una revisión crítica sobre la aplicación de herramientas tecnológicas en la enseñanza de carreras técnicas universitarias en Ecuador, con un enfoque centrado en la pertinencia pedagógica y las condiciones institucionales que condicionan su implementación y eficacia en el desarrollo de aprendizajes significativos. A partir de una aproximación contextualizada, se analizó cómo las tecnologías digitales pueden contribuir al desarrollo de competencias profesionales, siempre que se inserten en una planificación didáctica coherente con los principios de la formación técnica superior. En el texto, se examinan diferentes tipos de herramientas, simuladores, plataformas de gestión, aplicaciones y recursos audiovisuales, los mismos que fueron clasificando según su funcionalidad y evaluando sus ventajas, limitaciones y condiciones de uso óptimas. Se generaliza que la efectividad de estas herramientas tecnológicas no depende únicamente de su diseño técnico, sino del acompañamiento y aplicación docente, la infraestructura disponible, la formación pedagógica y didáctica del docente y la alineación con el perfil profesional del estudiante. Igualmente, se identificaron tensiones estructurales como la brecha digital, la escasa articulación con el sector productivo y la insuficiencia de políticas institucionales sostenidas que limitan un uso efectivo de herramientas digitales en un contexto de educación técnica universitaria. El capítulo expone un análisis de percepciones docentes y prácticas institucionales, destacando que una innovación educativa efectiva requiere políticas inclusivas, liderazgo académico, formación continua y participación de la comunidad educativa. Se concluye que la integración tecnológica en la educación técnica debe ser comprendida como una estrategia pedagógica crítica y no como una simple incorporación instrumental, orientada a consolidar una educación pertinente, equitativa y de calidad.
The spherical wheel robot represents a new concept of analysis for traditional locomotion systems, this robot presents a stable dynamic to achieve the balance and movement on a sphere that is with a single point of contact with the ground. Having a sphere as a means of support and movement unit for the robot, offering advantages in the translation and rotation in a single point allowing the ability to overcome obstacles by omnidirectional movements, thus reducing the number of maneuvers and rotations to execute a movement. For the modeling of the system, it is analyzed as an inverted pendulum system, where a kinematic and dynamic modeling is totally required to obtain a description of the forces, voltages, positions, speeds, torques, moments of inertia that act directly on the system for approximate the real behavior of the system, which is analyzed under three independent 2D models and modeled in 3D.
El presente proyecto de investigación tiene el propósito de diseñar e implementar un calefón prototipo de inducción electromagnética para viviendas unifamiliares, con el principal objetivo de realizar un estudio investigativo que determine sí la inducción electromagnética es la manera más adecuada de proveer agua caliente para el uso en éste tipo de hogares. El proyecto utiliza un sistema existente (cocina a inducción), en la cual se adapta un sistema de paso de agua construido con acero inoxidable, éste se calienta debido a la inducción y transmite el calor al agua que por él se encuentra en circulación. Con este sistema se pretende analizar la eficiencia de los sistemas de calentamiento a inducción frente a los sistemas eléctricos convencionales, se realizan diferentes pruebas donde se utiliza tanto el prototipo como un sistema eléctrico convencional. Para determinar la eficiencia de los diferentes sistemas se procede a medir la energía eléctrica utilizada en el sistema de calentamiento y la cantidad de energía que es trasmitida al agua, para ello se debe conocer el volumen de agua utilizada y el gradiente de temperatura alcanzada. Una vez conocida la eficiencia de cada uno de los sistemas se puede determinar sí el calentamiento por inducción es la mejor alternativa para proveer de agua caliente a las viviendas unifamiliares.