Aliyu M. Aliyu

Dr. Aliyu M. Aliyu

School of Engineering, University of Lincoln, Lincoln, Lincolnshire, UK
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2024 in Energies
Verified
Journal Article
Open access
PDF file
Amith KarayilAmith Karayil
Amith Karayil
AEAhmed Elseragy
Ahmed Elseragy
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
Carbon dioxide, the leading contributor to anthropogenic climate change, is released mainly via fossil fuel combustion, mostly for energy generation. Carbon capture technologies are employed for reducing the emissions from existing huge point sources, along with capturing them from direct air, to reduce the existing concentration. This paper provides a quantitative analysis of the various subtypes of carbon capture technologies with the aim of providing an assessment of each from technological, social, geo-political, economic, and environmental perspectives. Since the emissions intensity and quantity, along with the social–political–economic conditions, vary in different geographic regions, prioritising and finding the right type of technology is critical for achieving ambitious net-zero targets. Four main types of carbon capture technology were analysed (adsorption, absorption, membrane, and cryogenic) under four scenarios depending on the jurisdiction. The Technique for Order of Preference by Similarity to Ideal Solution (also known as the TOPSIS method) was used to establish a quantitative ranking of each, where weightages were allocated according to the emissions status and economics of each depending on the jurisdiction. Furthermore, forecasting the trends for technology types vis à vis carbon neutral targets between 2040 and 2050 was carried out by applying regression analysis on existing data and the emissions footprint of major contributing countries. The study found the membrane score to be the highest in the TOPSIS analysis in three of the four scenarios analysed. However, absorption remains the most popular for post-combustion capture despite having the highest energy penalty per ton of CO2 capture. Overall, capture rates are well short of projections for carbon neutrality; the methodology put forward for prioritising and aligning appropriate technologies and the region-by-region analysis will help highlight to technocrats, governments, and policymakers the state of the art and how to best utilise them to mitigate carbon emissions—critical in achieving the net-zero goals set at various international agreements on climate change.

1 June 2017 in Experimental Thermal and Fluid Science
Verified
Journal Article
Open access
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
YBYahaya Baba
Yahaya Baba
LLLiyun Lao
Liyun Lao
HYHoi Yeung
Hoi Yeung
KKKyung Chun Kim
Kyung Chun Kim
Accurate prediction of interfacial friction between the gas and liquid in annular two-phase flow in pipes is essential for the proper modelling of pressure drop and heat transfer coefficient in pipeline systems. Many empirical relationships have been obtained over the last half century. However, they are restricted to limited superficial liquid and gas velocity ranges, essentially apply to atmospheric pressures, and the relationships are only relevant for pipes with inner diameters between 10 and 50 mm. In this study, we carried out experiments in a large diameter flow loop of 101.6 mm internal diameter with the superficial gas and liquid ranges of 11–29 m/s and 0.1–1.0 m/s respectively. An examination of published interfacial friction factor correlations was carried out using a diverse database which was collected from the open literature for vertical annular flow. The database includes measurements in pipes of 16–127 mm inner diameter for the liquid film thickness, interfacial shear stress, and pressure gradient for air-water, air-water/glycerol, and argon-water flows. Eleven studies are represented with experimental pressures of up to 6 bar. Significant discrepancies were found between many of the published correlations and the large pipe data, primarily in the thick film region at low interfacial shear stress. A correlation for the interfacial friction factor was hence derived using the extensive database. The correlation includes dimensionless numbers for the effect of the diameter across pipe scales to be better represented and better fit the wide range of experimental conditions, fluid properties, and operating pressures

1 January 2016 in International Journal of Multiphase Flow
Verified
Journal Article
Open access
AAAlmabrok A. Almabrok
Almabrok A. Almabrok
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
LLLiyun Lao
Liyun Lao
HYHoi Yeung
Hoi Yeung

1 June 2018 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
YBYahaya Baba
Yahaya Baba
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
Archibong Archibong-EsoArchibong Archibong-Eso
Archibong Archibong-Eso
Mukhtar AbdulkadirMukhtar Abdulkadir
Mukhtar Abdulkadir
LLLiyun Lao
Liyun Lao
HYHoi Yeung
Hoi Yeung

1 July 2017 in Experimental Thermal and Fluid Science
Verified
Journal Article
Open access
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
AAAlmabrok A. Almabrok
Almabrok A. Almabrok
YBYahaya Baba
Yahaya Baba
Archibong Archibong-EsoArchibong Archibong-Eso
Archibong Archibong-Eso
LLLiyun Lao
Liyun Lao
KKKyung Chun Kim
Kyung Chun Kim
The entrained droplet fraction is an important parameter in annular two-phase flow, as its correlations are key inputs in flow simulation codes for the prediction of pressure drop and critical heat flux or dryout. Investigators have stressed the importance of extending the validity range of current correlations so that more conditions are covered. This could be achieved for example by including fluids with higher viscosities, a wider range of operating pressures, and increase in the size of pipes used for experiments (most of the data in the literature are from pipes of 50 mm diameter and below). In attempt to improve the latter, experiments were conducted in a 101.6 mm gas–liquid flow loop at Cranfield University’s Oil and Gas Engineering Laboratory and data on the fraction of droplets were collected in the annular flow regime by measuring the film velocity, from which the droplet fraction was calculated. Comparison of the film velocity by this method and by a mass balance showed close agreement. A capacitance Wire Mesh Sensor was used for flow visualisation in order to distinguish between annular and churn flow. In order to arrive at an improved correlation, over 1300 data points were gathered from other published works. These include air–water studies where large pipes of up to 127 mm in diameter were used. The others were from small-diameter pipes and for refrigerant, steam–water, air–water, and air–glycerine flows. Since in the annular regime, the gas flow entrains liquid droplets into the core, their presence alters the properties of the gas core. Therefore, accurate predictions are pivotal for the energy efficient design and operation of facilities in the petroleum and nuclear power industry. The correlation obtained here showed good agreement with the collected databank

23 March 2023 in International Journal of Multiphase Flow
Verified
Journal Article
Open access
Aliyu M. AliyuAliyu M. Aliyu
Aliyu M. Aliyu
RCRaihan Choudhury
Raihan Choudhury
Behnaz SohaniBehnaz Sohani
Behnaz Sohani
JAJohn Atanbori
John Atanbori
JRJoseph X.F. Ribeiro
Joseph X.F. Ribeiro
Professor Rakesh MishraProfessor Rakesh Mishra
Professor Rakesh Mishra