Desalination is commonly adopted nowadays to overcome the freshwater scarcity in some areas of the world if brackish water or salt water is available. Different kinds of technologies have been proposed in the last century. In this paper, the state of the mainstream solutions is reported, showing the current commercial technologies like reverse osmosis (RO), Multi-Stages Flash desalination (MSF) and Multi-Effect Distillation (MED), and the new frontiers of the research with the aim of exploiting renewable sources such as wind, solar and biomass energy. In these cases, seawater treatment plants are the same as traditional ones, with the only difference being that they use a renewable energy source. Thus, classifications are firstly introduced, considering the working principles, the main energy input required for the treatment, and the potential for coupling with renewable energy sources. Each technology is described in detail, showing how the process works and reporting some data on the state of development. Finally, a statistical analysis is given concerning the spread of the various technologies across the world and which of them are most exploited. In this section, an important energy and exergy analysis is also addressed to quantify energy losses.

The proposal of new technologies capable of producing electrical energy from renewable sources has driven research into seas and oceans. Research finds this field very promising in the future of renewable energies, especially in areas where there are specific climatic and morphological characteristics to exploit large amounts of energy from the sea. In general, this kind of energy is referred to as six energy resources: waves, tidal range, tidal current, ocean current, ocean thermal energy conversion, and saline gradient. This review has the aim to list several wave-energy converter power plants and to analyze their years of operation. In this way, a focus is created to understand how many wave-energy converter plants work on average and whether it is indeed an established technology.

The importance of renewable energy exploitation reduces the energy dependence on fossil fuels. Despite technological progress, in several remote areas and small islands the energy production is nowadays dominated by the utilization of fossil fuels. With new, increasingly stringent laws on polluting emissions and the need to lower production costs, it is necessary to exploit as many renewable sources as possible. In order to implement these considerations, it was decided to study renewable energy production. The study was carried out by estimating the energy production on a monthly and annual basis considering a mix of three plants, namely marine, solar, and wind. Simulations on wave production were carried out on a new device developed by the research team at the University of Palermo. In order to be able to perform these simulations, input climate data are required. These data are normally available in literature or obtainable by using specific GIS tools. As criterium, the Levelized Cost of Energy, normally applied to a single technology, is extended to the entire energy mix. Minimizing this parameter, the best solution is individuated, and capable of supplying 50% of the summer electrical load with renewable energy sources. The results carried out from a case study based in aeolian islands show that the solar production reaches 10.2%, the wind production reaches 45.47% and sea wave production reaches 3.04%. In this way, the diesel production decreases to 41.29%. This method can be easily applied for several small islands, estimating for several sites the ability to reduce the energy production from fossil fuels.

The necessity to improve the energy saving potential of buildings is now a duty. European and national policies are being implemented to address the important decisions being made on this subject. For these reasons, several studies focus on this relevant topic. This paper review not only focusses on it but studies it in-depth. A commercial 3D simulation software was used to design a building sited in Palermo estimating the thermal losses before and after external envelope insulation. In particular, all the thermal bridges (TBs) were analysed with the finite element method (FEM) and mitigated with rock wool insulation. The paper shows the linear thermal transmittance difference and heat flux loss before and after TB mitigation. The results confirm the importance of installing an external insulation layer in the old building envelope. The linear thermal transmittance of TBs and the associated heat flux loss often decrease by more than 50%.

Permanent Magnet Linear Generators (PMLGs) are currently being studied for sea wave energy harvesting. Typically, a PMLG consists of an iron-made armature and a moving translator. The permanent magnets adoption produces parasitic effects, such as cogging force, and the machine weight increment. A solution could be the adoption of an ironless configuration, accepting a power density reduction. This paper investigates the use of ironless PMLGs in sea wave energy conversion systems by an experimental comparative analysis between an iron PMLG prototype and an ironless PMLG prototype, which share the same geometry. The main electrical and mechanical parameters (resistance, mass, and magnetic fields) were preliminarily measured. Subsequently, open-circuit and load tests were carried out to compare the induced voltages, the energy transferred to a resistive load, efficiency and the load average power. The reported comparison shows that iron PMLG performances are significantly superior to the ironless ones during the open-circuit tests, as expected. However, the analysis carried out through the load tests shows that the cogging force significantly limits the energy production, obtaining similar values in both machines. Therefore, the experimental tests justify the use of ironless machines in sea wave energy harvesting, where the maximization of energy production is a relevant target.

Electrical and thermal consumption related to buildings, whether civil, commercial, public, or of any other kind, is very much in focus today. With today’s targets for energy savings, reduction of consumption, and environmental impact, it is necessary to carry out energy retrofits to modernize installations and their management. The realization of an effective improvement requires a careful analysis of the case study because each category of building has different requirements such as different load profiles and different installations and needs. This was carried out by studying the electrical and thermal load profiles. A good initial energy audit can provide the retrofit solutions capable of achieving the reduction of energy consumption and the emission of climate-changing gases into the atmosphere. A case study, carried out by the Department of Engineering of Palermo, showed how it is possible to perform an energy retrofit to modernize the energy system of the student dormitory at the University of Palermo. The paper presented a study carried out by programming a series of interlinked calculations in Microsoft Excel. In order to quantify the energy savings of the structure under examination, it is necessary to enter some input data, thanks to which all the formulas implemented in the calculation software were automatically completed. The programming of the calculations makes it possible to carry out an energy retrofit with interventions on the building envelope and the installations. The desire to program an automated calculation by modifying only the input data is intended to replicate a study on other buildings with the same peculiarities. In this way, it is possible to verify which retrofit hypotheses would be useful to upgrade old public administration buildings. In the analyzed case study, 65% of electrical energy and 33% of thermal energy could be saved by replacing generation systems, installing a co-generator, replacing windows, and replacing lamps with LED ones.