This paper presents the results of an environmental assessment of a Nickel-Manganese-Cobalt (NMC) Lithium-ion traction battery for Battery Electric Light-Duty Commercial Vehicles (BEV-LDCV) used for urban and regional freight haulage. A cradle-to-grave Life Cycle Inventory (LCI) of NMC111 is provided, operation and end-of-life stages are included, and insight is also given into a Life Cycle Assessment of different NMC chemistries. The environmental impacts of the manufacturing stages of the NMC111 battery are then compared with those of a Sodium-Nickel-Chloride (ZEBRA) battery. In the second part of the work, two electric-battery LDCVs (powered with NMC111 and ZEBRA batteries, respectively) and a diesel urban LDCV are analysed, considering a wide set of environmental impact categories. The results show that the NMC111 battery has the highest impacts from production in most of the impact categories. Active cathode material, Aluminium, Copper, and energy use for battery production are the main contributors to the environmental impact. However, when vehicle application is investigated, NMC111-BEV shows lower environmental impacts, in all the impact categories, than ZEBRA-BEV. This is mainly due to the greater efficiency of the NMC111 battery during vehicle operation. Finally, when comparing BEVs to a diesel LDCV, the electric powertrains show advantages over the diesel one as far as global warming, abiotic depletion potential-fossil fuels, photochemical oxidation, and ozone layer depletion are concerned. However, the diesel LDCV performs better in almost all the other investigated impact categories.
A cradle-to-grave life cycle assessment focused on end-of-life (EoL) was conducted in this study for three configurations of a light-duty commercial vehicle (LDCV): diesel, compressed natural gas (CNG), and battery electric vehicle (BEV). The aim is to investigate the impact of recycling under two EoL scenarios with different allocation methods. The first is based on the traditional avoided burden method, while the second is based on the circular footprint formula (CFF) developed by the European Commission. For each configuration, a detailed multilevel waste management scheme was developed in compliance with the 2000/53/CE directive and ISO22628 standard. The results showed that the global warming potential (GWP) impact under the CFF method is significantly greater when compared to the avoided burden method because of the A-parameter, which allocates the burdens and benefits between the two connected product systems. Furthermore, in all configurations and scenarios, the benefits due to the avoided production of virgin materials compensate for the recycling burdens within GWP impact. The main drivers of GWP reduction are steel recycling for all of the considered LDCVs, platinum, palladium, and rhodium recycling for the diesel and CNG configurations, and Li-ion battery recycling for the BEV configuration. Finally, the EoL stage significantly reduces the environmental impact of those categories other than GWP.
Several next-generation cells are now being researched to overcome the performance and sustainability limitations of the current Li-ion cells. The aim of this article is to assess the environmental impacts of the following next-generation cells chosen for their potential to meet the performance and safety requirements for future electric vehicle applications: Silicon-Polyacrylonitrile (SiCPAN), Silicon NanoWires (SiNWs), All-Solid-State (ASS) and Lithium-Sulphur (Li-S). Because the selected cells are emerging technologies, solely produced at the laboratory scale, a novel cradle-to-gate Prospective Life Cycle Assessment (P-LCA) was performed to ensure a fair comparison with the current Li-ion cell. The life cycle inventories of the selected cells were built by scaling up all the laboratory scale processes and activity data to industrial scale. The methodology is compliant with the most used frameworks for conventional LCAs, namely ISO 14040:2006 and ISO 14044:2018, and state-of-the-art guidelines for P-LCAs. The results showed that the Li-S cell has lower impact with respect to the current Li-ion cell in four out of the six most relevant impact categories, among which use of mineral and metal resources. The SiNWs cell revealed the greatest impact in almost all the impact categories. Lastly, a what-if analysis conducted on the silver content revealed that the ASS cell produced without silver would be the least impactful cell among the next-generation cells considered in this study.
Compared to conventional fossil-fueled vehicles, electric vehicles offer several environmental benefits. However, even electric vehicles are not completely environmentally friendly because many of their parts are not recycled today. These parts, especially the magnets that power them, end up in landfills at the end of the vehicle’s life cycle. This study aims to evaluate the environmental impacts of recycled (NdDy)FeB permanent magnets obtained by means of a novel hydrogen-decrepitation-based, magnet-to-magnet recycling technique. The Life Cycle Assessment methodology was used to compare, on a like-to-like basis, recycled and virgin permanent magnets. The core data provided by an industry partner served as the foundation for modelling the recycling process. Three different functional units were investigated based on three parameters, namely the magnet mass, magnetization coercivity, and energy product. Results revealed that the recycled magnet outperformed the virgin magnet in most impact categories. In terms of carbon footprint, recycling permanent magnets through hydrogen decrepitation would allow for an 18─33% reduction with respect to their production from virgin materials, depending on the assumed functional unit.
Nowadays, the application of Life Cycle Assessment (LCA) methodologies to vehicles and automotive components like electric motors is a cutting-edge research field. The goal of this paper is to gain a better understanding of how electric motors affect the environment and to shed light on the effects of certain assumptions on the LCA results. The LCA methodology was used to assess a wide range of environmental impacts in a cradle-to-use perspective and compare several electric motors designed for passenger cars. First, a baseline motor was identified and assessed. Then, a comparative LCA was conducted based on a novel scenario analysis framework. This framework ensures consistency in location settings, vehicle parameter settings, and scenario considerations so that all the comparisons are conducted on a like-to-like basis. The study examined two alternative scenarios to investigate the effect of geographical boundaries and vehicle applications. The methodological choices, including the specific modelling of environmental impacts, scenario modelling, and dataset selection are transparent and based on existing scientific literature or industrial publicly available data sources. The findings of this study provide indications on the relative life-cycle performance of the different scenarios considered and good evidence on how intended application and geographical factors influence life-cycle performance of electric motors. Moreover, while the use phase resulted as the main driver of the emissions in climate change and use of fossil resources, the other environmental categories resulted in a more balanced contribution between manufacturing and use phases, highlighting the importance of eco-design choices.
11 June 2025 in IEEE Open Journal of Vehicular Technology
This study evaluates the environmental, economic, and social impacts of the life cycle of a battery pack for automotive applications. The analysis employs Life Cycle Assessment (LCA) for environmental assessment, Life Cycle Costing (LCC) for economic assessment, and Social Life Cycle Assessment (S-LCA) for social impact analysis. Key locations of non-European raw material extraction and refining are considered for the supply chain. Instead, European countries are considered the final destination for battery pack manufacturing and assembly, use, and End-of-Life (EoL). For the use and EoL phases, three scenarios are analyzed. The LCA results indicate that greenhouse gas emissions vary from 77.2 kg CO2-eq/kWh to 80.7kg CO2-eq/kWh across the evaluated scenarios. Similarly, the economic assessment estimates LCCs between 77.7 EUR/kWh and 79.4 EUR/kWh, depending on the scenario. The S-LCA results highlight significant risks related to fair pay across numerous countries during the raw material extraction phase, particularly for cobalt (Democratic Republic of the Congo), manganese (South Africa), nickel (Australia), lithium (Australia), and graphite (China). In addition, the score for health and safety concerns presents high risks associated with cobalt, manganese, and nickel mining. In contrast, no significant critical social impacts are found for the use and EoL phases.