Arya Wiranata

Mr. Arya Wiranata

University of Riau

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 October 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BIBahruddin Ibrahim
Bahruddin Ibrahim
AWArya Wiranata
Arya Wiranata
AMAlfian Malik
Alfian Malik
The use of natural rubber to resist bitumen is usually prone to degradation and aging. One method to overcome this problem is the addition of antioxidants. This study aims to determine the effect of the addition of antioxidants 1,2-dihydro-2,2,4-trimethyl-quinoline (TMQ) on natural rubber modified asphalt crepe rubber and its performance in short-term and long-term aging conditions. The modified rubber asphalt mixture’s manufacture begins by melting the crepe rubber at 200 °C before being mixed in asphalt at 165 °C. Addition of antioxidant TMQ during the stirring process of the mixture of asphalt and melted rubber. The crepe rubber content was 8, 10, and 12% w/w, while the TMQ content was 1, 2, and 3% w/w of the total sample weight. The modified asphalt samples’ characterization included penetration, softening point, weight loss after a rolling thin film oven test (RTFOT), penetration after RTFOT, and Marshall test. Review of the performance of asphalt under short-term aging conditions using a dynamic shear rheometer (DSR). Evaluation of asphalt performance under long-term aging conditions using Fourier-transform infrared spectroscopy (FTIR). The results showed that the fact that the best-modified asphalt product was the addition of 10% crepe rubber and 2% TMQ. The best-modified asphalt characteristics have penetration 68.70 dmm, softening point 55.45 °C, weight loss only 0.0579%, penetration after RTFOT 59.60, Marshall stability 1403.96 kg with optimum asphalt content of 5.50%, and rutting factor (G*/Sinδ) 6.91 kPa and 16.1 kPa before and after RTFOT. Overall, the modified crepe rubber asphalt can improve the performance of the asphalt in terms of durability. Simultaneously, the antioxidant TMQ works very well in increasing the resistance of bitumen to aging in the conditions of short-term aging and long-term aging.

18 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Nasruddin Nasruddin NasruddinNasruddin Nasruddin Nasruddin
Nasruddin Nasruddin Nasruddin
WSWahyu Bahari Setianto
Wahyu Bahari Setianto
Heryoki YohanesHeryoki Yohanes
Heryoki Yohanes
GAGigih Atmaji
Gigih Atmaji
LLLanjar Lanjar
Lanjar Lanjar
BIBahruddin Ibrahim
Bahruddin Ibrahim
Vulcanization is an important step in the manufacture of solid tires in which the crosslinking process occurs. In vulcanization, the materials commonly used as activators and coactivators are ZnO and stearic acid, respectively. In this research, ZnO and stearic acid were replaced with zinc stearate to improve the characteristics of vulcanized rubber. Zinc stearate was applied in four formulas with a composition of 5 to 9 phr. A formula that is often used in the rubber industry was used as a comparison, and ZnO and stearic acid of 5 phr and 2.5 phr, respectively, were applied. The rubber compound for solid tire production was developed using an open mill at a compounding temperature of 45 °C ± 5 °C. The vulcanization process of developing the rubber compound into vulcanized rubber was carried out at 150 °C for 20 min. Rubber compound test results showed that the use of zinc stearate at a ratio of 8 phr accelerated the curing time (t90) between 58.3% and 69%, the scorch time (ts2) between 22.4% and 95.5%, and the torque delta (Δs) between 17.67 and 24.21 kg-cm. In addition, the vulcanized rubber mechanical properties test results for the compression set parameter increased between 28.6% and 57.1%. Scan results with SEM–EDS showed that using ZS could improve the homogeneous distribution of the material in the vulcanized matrix of solid tire rubber.

13 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BIBahruddin Ibrahim
Bahruddin Ibrahim
Zuchra HelwaniZuchra Helwani
Zuchra Helwani
AWArya Wiranata
Arya Wiranata
IFIvan Fadhillah
Ivan Fadhillah
JMJoni Miharyono
Joni Miharyono
Nasruddin Nasruddin NasruddinNasruddin Nasruddin Nasruddin
Nasruddin Nasruddin Nasruddin
Infrastructure developments in recent decades have led to increasing demand for high-performance paints for construction and decorative purposes. Emulsion paint is water-based paint that is commonly used for coating the internal and external surfaces of a building. The quality and performance of this emulsion paint are highly dependent on its constituent components, such as binders, pigment, solvents, and additives. Emulsion paints initially used conventional formaldehyde-based binders and were, for some reason, prohibited from being used in paints due to health and environmental issues. The development of bio-based paints with natural rubber latex (NRL) has the potential to be developed as an emulsion paint binder. The results showed that NRL grafting of styrene monomer or MMA showed much better resistance to wet scrub and abrasion than PVAc at a monomer concentration of 20%, for styrene, and 30%, for MMA, with washability values reaching each of 11 and 12 cycles at 4% binder concentration. The NgSt20-4 and NgMMA30-4 binders’ abilities to overcome wet scrub and abrasion increased with increasing paint binder concentrations, reaching 22 and 23 cycles at 10% binder concentration. Overall, the combination of NRL grafted with MMA monomer and 30% PVAc showed better performance and could compete with commercial binders such as PVAc. Adding methyl methacrylate monomer increases the adhesion and cohesion properties of the binder and increases the binder’s resistance to scrubbing and wet abrasion. However, the combination of NRL grafted MMA and 30% PVAc showed the same effectiveness as NRL grafted MMA without PVAc, with more economical production costs.

29 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BIBahruddin Ibrahim
Bahruddin Ibrahim
Zuchra HelwaniZuchra Helwani
Zuchra Helwani
IFIvan Fadhillah
Ivan Fadhillah
AWArya Wiranata
Arya Wiranata
JMJoni Miharyono
Joni Miharyono
The direct use of natural rubber latex (NRL) as a binder for emulsion paints did not produce emulsion paints with good opacity, washability resistance, and regulated touch drying time, even when mixed with polyvinyl acetate (PVAc). This study aimed to study the properties of opacity (hiding power), washability resistance, and set drying touch time of emulsion paint with a binder added from a mixture of modified natural rubber latex (NRL) and PVAc. NRL modifications included UV photodepolymerization with TiO2 catalyst and grafting copolymerization of methyl methacrylate and styrene (NRL-g-(MMA-co-St)). NRL was mixed with PVAC at ratios of 0/100; 15/85; 25/75; 35/65; 50/50; 100/0% w/w before being used as a binder for emulsion paint. Emulsion paint samples had different binder contents, namely 2, 4, 6, and 8% w/w. Tests on paint samples included opacity using a UV-Vis spectrophotometer (EASYSPEC safas Monaco), washability using the Digital BGD 526 Wet Abrasion Scrub Tester, and drying time set using the ASTM STP500 procedure. The results showed that the opacity (hiding power), washability resistance, and set drying touch time met the emulsion paint standards for all binder levels, except the 100% w/w modified NRL composition. The higher level of NRL in the binder causes these properties to decrease and become unstable. The best opacity (hidden power), washing resistance, and drying touch time were obtained on modified NRL with a concentration of 15% w/w. The binder content in the paint was around 4% w/w, with an opacity of about 1.78% abs, washing resistance of 12 times, and the set drying touch time to 80 min.

10 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BIBahruddin Ibrahim
Bahruddin Ibrahim
AWArya Wiranata
Arya Wiranata
IZIda Zahrina
Ida Zahrina
LSLeo Sentosa
Leo Sentosa
Nasruddin Nasruddin NasruddinNasruddin Nasruddin Nasruddin
Nasruddin Nasruddin Nasruddin
YMYuswan Muharam
Yuswan Muharam
Overloading and climate change are often problems in pavement structures. For this reason, hard asphalt binders have high softening points, are elastic, and have good adhesion, which is needed to improve pavement performance. Asphalt binder performance can be enhanced by adding additives such as natural rubber or natural-rubber-modified asphalt. However, natural-rubber-modified asphalt shows poor storage stability problems. This is due to differences in density and viscosity between the constituent components of natural-rubber-modified asphalt. This study examines the phase separation mechanism in technically specified natural rubber (TSNR) modified asphalt. Prediction of the optimum storage length of modified asphalt before phase separation occurs, using a combined incompressible Navier–Stokes and phase field model and carried out with COMSOL Multiphysics software version 5.5. Experimental validation was conducted at TSNR levels of 8, 10, and 12% at 160 °C for 48 h, with and without sulfur. The simulation showed that the asphalt modified with TSNR experienced phase separation after 12 h of storage at 160 °C under conditions without stirring. This aligns with the experimental results, which showed phase separation at 160 °C after 48 h. Adding sulfur additives did not have much effect on improving storage stability. The combined incompressible Navier–Stokes and phase field model accurately describes the phase separation in TSNR-modified asphalt. The results of this research recommend that the industry store natural-rubber-modified asphalt in a constantly stirred condition to prevent phase separation of modified asphalt. In addition, the results of this research help the industry predict or increase the homogeneity of polymer-modified asphalt production and save time and costs.

26 November 2021 in Journal of Bioprocess, Chemical and Environmental Engineering Science
Verified
Journal Article
Closed access
PDF file
AWArya Wiranata
Arya Wiranata
The development of road infrastructure in Indonesia is very rapid to keep pace with the growth of vehicles. However, the structure of road pavements in Indonesia is not optimal and causes various problems due to overload and Indonesia's climate. Therefore, it is necessary to increase the performance of asphalt binders with additives such as natural rubber or better known as natural rubber modified asphalt. This study examines the effect of natural rubber content (crumb rubber standard Indonesian rubber 20), sulfur additive content, storage temperature, and storage time on the phase stability of natural rubber modified asphalt. Making crumb rubber modified asphalt samples begins with the mastication of crumb rubber in an open mill. Next, crumb rubber was melted at 200°C and mixed in asphalt with 8, 10, and 12% levels. The last stage is to test the stability of modified asphalt storage at a temperature of 160°C for 48 hours. The results showed that modified asphalt with various levels of rubber experienced storage stability problems after 48 hours. The addition of sulfur additives did not significantly affect storage stability. The optimum addition of natural rubber at 10% crumb rubber content with the difference in softening point (Tbottom – Ttop) reached 11.6°C.