Matteo Pacher

Matteo Pacher

Auto-generated profile, based on publicly available information

Matteo Pacher

Adige SpA, BLM Group 3 , Via per Barco 11, Levico Terme 38056

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
LMLuca Mazzoleni
Luca Mazzoleni
ADAli Gökhan Demir
Ali Gökhan Demir
LCLeonardo Caprio
Leonardo Caprio
MPMatteo Pacher
Matteo Pacher
BPBarbara Previtali
Barbara Previtali
Melt pool monitoring in selective laser melting (SLM) is a key challenge to enhance the understanding of the basic process physics as well as the in-situ identification of drifts. The main issues are related to the molten pool’s fast dynamics and small spatial extent, which require high performance monitoring systems in terms of temporal and spatial resolution, often resulting in unmanageable data rates. Furthermore, the broadband thermal emission from the process can be viewed in different spectral ranges depending on the sensor and optical system employed. Accordingly, a wide range of sensing configurations is possible. The choice of monitoring parameters is crucial to achieve a solution capable of describing process dynamics with industrial applicability in terms of data transport and analysis. This work discusses the design of a coaxial monitoring module to assess melt pool dynamics in SLM using temporal and spatial cues related to the process physics. Restrictions regarding data management were considered to ensure a future inline process control. The system was tested with an external illuminator to reveal the actual melt pool geometry employing an acquisition rate of 1200 fps, 4.3mm x 4.3mm field of view and 14 μm/pixel spatial resolution. The process emission in visible (640 nm) and near-infrared regions (850-1000 nm) was also acquired and the band choice discussed. The proposed solution captured successfully the melting conditions from both a spatial and temporal viewpoint. The monitoring system depicted the melt pool shape variations when processing different geometries using both modulated and continuous wave laser emission.

1 May 2019 in Optics & Laser Technology
Verified
Journal Article
Closed access
ADAli Gökhan Demir
Ali Gökhan Demir
LMLuca Mazzoleni
Luca Mazzoleni
LCLeonardo Caprio
Leonardo Caprio
MPMatteo Pacher
Matteo Pacher
BPBarbara Previtali
Barbara Previtali

1 November 2020 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
MPMatteo Pacher
Matteo Pacher
LFLuca Franceschetti
Luca Franceschetti
SSSilvia Strada
Silvia Strada
MTMara Tanelli
Mara Tanelli
SSSergio M. Savaresi
Sergio M. Savaresi
BPBarbara Previtali
Barbara Previtali
Laser cutting of metals has become the reference manufacturing technology in sheet metal working thanks to the flexibility and the increased productivity it offers when compared with other competitive technologies. Considering, in particular, the fusion-cutting mode, i.e., when nitrogen is used as an assisting gas, different aspects contribute to the process quality among which dross attachment plays the most important role. To cope with the related time-dependent deterioration of the process quality and to obtain an online adaptation of the process parameters for different working conditions, a closed-loop dross regulation system is needed. To realize it, a reliable, continuous, and accurate estimation of the dross is mandatory. This work focuses on this challenging problem, presenting and comparing different approaches to estimate the dross attachment based on the process emission collected by a coaxial camera. Specifically, a method which relies on the accurate analysis of the process emissions for determining an effective classification method is compared with a deep-learning approach based on convolutional neural networks. The obtained results, validated in real experimental conditions, confirm the possibility to accurately estimate the presence of significant dross attachment in real-time and open the way to the design of a closed-loop control algorithm for the real-time regulation of the dross attachment formation and consequently of the process quality.

16 April 2019 in Journal of Laser Applications
Verified
Journal Article
Open access
PDF file
MPMatteo Pacher
Matteo Pacher
LMLuca Mazzoleni
Luca Mazzoleni
LCLeonardo Caprio
Leonardo Caprio
ADAli Gökhan Demir
Ali Gökhan Demir
BPBarbara Previtali
Barbara Previtali
Coaxial imaging of melt pool dynamics provides several advantages over other monitoring methods in selective laser melting (SLM). The ability to track the processing zone ensures the possibility to observe defect formation dynamics mainly related to melting and solidification. Commonly, the melt pool dynamics are observed by means of process emission. In process emission images, geometrical information of the melt pool is not directly available and their extraction would require the use of a calibrated sensor in order to measure the temperature levels; as a consequence, commonly an arbitrary threshold is applied to the image. The use of external illumination for monitoring purposes allows for suppressing the process emission and observing the melt pool geometry by means of the reflected light. On the other hand, the obtained images show lower contrast and can be difficult to process by means of image processing algorithms. Accordingly, this work proposes the complementary use of external illumination to calibrate the melt pool geometry. Afterward, the process emission and melt pool dynamics in SLM are characterized. For the purpose, an open SLM platform with an in-house designed coaxial monitoring module is used. Images with external illumination were used to estimate the melt pool size for AISI 316L stainless steel. The information was used to set a threshold value for determining the melt pool size observed at the near-infrared emission band. The proposed strategy proved promising for real time monitoring and control applications and can represent a feasible solution for industrial systems.

5 November 2018 in JOM
Verified
Journal Article
Closed access
PDF file
LML. Mazzoleni
L. Mazzoleni
LCLeonardo Caprio
Leonardo Caprio
MPM. Pacher
M. Pacher
ADAli Gökhan Demir
Ali Gökhan Demir
BPBarbara Previtali
Barbara Previtali

21 September 2018 in Electronics
Verified
Journal Article
Open access
PDF file
MAMarco Andreetto
Marco Andreetto
MPMatteo Pacher
Matteo Pacher
David MaciiDavid Macii
David Macii
LPLuigi Palopoli
Luigi Palopoli
DFDaniele Fontanelli
Daniele Fontanelli
This paper proposes a distributed target tracking solution using a team of Unmanned Aerial Vehicles (UAVs) equipped with low-cost visual sensors capable of measuring targets bearing information only. The team of UAVs moves along circular orbits and uses consensus–based distributed Kalman Filtering to identify the position of the target. We show that the centre of the orbit eventually converges to the target position using theoretical arguments and extensive simulation data. By using the same approach, we can solve the rendezvous problem: the team first scans an area in search of a target; as soon as one of the UAVs spots, the other components converge on the target position.