1 July 2016 in Journal of Micro/Nanolithography, MEMS, and MOEMS
PBPatricia Pimenta Barros
+5
Overcoming the optical limitations of 193-nm immersion lithography can be achieved using directed self-assembly (DSA) of block-copolymers (BCPs) as a low-cost and versatile complementary technique. The goal of this paper is to investigate the potential of DSA to address line and space (L/S) high-resolution patterning by performing the density multiplication of lines with the graphoepitaxy approach. As surface affinity is a key parameter in self-assembly, three variations, or “flavors,” of DSA template affinity are investigated regarding several success criteria such as morphology control or defectivity. More precisely, both the methodology to register DSA defects and the impact of process parameters on defectivity are detailed. Using the 300-mm pilot line available in LETI and Arkema’s advanced materials, we investigate process optimization of DSA line/space patterning of a 38-nm period lamellar PS-b-PMMA BCP (L38). Our integration scheme is based on BCP self-assembly inside organic hard mask guiding patterns obtained using 193i-nm lithography. Defect analysis coupled with the fine tuning of process parameters (annealing, brush material) provided the optimum conditions for the L38 self-assembly. Using such conditions, DSA using the three affinity flavors is investigated by means of SEM top-view and cross-section review. Lithographic performances of one selected flavor are then evaluated with the comparison of process windows function of either commensurability, morphology, or roughness. This work is meant as a guideline for the graphoepitaxy optimization of materials and process parameters on a 300-mm platform.
15 April 2024 in Journal of Open Source Software
Fitspy is a dedicated tool to fit spectra in python. Spectrum decomposition (also known as fitting) is the choice of a linear combination of peak models to best represent an experimental spectrum. Fitspy currently has implementations for Gaussian, Lorentzian, related asymmetric functions and the Pseudovoigt as peak models. User-defined models can also be added. For the fitting, the model parameters can be subject to bounds and constraints. From a practical point of view, the Fitspy GUI (see Figure 1) is designed to be as simple and intuitive to use as possible.
17 May 2024 in Journal of Applied Physics
Switching Spectroscopy Piezoresponse Force Microscopy (SSPFM) stands out as a powerful method for probing ferroelectric properties within materials subjected to incremental polarization induced by an external electric field. However, the dense data processing linked to this technique is a critical factor influencing the quality of obtained results. Furthermore, meticulous exploration of various artifacts, such as electrostatics, which may considerably influence the signal, is a key factor in obtaining quantitative results. In this paper, we present a global methodology for SSPFM data processing, accessible in open-source with a user-friendly Python application called PySSPFM. A ferroelectric thin film sample of potassium sodium niobate has been probed to illustrate the different aspects of our methodology. Our approach enables the reconstruction of hysteresis nano-loops by determining the PR as a function of applied electric field. These hysteresis loops are then fitted to extract characteristic parameters that serve as measures of the ferroelectric properties of the sample. Various artifact decorrelation methods are employed to enhance measurement accuracy, and additional material properties can be assessed. Performing this procedure on a grid of points across the surface of the sample enables the creation of spatial maps. Furthermore, different techniques have been proposed to facilitate post-treatment analysis, incorporating algorithms for machine learning (K-means), phase separation, and mapping cross correlation, among others. Additionally, PySSPFM enables a more in-depth investigation of the material by studying the nanomechanical properties during poling, through the measurement of the resonance properties of the cantilever–tip–sample surface system.
23 September 2024 in Journal of Open Source Software
Three-dimensional reconstruction from 2D image stacks is a crucial technique in various scientific domains. For instance, acquisition techniques like Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) leverage this approach to visualize complex structures at the nanoscale. However, creating a "clean" 3D stack often requires image corrections to remove artifacts and inconsistencies, particularly for volume segmentation, a crucial process for 3D quantitative data analysis. Here we present PyStack3D, a Python open-source library, that aims at performing several image 'cleaning' tasks (Figure 1) in the most integrated and efficient manner possible.
16 April 2026 in Physica Status Solidi (a)
The local control of mechanical strain and composition in ultra‐thin materials is a challenge for the semiconductor industry. In the production line, these controls require nondestructive, low‐latency, and high accuracy techniques. This article proposes the use of Raman spectroscopy to monitor the structure of ultra‐thin semiconducting materials, with an accuracy of in terms of strain. The Raman signal being however inherently weak, the extraction of strain and composition in the layer of interest may be in certain cases delicate. To predict the enhancement of Raman intensities in a given multilayered stack, we revisited already known interference effects, the so‐called interference‐enhanced Raman spectroscopy mechanism. We developed an open‐access simulation tool, working for stacks featuring as many layers as required: https://github.com/CEA‐MetroCarac/raman_ampli . We validated this modeling tool by growing epitaxial silicon‐germanium (SiGe), a material present in a wide range of microelectronic devices. The SiGe layers were beveled at wafer scale using complementary metal‐oxide‐semiconductor processes. We successfully highlighted the enhancement of thin SiGe on Insulator, especially below . This stack‐dependent SiGe amplification offers promising perspectives for the anticipation of the best laser source (metrology) and the most relevant structures (process) while remaining dependent on product specifications.