A new family of single-stage super Class-AB operational transconductance amplifiers (OTAs) suitable for low-voltage operation and low power consumption is presented. Three novel topologies are proposed featuring simplicity and compactness. They are based on the combination of adaptive biasing techniques for the differential input stage and nonlinear current mirrors for the active load that provide additional dynamic current boosting. The OTAs have been fabricated in a standard 0.5-mum CMOS process. Experimental results show a greatly improved slew rate by factors 30-60 and gain-bandwidth product by factors 11.5-17 when compared to a classical Class-A OTA. The circuits are operated at plusmn1-V supply voltage with only 10 muA of bias current
This work presents the design, development and implementation of a smart sensor to monitor the respiratory rate. This sensor is aimed at overcoming the drawbacks of other systems currently available in market, namely, devices that are costly, uncomfortable, difficult-to-install, provide low detection sensitivity, and little-to-null patient-to-patient calibration. The device is based on capacitive sensing by means of an LC oscillator. Experimental results show that the sensor meets the necessary requirements, making feasible the proposed monitoring system with the technology used.
A high-performance rail-to-rail sample and hold circuit is presented. It is based on a class AB fully differential rail-to-rail differential difference amplifier. Experimental results of a test chip in 0.5 µm CMOS technology show that it has SFDR=69.5 dB with ±1.25 V supplies, 2 MHz clock and 2Vpp, 200 kHz input signals.
This paper presents a new tunable pseudo-differential transconductor topology. A compact feedback loop able to operate with low supply voltage is employed that holds the input transistors in triode region and provides high output resistance. This control loop allows keeping high linearity in a wide range of transconductance. The circuit has been fabricated in a 0.5 μm CMOS technology with a power supply of 1.8 V. The transconductance gain is tunable from 15 to 165 μA/V with a measured total harmonic distortion of -67 dB at 1 MHz for an input voltage of 1 Vpp. The circuit maintains the linearity at higher frequencies with a third-order intermodulation below -55 dB at 10 MHz.