In this paper, a basic cell for low-power and/or low-voltage operation is identified. It is evidenced how different versions of this cell, coined as "flipped voltage follower (FVF)" have been used in the past for many applications. A detailed classification of basic topologies derived from the FVF is given. In addition, a comprehensive list of recently proposed low-voltage/low-power CMOS circuits based on the FVF is given. Although the paper has a tutorial taste, some new applications of the FVF are also presented and supported by a set of simulated and experimental results. Finally, a design example showing the application of the FVF to build systems based on translinear loops is described which shows the potential of this cell for the design of high-performance low-power/low-voltage analog and mixed-signal circuits.

A simple and efficient low-voltage two-stage operational amplifier with Class-AB output stage is introduced. It has a large effective output current boosting factor (/spl sim/50) and close to a factor 2 bandwidth enhancement. This is achieved at the expense of minimum increase in circuit complexity and no additional static power dissipation. Experimental verification of the characteristics of the proposed circuit is provided.

This paper presents the design of a wireless sensor network particularly designed for remote monitoring and control of industrial parameters. The article describes the network components, protocol and sensor deployment, aimed to accomplish industrial constraint and to assure reliability and low power consumption. A particular case of study is presented. The system consists of a base station, gas sensing nodes, a tree-based routing scheme for the wireless sensor nodes and a real-time monitoring application that operates from a remote computer and a mobile phone. The system assures that the industrial safety quality and the measurement and monitoring system achieves an efficient industrial monitoring operations. The robustness of the developed system and the security in the communications have been guaranteed both in hardware and software level. The system is flexible and can be adapted to different environments. The testing of the system confirms the feasibility of the proposed implementation and validates the functional requirements of the developed devices, the networking solution and the power consumption management.

A new family of single-stage super Class-AB operational transconductance amplifiers (OTAs) suitable for low-voltage operation and low power consumption is presented. Three novel topologies are proposed featuring simplicity and compactness. They are based on the combination of adaptive biasing techniques for the differential input stage and nonlinear current mirrors for the active load that provide additional dynamic current boosting. The OTAs have been fabricated in a standard 0.5-mum CMOS process. Experimental results show a greatly improved slew rate by factors 30-60 and gain-bandwidth product by factors 11.5-17 when compared to a classical Class-A OTA. The circuits are operated at plusmn1-V supply voltage with only 10 muA of bias current

A new operational transconductance amplifier and capacitor based sinusoidal voltage controlled oscillator is presented. The transconductor uses two cross-coupled class-AB pseudo-differential pairs biased by a flipped voltage follower, and it exhibits a wide transconductance range with low power consumption and high linearity. The oscillator has been fabricated in a standard 0.8-/spl mu/m CMOS process. Experimental results show a frequency tuning range from 1 to 25 MHz. The amplitude is controlled by the transconductor nonlinear characteristic. The circuit is operated at 2-V supply voltage with only 1.58 mW of maximum quiescent power consumption.

This article discusses a new experimental way to measure the I-V characteristic curve of photovoltaic (PV) generators based on DC-DC converters. The obtained results show that the classical buck and boost converters are not capable of reproducing the whole I-V curve of PV generators and that the single-ended primary inductance converter (SEPIC) is optimal for this application. We propose a method based on SEPIC converters in parallel connection, operating in an interleaved mode. This method gives advantages with respect to the use of conventional methods.