Jian Zhang

Jian Zhang

Auto-generated profile, based on publicly available information

Jian Zhang

School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 June 2022 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
PYPengcheng Yin
Pengcheng Yin
JXJ. Xu
J. Xu
RYRuichao Yang
Ruichao Yang
JLJ. J. Luo
J. J. Luo
JZJ. Zhang
J. Zhang
YWY. Y. Wei
Y. Y. Wei
The electron optical systems (EOS) play a vital role in vacuum electron devices (VED). This letter reported the design and experiments of the sheet EOS for the 1.03 THz traveling wave tube (TWT). A high-current-density sheet electron beam (SEB) electron gun generating up to 20.3-mA at 22.4-kV is designed, based on the requirements of this TWT. Due to the very high operating frequency, more than 1 THz, the miniature tunnel and beam waist with a dimension of 0.05 mm * 0.148 mm and 0.025 mm * 0.114 mm, respectively, will lead to a very high beam current density (906.9 A/cm 2 ). Therefore, a 1-Telsa uniform magnetic system is designed, to ensure such a high-current-density SEB passes through the 27-mm tunnel. Finally, the primary experiments indicate that 7.56-mA current reaches the collector.

1 August 2022 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
JZJian Zhang
Jian Zhang
XJXuebing Jiang
Xuebing Jiang
JXJin Xu
Jin Xu
LYLingna Yue
Lingna Yue
HYHairong Yin
Hairong Yin
YWY. Y. Wei
Y. Y. Wei
In this letter, the modified flat-roofed sine waveguide slow-wave structure (FRSWG-SWS) is proposed for the wideband high-power sub-terahertz traveling-wave tube (sub-THz TWT), which possesses the advantages of wide operating bandwidth, low loss, minimal reflection, and ease of fabrication. The simulation results demonstrate that the transmission parameter is more than $-$ 5.0 dB in the frequency range between 210 and 250 GHz. The beam–wave interaction results indicate that the modified FRSWG can provide over 50 W of output power and 30 dB of gain from 205 to 250 GHz with sheet electron beam with a voltage of 20.8 kV and a current of 150 mA. Finally, we use high-speed milling to fabricate the modified FRSWG by the nano-Computer Numerical Control (CNC) technology. The cold test results demonstrate that the modified FRSWG has low loss and good reflection characteristics.

27 November 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JZJian Zhang
Jian Zhang
JXJ. Xu
J. Xu
JCJinchi Cai
Jinchi Cai
PYPengcheng Yin
Pengcheng Yin
HYHairong Yin
Hairong Yin
YWY. Y. Wei
Y. Y. Wei
To improve the performance of efficiency bandwidth product (EBP) and power capacity for G-band continuous-wave traveling-wave tube (CW TWT), a novel staggered U-shaped groove sine waveguide slow-wave structure (SUGSWG SWS) is proposed in this article. The theoretical analysis of high-frequency and beam–wave interaction characteristics indicates that the SUGSWG TWT has low insertion/reflection loss, broadband (3-dB power bandwidth of over 19 GHz), and high maximum output power (over 66 W), of which the EBP could reach whopping 103% $\cdot$ GHz (about three times the state of art). In the merit of its special geometry, the power capacity of this novel SWS is also about 1.6 times its existing peers. A prototype of a two-section SUGSWG TWT is designed, fabricated, and experimented for verifications. The hot test demonstrated that the peak power of 56 W, the 3-dB power bandwidth of 16 GHz, and the EBP of 75.4% $\cdot$ GHz were achieved, with the transmission rate practically tuned around 93%. Those measurement results are consistent with the theoretical predictions under the same transmission conditions. Those studies validate the remarkable potential of our proposed novel slow wave structure (SWS) in TWTs for THz applications.

6 February 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JLJinjing Luo
Jinjing Luo
JXJin Xu
Jin Xu
PYPengcheng Yin
Pengcheng Yin
JZJian Zhang
Jian Zhang
DJDongdong Jia
Dongdong Jia
YWY. Y. Wei
Y. Y. Wei
Folded waveguide (FWG) traveling wave tube (TWT) is an attractive choice for a high-power amplifier. This article proposes a novel slow wave structure (SWS) called sine-shaped FWG (S-FWG), which is derived from conventional FWG. With the feature of transforming the arc-shaped segment of the traditional FWG into the sinusoidal waveguide, the proposed structure could be quickly optimized by modifying the amplitude of the two sine curves, and it has an ability to produce a greater interaction impedance compared to the traditional FWG SWS with the same frequency band, which, under the same operating conditions, is expected to result in a higher output power. Using CST Microwave Studio, the high-frequency properties and beam–wave interaction were simulated. Simulation results indicate that the S-FWG TWT reaches a maximum output power of 16.82 W and a gain of 32.25 dB at 330 GHz with an operating voltage of 19.4 kV, a beam current of 30 mA, and an input power of 10 mW. The S-FWG SWS should therefore be regarded as a promising SWS for the high-power terahertz (THz) traveling wave amplifier.

1 September 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JLJinjing Luo
Jinjing Luo
JXJin Xu
Jin Xu
PYPengcheng Yin
Pengcheng Yin
JZJian Zhang
Jian Zhang
DJDongdong Jia
Dongdong Jia
YWY. Y. Wei
Y. Y. Wei
The sine waveguide slow wave structure (SWG SWS), which has the advantages of being simple to fabricate, high transmission, low reflection, and insertion loss, has been considered as a potential construction in the terahertz region. Nevertheless, the existing ideal SWG SWS could not be fabricated by nano-computer numerical control (nano-CNC) machining. A modified slotted SWG (MS-SWG) SWS that evolved from the ideal slotted SWG (IS-SWG) SWS is suggested in this study. The cold-test results prove the feasibility of the processing scheme and the S $_{\mathbf{\text{11}}}$ $<$ $-$ 15 dB ranges from 330 to 390 GHz. The particle-in-cell (PIC) results reveal that the presented SWS can produce output power of 17.4 W at 340 GHz with gain of 33.9 dB. The 3-dB bandwidth is 11 GHz from 334 to 345 GHz. The simulation findings reveal a flow rate of 100% for the matched electron-optical system (EOS), which includes an electron gun, a periodic permanent magnet (PPM), and a single-stage depressed collector.

23 August 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
ZSZ. X. Su
Z. X. Su
JCJ. C. Cai
J. C. Cai
PYPengcheng Yin
Pengcheng Yin
DCD. C. Chen
D. C. Chen
JZJ. Zhang
J. Zhang
YWY. Y. Wei
Y. Y. Wei
During the test of an S-band multibeam klystron (MBK) resonant cavity, an interesting experimental phenomenon was observed: the measured ohmic quality factor ( Q 0 ) of the cavity was surprisingly low (around 200, design value of 5090). This prompted an in-depth investigation, revealing that the low Q 0 was due to the presence of a small gap on the perimeter of the resonant cavity, which resulted from an inadvertent mechanical design. The topology of this assembly gap was similar to an extremely thin coaxial line. To further investigate the impact of such assembly gap, theoretical and numerical models were developed to quantitatively analyze the effect of concentric/eccentric assembly gap on the cavity Q 0 , field asymmetry, the shunt impedance, mode competition, etc. The analysis indicates that the primary factor affecting Q 0 is the length of the small gap. The concentricity and width mainly influence the symmetry and shunt impedance, respectively. The analysis showed good agreement with the experimental results. Based on the above findings, a new approach was proposed to conveniently reduce the Q 0 of the resonant cavity via employing an appropriately long, relatively narrow gap (1/1000 of its radii, to ensure concentricity even in the worst scenario), thereby facilitating the development of broadband klystrons.