Yuyu Wahyu

Yuyu Wahyu

Auto-generated profile, based on publicly available information

Yuyu Wahyu

Research Center for Telecommunication, National Research and Innovation Agency (BRIN), Bandung, Indonesia

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2023 in IEEE Access
Verified
Journal Article
Open access
DADian Widi Astuti
Dian Widi Astuti
YWYuyu Wahyu
Yuyu Wahyu
FZFitri Yuli Zulkifli
Fitri Yuli Zulkifli
EREko Rahardjo
Eko Rahardjo
A substrate-integrated waveguide (SIW) antenna is an implementation of a waveguide antenna in a microstrip antenna. The microstrip antenna, as a low-profile antenna, suffers from narrow impedance bandwidth. This paper proposes a novel bandwidth enhancement method for solving a narrow impedance bandwidth. Bandwidth enhancement was achieved by using quad-resonant frequencies. The quad-resonant frequencies are resulted from the hybrid half-mode substrate-integrated waveguide (HMSIW) cavities between the inner and outer cavities. The inner HMSIW cavity has a half-pentagon ring slot that disturbs the TE $_{\mathrm {101-inner}}$ , TE $_{\mathrm {102-inner}}$ , TE $_{\mathrm {202-inner}}$ , and TE $_{\mathrm {103-inner}}$ modes, whereas the outer HMSIW cavity consists of two outer quarter-mode substrate-integrated waveguide (QMSIW) cavities. The outer HMSIW cavity generated the TE $_{\mathrm {102-outer}}$ and TE $_{\mathrm {202-outer}}$ modes. The hybrid cavities were fed simultaneously using a port with a quarter-wavelength feed transmission line. The hybrid HMSIW cavities generated resonant frequencies that were close to each other. Additionally, this method was applied to the X-band frequency with a low-profile substrate. The simulated impedance bandwidth and peak realized gain was 33.86% ( $8.98-12.64$ GHz) and 7.97 dBi, while the measured impedance bandwidth and peak gain were 31.83% (9.14 – 12.6 GHz) and 7.62 dBi, respectively. Strong agreement was observed between the measurement and simulation results.

7 May 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
TFTeguh Firmansyah
Teguh Firmansyah
SPSupriyanto Praptodiyono
Supriyanto Praptodiyono
IMImamul Muttakin
Imamul Muttakin
MWMuh. Wildan
Muh. Wildan
DCDwi Astuti Cahyasiwi
Dwi Astuti Cahyasiwi
JKJun Kondoh
Jun Kondoh
Multifunctional, integrated, and independent microwave sensor (MS) with dual-band bandpass filter (BPF) for solid material characterization and radio frequency communication is presented. The proposed device is developed using a multi-coupled line resonator structure to integrate both multiplexing (MUX) and demultiplexing functionalities (DEMUX). On the input side, the circuit behaves like a MUX, divided into three main sections: Path I, Path II, and the MS structure. Path I and Path II sections feature a pair of coupled-line configurations for the lower-band BPF (LB-BPF) with ladder-based resonators and upper-band BPF (UB-BPF) with hairpin-based resonators, respectively. Additionally, the MS structure employs a ring resonator configuration, positioned between Path I and Path II. On the output side, the circuit behaves like a DEMUX, combining back into a single port. As a result, the dual-band BPF has frequency centers of 1.80 GHz (LB-BPF) and 2.56 GHz (UB-BPF) suitable for 4G and 5G applications, respectively. Moreover, the dual-band BPF exhibits independent characteristics, with easily controllable frequency centers and fractional bandwidths. Furthermore, for the MS function, the frequency of maximum transmission (MT) and the transmission zero (TZ) were utilized for MS evaluation. Solid materials with low permittivity (ε r ) ranging from 1 to 9.5 were used as samples. The MS achieved a normalized sensitivity of 2.60% and 1.98% for MT and TZ, respectively. Interestingly, the integration of LB-BPF, UB-BPF, and MS shows independent performances and does not influence each other. This behavior is linked to distinctive electric field locations. Finally, compared to prior structures, the proposed design offers several advantages, including: 1) multifunctional capability by combining a dual-band MS and dual-band BPF, 2) independent and simultaneous characteristics, and 3) full integration with a simple structure based on 2-port single-layered substrate design.

1 December 2025 in Indonesian Journal of Chemistry
Verified
Journal Article
Open access
HHHusain Husain
Husain Husain
IRIrwan Ramli
Irwan Ramli
WAWisnu Adi
Wisnu Adi
YYYunasfi Yunasfi
Yunasfi Yunasfi
MMMashadi Mashadi
Mashadi Mashadi
ASAgus Susanto
Agus Susanto
This study explores the sustainable synthesis and structural characterization of carbon, graphite, graphene oxide (GO), and reduced graphene oxide (rGO) derived from coconut shells. The objective is to investigate the potential of biomass-based precursors to produce functional carbon materials through controlled chemical treatments. X-ray diffraction patterns of carbon and graphite exhibit broad peaks, indicating low crystallinity and amorphous characteristics, while GO and rGO show dominant peaks at 22° and 23°, corresponding to the (002) plane. Scanning electron microscopy confirms the disordered morphology of carbon and graphite, while high-resolution transmission electron microscopy reveals wrinkled GO sheets and partially restacked rGO layers. Fourier transform infrared spectra identify O−H stretching at ~3442 cm−1 in carbon and C=C stretching at 1630 cm−1 in graphite, along with various oxygen-containing functional groups in GO and rGO. Raman spectroscopy shows a sharp G band at 1580 cm−1 in graphite (ID/IG = 0.840), increased disorder in GO (ID/IG = 0.843), and partial graphitic restoration in rGO (ID/IG = 0.841). These findings confirm the successful transformation of coconut shells into valuable carbon-based materials and highlight their potential for use in sustainable energy and electronic applications.

4 November 2022
Verified
Conference Paper
Closed access
PAPuput Dani Prasetyo Adi
Puput Dani Prasetyo Adi
DHDwi Ekasari Harmadji
Dwi Ekasari Harmadji
YWYuyu Wahyu
Yuyu Wahyu
YSYaya Sulaeman
Yaya Sulaeman
FMFransiska Sisilia Mukti
Fransiska Sisilia Mukti
OEOtto Endarto
Otto Endarto
The GPS Module is one of the essential parameters in the Internet of Things (IoT) and the Microcontroller. A GPS module is a device that can be combined with a microcontroller to be developed for various projects. One of them is the LoRa module capability analysis project, which provides parameters for Receive Signal Strength (RSS), Signal Power (dB), Latitude and Longitude, or the position or location of an object transmitter and receiver. This project discusses the GPS analysis of the U-Blox Neo 6M-0-001 combined with the Graphical User Interface (GUI) software, complete with the parameters shown in the U-Center. The development of this u-center is in combination with Google Maps for data for the latest photos or a more user-friendly display with street, 2D, or 3D forms. By using the GPS Shield module, duinopeak RSSI reaches −118 dBm at a distance of 500 meters with a GPS data reception ratio of 96% Longitude and Latitude. in the next analysis, the GPS Module is placed on the Drone and flown in LoS and NLoS, RSSI and SNR of LoRa can analyze.

20 June 2025 in IEEE Access
Verified
Journal Article
Open access
DKDevy Kuswidiastuti
Devy Kuswidiastuti
LLLeo Ligthart
Leo Ligthart
GHGamantyo Hendrantoro
Gamantyo Hendrantoro
TSTitiek Suryani
Titiek Suryani
PMPrasetiyono Hari Mukti
Prasetiyono Hari Mukti
YWYuyu Wahyu
Yuyu Wahyu
The proposed CC-OFDM-MIMO radar enables the development of software-defined radar by using array antennas to provide multiple high-resolution beams with low peak SLLs. The radar requires no RF phase shifters because the amplitude and phase control for multiple beamforming are provided directly from the waveform generation stage. The multiple beams are transmitted simultaneously and continuously without beams switching that makes the radar has full continuous observations over the wide coverage of -45 to 45 degree. The proposed design of long-range radar with low power transmission can be implemented by transmitting multi-orthogonal CC-OFDM symbols in series, which extends the maximum unambiguous range and improves the Signal-to-Noise of the radar system. The orthogonality of the beams and the symbols obtained by applying orthogonal Golay codes and sub-band frequency scheduling arrangements to avoid interference between beams and between symbols. In this paper, parallel receiver processing works by correlating the received signals with the multiple signal references that are well-known by the transmitters and receivers. The output of the multibeam correlators gives the first estimation of the target profiles in terms of the targets range and its direction. The target direction can be verified furthermore by correlating the spectrum of the received echo signal after delay compensation with the Golay codes which corresponds to a specific beam and specific symbol. With the orthogonal nature of Golay Codes, the receiver can distinguish targets which come from different beams, even though the beams are using the same frequency band. After the target is detected within a specific beam, and at a certain range, Doppler processing can be done by observing the phase variation between the samples of the received signal and the signal references. The coherence processing for Doppler detection can be done over one period of symbol, and the Doppler resolution can be improved by coherence processing over one frame period consisting of 12 orthogonal symbols. Simulation of the receiver processing is done for two targets located in the same beam, in neighboring beams and in co-channel beams. The results show that the radar could distinguish two targets with 60 meters in separation with SLLs as low as -80dB. Additionally, the radar is able to detect moving targets with better resolution because the velocity can be obtained from the phase variation over one symbol duration and over the whole symbol series.

29 January 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
TFTeguh Firmansyah
Teguh Firmansyah
Syah AlamSyah Alam
Syah Alam
SWSlamet Widodo
Slamet Widodo
MIMuhammad Iqbal
Muhammad Iqbal
RARocky Alfanz
Rocky Alfanz
JKJun Kondoh
Jun Kondoh
A microfluidic structure plays a crucial role in supporting liquid sensors. However, modeling a multilayered microfluidic structure faces challenges for permittivity sensor applications, particularly concerning the non-monotonic behavior of multilayered dielectrics. These challenges arise due to the varying characteristics of the electric field (E) direction in dielectrics with low and high permittivity. The existing models exhibit significant deviations from measurement results across a wide permittivity range. To address the issue, this paper proposes a quasi-static conformal approach with exponentially tapered capacitance to minimize deviations caused by nonlinear behavior. This study uses the exponential tapered permittivity ratio to adjust and modify the capacitance value. The proposed model was examined across samples with a wide range of permittivity, spanning from air of 1.0 to water of 80.0. To verify the proposed model, finite element method (FEM) simulations and experimental measurements were conducted. A three-layer configuration was prepared, i.e., glass (εr2 = 7.3) / liquid sample (εr3 = 1.0-80.0) / glass (εr4 = 7.3). The sample was positioned at the middle layer by using a microfluidic channel with a cuboid shape. As a result, the comparison of the quasi-static conformal approach without and with the exponentially tapered capacitance model reveals deviations in the effective permittivity (εr-eff) of 27.7% and 1.3%, in the characteristic impedance (Z0) of 11.1% and 0.8%, and in the total capacitance (CT) of 28.5% and 1.4%, respectively. Subsequently, the proposed sensor structure was fabricated and measured for permittivity sensor application using the resonant frequency shift approach. The measurement results, ranging from the air (εr3 = 1.0) to the water sample (εr3 = 80.0), showed a frequency shift of 425.50 MHz and an average normalized sensitivity (NS) of 0.64%. This study presents a robust and accurate model, offering a practical solution for permittivity sensing. The proposed approach meets the high accuracy and sensitivity demands in diverse industrial and environmental applications. Additionally, the model is recommended for various sectors, including the biomedical industry, medicine, and material quality control.