The paper reports the results of QSPR analysis of several problems of coloration of textiles, including light fastness of azo benzothiazole and indigoid dyes, ionization of hydroxyl groups in mordant dyes forming complexes with polyvalent metal ions and rate reactions of organic substances with OH radical during catalytic oxidizing of pollutants. Multiple linear regression models are built with the use of fragment descriptors. The role of different molecular fragments is discussed emphasizing the mechanism of the phenomena and ways of application in coloration technology.
The study explores the development of stitched reinforced composites using Kevlar woven fabric as the primary reinforcement. The influence of stitching parameters, stitch type, needle type and stitches per cm (SPC) on the mechanical performance of the composites was systematically investigated. Kevlar fabric was stitched using different needle types and SPC values before being mechanically tested for tensile strength, delamination resistance and impact performance. The results demonstrate that composites stitched with a ballpoint needle using a chain stitch at 3.94 SPC exhibited the highest mechanical strength, with tensile strength increasing from 145 MPa (unstitched) to 191.5 MPa (lock stitch) and 240 MPa (chain stitch). Impact resistance improved from 98 kJ/m² (unstitched) to 133 kJ/m² (ballpoint needle, lock stitch), with chain-stitched composites showing even better performance due to the greater load distribution of the sewing thread and reduced fabric damage. Conversely, lock-stitched composites provided superior delamination resistance due to enhanced interlayer gripping. These findings highlight the potential of the developed composite for advanced protective applications, including bulletproof vests and aerospace structures requiring superior impact resistance and structural integrity.
In this study, acetic acid and citric acid were used in place of only acetic acid to color silk fabric using Bemacid Blue N-TF dyes in 2% hues. The dyed sample was assessed using a variety of metrics and methods, including fixation efficiency (%), fastness properties, and K/S value. A sample of citric acid displayed the same color fixation and fastness characteristics. Citric acid significantly reduced the results of the tests conducted on the wastewater from both samples, both in terms of chemical and biological oxygen demand. The significant sustainable approach to acid dyeing is demonstrated by the citric acid dyed sample's comparable wash fastness of 4-5, BOD of 240 mg/L, and COD of 2375 mg/L.