The transition between the dielectric tetragonal and ferroelectric orthorhombic phases in 7%Y doped HfO2 and Hf0.5Zr0.5O2 films with various orientations and film thicknesses was investigated by high-temperature x-ray diffraction. All films demonstrate a different phase transition temperature on heating and cooling with thermal hysteresis with a gap of ΔT. This result clearly shows that the phase transition of the ferroelectric HfO2-based film is first order. The ΔT value of 40–210 °C in HfO2-based films is larger than that of other ferroelectric materials but similar to that of martensitic materials with large lattice deformation. This implies that the ferroelectric phase transition of HfO2-based films involves large lattice deformation. Moreover, we show that ΔT is changed by the size and composition effects. Our results are a step toward elucidating the mechanism of phase transition in ferroelectric HfO2-based films.
19 February 2020 in Japanese Journal of Applied Physics
The thickness- and orientation- dependences of Curie temperature were investigated for (111)-oriented, (100)-oriented and randomly-oriented 0.07YO 1.5 -0.93HfO 2 films using high-temperature X-ray diffraction to study temperature stability of ferroelectric HfO 2 based films. These (111)-, (100)- and randomly-oriented films with various film thickness were prepared at room temperature on (111)YSZ, (100)YSZ and Pt/TiO x /SiO 2 /Si substrates by pulsed laser deposition, respectively, and subsequent 1000 °C annealing to obtain ferroelectric orthorhombic phase. Although (111)-oriented films show that Curie temperature decreases with the decrease in thickness, the temperature was higher than 350 °C in 4.6–110 nm thickness range. (100)-oriented films show no thickness dependence of Curie temperature of 550 °C in 15–86 nm thickness range. Moreover, the Curie temperature of 10 nm thick randomly-oriented films was also 550 °C. These results revealed that the Curie temperature was above 350 °C, which is significantly high for the stable operation of memory application, regardless of the thickness and orientation.
The thickness dependence of the crystal structure in epitaxial films is demonstrated. X-ray diffraction measurements suggest that the crystal phase changes from the monoclinic to the orthorhombic and tetragonal phases sequentially as film thickness decreases in and films. Both films are very thin at the ferroelectric orthorhombic phase , but the films are thicker than the films. In films, the monoclinic phase changes into the tetragonal phase as film thickness decreases. This means that the ferroelectric orthorhombic phase was not observed in the present study. However, ferroelectricity was observed for the present films in the film thickness around the thickness boundary where the tetragonal and monoclinic phases stabilize. We confirmed the field-induced phase transition from the tetragonal to the orthorhombic phase in these films by micro-x-ray diffraction measurement, which suggested that the phase transition takes place due to the small free energy difference between the ferroelectric orthorhombic phase and paraelectric tetragonal phase. Our experimental results agree with theoretical reports of the thickness dependence of the crystal structure in epitaxial films with a surface energy effect.
Electronic conduction pathways in dielectric thin films are explored using automated experiments in scanning probe microscopy (SPM). Here, we use large field of view scanning to identify the position of localized conductive spots and develop an SPM workflow to probe their dynamic behavior at higher spatial resolution as a function of time, voltage, and scanning process in an automated fashion. Using this approach, we observe the variable behaviors of the conductive spots in a 20-nm-thick ferroelectric Hf0.54Zr0.48O2 film, where conductive spots disappear and reappear during continuous scanning. There are also fresh conductive spots that develop during scanning. The automated workflow is universal and can be integrated into a wide range of microscopy techniques, including SPM, electron microscopy, optical microscopy, and chemical imaging.
23 February 2023 in ACS Applied Electronic Materials