1 January 2016 in Express Polymer Letters
Current challenges highlight the need for polymer research using renewable natural sources as a substitute for petroleum-based polymers. The use of polyols obtained from renewable sources combined with the reuse of industrial residues such as lignin is an important agent in this process. Different compositions of polyurethane-type materials were prepared by combining technical Kraft lignin (TKL) with castor oil (CO) or modified castor oil (MCO1 and MCO2) to increase their reactivity towards diphenylmethane diisocyanate (MDI). The results indicate that lignin increases the glass transition temperature, the crosslinking density and improves the ultimate stress especially for those prepared from MCO2 and 30% lignin content from 8.2 MPa (lignin free) to 23.5 MPa. Scanning electron microscopy (SEM) micrographs of rupture surface after uniaxial tensile tests show ductile-to-brittle transition. The results show the possibility to develop polyurethane-type materials, varying technical grade Kraft lignin content, which cover a wide range of mechanical properties (from large elastic/low Young modulus to brittle/high Young modulus polyurethanes)
15 October 2019 in Journal of Applied Physics
In this study, we combine low-energy ion scattering (LEIS) static and sputter depth profiles for characterization of the oxidation kinetics on Zr, Mo, Ru, and Ta films of various thicknesses, followed by exposure to atomic oxygen at room temperature (∼20 °C). A method for nondestructive determination of the oxide growth rate via LEIS static depth profiling (static DP) is presented in detail. This method shows high sensitivity to the oxide thickness formed, and the results are in agreement with those obtained by X-ray reflectometry and sputter depth profiling (sputter DP). Sequential exposures of oxygen isotopes in combination with LEIS sputter DP are applied to elucidate the growth mechanism of the oxide films. The results indicate that the oxidation kinetics at the applied experimental conditions is directly influenced by the metal work function, characterizing a Cabrera-Mott growth type. The maximum thickness of the formed oxide and oxide growth rate are in the order Zr ≈ Ta > Mo > Ru. The combining of analysis by LEIS static DP and isotope tracing sputter DP is decisive in the characterization of oxidation kinetics in the room temperature regime.
1 December 2021 in Materialia
1 August 2016 in Materials Science Forum
In this work we investigated the application of a novel high performance polymer, polybenzoxazine, as a polymeric matrix in Fiber Metal Laminates (FML). This polymer, when applied on the development of FMLs, generated higher mechanical properties in comparison to fiber metal laminates obtained with epoxy. To investigate the mechanical performance of the polybenzoxazine matrix in FMLs, a mechanical behavior comparison was carried out among epoxy matrix laminates - glass fiber reinforced aluminum laminate (GLARE) and carbon fiber reinforced aluminum laminate (CARALL) - and FML constructed with aluminum and carbon fiber reinforced polybenzoxazine. The mechanical properties were characterized by drop weight impact and flexural methods, and the polybenzoxazine curing behavior through differential scanning calorimetry (DSC). Polybenzoxazine FML generated increasing of: 18% of maximum load, 11% of maximum elongation under flexure and 7.5% of impact energy absorption compared to other fiber metal laminates.