1 July 2019 in Waste Management
4 December 2018 in Engineering Journal
31 May 2021 in Matra Pembaruan
Kiprah lembaga penelitian dan pengembangan milik pemerintah sudah ada sejak lama, baik unit yang berada di bawah kementerian atau perguruan tinggi maupun yang independen dalam struktur Lembaga Pemerintah Non Kementerian bidang Riset dan Teknologi (LPNK Ristek). Namun, panjangnya eksistensi LPNK Ristek dinilai tidak sejalan dengan output hasil litbang karena minimnya kontribusi LPNK Ristek dalam melakukan hilirisasi hasil kegiatan penelitian dan pengembangan (litbang) ke para pengguna. Studi ini berupaya memberikan pemahaman mengenai bentuk desain kebijakan yang berangkat dari isu minimnya hilirisasi/komersialisasi hasil litbang di Indonesia dengan kebijakan transfer teknologi yang sudah ada dan mengusulkan alternatif kebijakan baru, yakni Technology Transfer Office (TTO) untuk menggantikan kebijakan yang lama. Pendekatan studi ini adalah kualitatif dengan metode desk research, di mana sumber data yang digunakan diperoleh melalui sumber sekunder dari dokumen tertulis, jurnal ilmiah, buku ilmiah, arsip, kebijakan atau regulasi yang terkait, dan penelusuran dari website lembaga terkait. Sumber data tersebut dipublikasikan dalam rentang waktu tahun 1996 hingga tahun 2020. Hasil dari studi ini menemukan ada tiga hambatan transfer teknologi di lembaga litbang Indonesia yakni minimnya pendanaan, terbatasnya kualitas dan kuantitas SDM, serta struktur kelembagaan yang kaku dan menghambat fungsi transfer teknologi. Studi ini juga merekomendasikan kebijakan TTO sebagai alternatif kebijakan transfer teknologi dengan empat instrumen utamanya yakni (1) dari aktivitas pemerintah yang terlibat, (2) struktur sistem penyampaian baik langsung atau tidak langsung, (3) derajat sentralisasi, dan (4) derajat automisasi dengan mekanisme pendanaan, SDM, dan kelembagaan berupa Badan Layanan Umum (BLU).
1 January 2018 in AIP Conference Proceedings
25 July 2018 in AIP Conference Proceedings
A combination of wet torrefaction and binderless briquetting processes, namely torre-briquetting process, has been developed in Indonesia to treat the mixed municipal solid waste into a solid fuel. A mixture of organic and plastic waste was treated in a 2.5 L reactor using saturated steam in the temperature range of 175 to 225°C. Afterwards, the products were briquetted in varied pressure of 500 to 1000 bar. It was observed that the wet torrefaction process at the temperature of 225°C, residence time of 30 min and sample-to-water ratio of 1:2.5 was able to produce the solid product with heating value of up to 5923 kcal/kg, equivalent to that of bituminous coal. In the briquetting aspect, the briquetted product showed adequate drop test durability of 90% at 1000 bar briquetting pressure. The density of the briquette however, has not reached the standard of 1000 kg/m3, presumably due to the presence of large sized plastic in the briquette. The results suggest that by employing wet torrefaction, the organic fibers in the mixed waste are trapped into the plastic matrix, producing granules which are suitable for briquetting. Therefore, the torre-briquetting process can be a revolutionary solution to treat the MSW without any separation required to produce high caloric solid fuel.
25 July 2018 in AIP Conference Proceedings
Preliminary survey showed that organic waste from the market is about 18.77%, or second largest in the total waste generation. Its management becomes a challenge, because it is not comprised only of organics but also mixed with small amount of plastics; therefore, conventional biological process will not achieve their maximum efficiency. Wet torrefaction is a thermal process in hot water medium, which will dissolve organic materials into water, effectively converting most solids into liquid product. Banana fruit stem and cabbage were chosen as the mixed organic waste representative, and treated in a 2.5 L reactor using saturated steam in the temperature range of 175 to 225 °C before being analyzed for their heating value in solid products as fuel precursors, and their nitrogen, phosphorus and potassium (NPK) contents in liquid products as liquid fertilizer precursors. It was found that for cabbage, the wet torrefaction process at 200 °C and 90 min resulted in 15.59 MJ/kg product heating value with NPK content of 3.43%. For banana fruit bunch stem, the wet torrefaction process at 225 °C and 30 min resulted in 17.64 MJ/kg product heating value with NPK content of 5.13%. It can be concluded that wet torrefaction process can simultaneously produce solid and liquid product as solid fuel and liquid fertilizer, respectively.