Globally, 2.5% of upper limb amputations are transhumeral, and both mechanical and electronic prosthetics are being developed for individuals with this condition. Mechanics often require compensatory movements that can lead to awkward gestures. Electronic types are mainly controlled by superficial electromyography (sEMG). However, in proximal amputations, the residual limb is utilized less frequently in daily activities. Muscle shortening increases with time and results in weakened sEMG readings. Therefore, sEMG-controlled models exhibit a low success rate in executing gestures. The LIBRA NeuroLimb prosthesis is introduced to address this problem. It features three active and four passive degrees of freedom (DOF), offers up to 8 h of operation, and employs a hybrid control system that combines sEMG and electroencephalography (EEG) signal classification. The sEMG and EEG classification models achieve up to 99% and 76% accuracy, respectively, enabling precise real-time control. The prosthesis can perform a grip within as little as 0.3 s, exerting up to 21.26 N of pinch force. Training and validation sessions were conducted with two volunteers. Assessed with the “AM-ULA” test, scores of 222 and 144 demonstrated the prosthesis’s potential to improve the user’s ability to perform daily activities. Future work will prioritize enhancing the mechanical strength, increasing active DOF, and refining real-world usability.
Injury burns are traumatic events, especially for children. The use of combined pharmacological and non-pharmacological strategies in hospitals favor emotional experiences. However, in Latin American hospitals, which have low budgets, it is not possible to hire therapeutic support personnel, such as clowns, due to the lack of available human resources. RoPi is a social robot created to assist hospitalized children's emotional support through its multicolor interchangeable pieces and its interactive functions.
Upper-limb amputations significantly affect independence and quality of life, particularly in low-income regions where advanced prosthetic technology is costly and lacks adequate personalization. Conventional myoelectric prostheses, while offering functional restoration, have limited adaptability and high cost. This study presents a personalized transradial myoelectric prosthesis that combines additive manufacturing and Artificial Intelligence (AI) control, offering an accessible and high-performance solution. The prosthesis design utilizes additive manufacturing (3D printing) for anatomical personalization via 3D scanning and parametric modeling. An AI-driven control system utilizes machine learning to classify electromyography (EMG) signals in real-time, specifically detecting the user’s intention to perform flexion or extension movements, and tailoring responses to individual users. Evaluation employed the "Brief Activity Measure for Upper Limb Amputees (BAM-ULA)" protocol with nine participants with transradial amputations. Trials with the nine participants yielded an average BAM-ULA score of 7.4 out of 10 (Standard Deviation (SD) 0.7). This demonstrated robust functional performance, comparable to high-end commercial devices in initial tests. Gross motor tasks saw 100% success rates; fine motor tasks, 22.2%. Integrating AI and additive manufacturing resulted in an affordable, high-performance, personalized prosthesis. This work highlights how localized digital manufacturing enables accessible customization for users in low-resource settings. The main novelty is this validated integration of personalized additive manufacturing and adaptive AI control in an affordable transradial prosthesis addressing the needs of developing countries.
12 May 2025 in IEEE International Conference on Rehabilitation Robotics (ICORR)
Individuals with grasping impairments face significant challenges in performing daily tasks due to reduced hand function. Existing supernumerary robotic fingers (SRFs) often rely on electronic components that limit their usability through added weight and power constraints. This work introduces the first body-powered wrist-driven SRF (bpSRF), a design that addresses these limitations by removing all electronic components. The proposed bpSRF weighs 52 g and is mostly made of 3D printed parts. Using body-powered actuation principles, the extra finger is driven by wrist movements, offering a practical, affordable, and lightweight solution for hand augmentation. The bpSRF has two degrees of freedom, enabling users to perform enhanced grasping techniques with minimal learning curve. Experimental validation with five healthy participants showed high success rates and rapid learning of novel grasping patterns for tasks involving large or multiple objects that typically require two hands. The design offers a workspace volume approximately three times larger than a human thumb, potentially expanding users' manipulation capabilities. This research contributes to a new paradigm in assistive technology, presenting a lightweight, cost-effective, and open source SRF that can enhance grasping abilities for individuals with motor impairments while also offering augmentation possibilities for healthy users.