23 May 2025 in Science Advances
Traditional dynamic random access memory (DRAM) technology faces grand challenges in power consumption due to the constant data refresh and in density due to the physical limit for dimension scaling. Recently, two-transistor zero-capacitor (2T0C) DRAM based on amorphous indium gallium zinc oxide (IGZO) exhibits long data retention owing to its extremely low off-state leakage current. Furthermore, the low thermal budget of the IGZO channel enables the monolithic three-dimensional (3D) stacking for higher bit density beyond the planar scaling limit. However, the demonstration of 3D stacking for IGZO has been limited to 2T0C DRAM single cell. In this work, an 8 by 8 3D stacked IGZO 2T0C DRAM array was designed and manufactured with optimized electrical characteristics, exhibiting 3-bit storage with over 100-second retention time. Furthermore, a neural network model has been demonstrated to achieve an accuracy of 94.95% in image recognition, providing for promising pathway toward computing in memory to overcome the “memory wall.”
25 January 2023 in Applied Physics Reviews
Two-dimensional transition metal dichalcogenides (TMDs) are potential candidates for next generation channel materials owing to their atomically thin structure and high carrier mobility, which allow for the ultimate scaling of nanoelectronics. However, TMDs-based field-effect transistors are still far from delivering the expected performance, which is mainly attributed to their high contact resistance and low saturation velocity (vsat). In this work, we report high-performance short-channel WS2 transistors based on bandgap engineering. The bilayer WS2 channel not only shows a higher average field-effect mobility (μFE) than the monolayer channel but also exhibits excellent metal-Ohmic contact using a regular physical vapor deposition deposited Ni/Au contact, reducing the Rc value to a record low value of 0.38 kΩ · μm without any intentional doping. The bilayer WS2 device of the 80 nm channel exhibits a high on-state current of 346 μA/μm at Vds = 1 V, near-zero drain-induced barrier lowering, and a record high Ion/Ioff ratio over 109. Furthermore, a record high on-state current of 635 μA/μm at Vds = 1 V and a record high vsat of 3.8 × 106 cm/s have been achieved for a shorter 18 nm channel device, much higher than previous WS2 transistors. This work reveals the intrinsically robust nature of bilayer WS2 crystals with promising potential for integration with conventional fabrication processes.
7 April 2025 in IEEE Electron Device Letters
This work investigated the physical limits of subthreshold swing (SS) in indium-tin-oxide (ITO) transistors with temperatures down to 20 K. As the temperature decreases, the ITO transistors first exhibit a significant reduction in SS and reach a common saturated value at temperatures below 77 K for gate dielectrics of 10 nm, 5 nm, and 3 nm HfZrLaO dielectrics. The temperature dependence for SS on temperature for different dielectric thicknesses can be attributed to a transition of the dominant carrier conduction mechanism from percolation conduction (PC) to trap-limited conduction (TLC) as the temperature decreases. Benefiting from the thin dielectric thickness, a short channel 40 nm ITO transistor achieves the highest Q(gm/SS) of 9.26 (822 μS/μm / 88.5 mV/dec) at a drain bias voltage of 0.5 V.
10 July 2025 in IEEE Electron Device Letters
In this letter, we demonstrate 8 nm and 5 nm lanthanum-doped Hf0.5Zr0.5O2 (La:HZO) films with excellent ferroelectric and robust reliability at high temperature for the first time. A low saturated operating voltage of 1.2 V and high breakdown field of 9 MV/cm is obtained in 5 nm La:HZO films at the same time. A high endurance of 3×1011 at room temperature and 1010 at high temperature of 125 °C is obtained in 5 nm La:HZO films, owing to the superior low Eop/Ebd. Furthermore, we demonstrated a top-gate FeFET on La:In2O3 channel with a channel length of 50 nm, demonstrating superior high endurance of 3×1011 with memory window of 0.9 V at room temperature and 1010 with memory window of 0.9 V at high temperature of 125 °C. Besides, our FeFETs exhibit excellent retention exceeding 10 years at 125 °C, showing the great potential of La:HZO for high-reliability ferroelectric applications.
19 February 2025 in IEEE Transactions on Electron Devices
A charge-domain design of synaptic circuits based on ferroelectric tunnel junctions (FTJs) is proposed in this work. The device characteristics of experimental FTJs are analyzed, including their varactor properties, voltage-modulated tunneling electro-resistance (TER), and their significant displacement current, which challenge the circuit designs. A charge-domain design strategy is deployed to adapt this uniqueness, and a synaptic FTJ cell with the spiking-time-dependent-plasticity (STDP) rule is developed. With a TCAD-simulated FTJ of representative characteristics, the synaptic cell comprises seven transistors and one FTJ, mitigating the impacts of capacitive current and amplifying the differences of resistance states. Functional design and parameter tuning of leaky integrate-and-fire (LIF) neurons were performed. Using SPICE simulation, FTJ synapses were connected to LIF neurons, forming a low-power, unsupervised spiking neural network (SNN). Trained and tested on Modified National Institute of Standards and Technology (MNIST) handwritten digits, it achieved 88% classification accuracy. This confirms the self-learning ability of the FTJ-based neural network circuit, offering insights for neuromorphic computing advancements.
12 November 2025 in IEEE Transactions on Electron Devices
A high-performance metal–ferroelectric– insulator–metal (MFIM) ferroelectric tunnel junction (FTJ) is demonstrated through a physics-based, model-driven optimization methodology. Impacts of the depolarization field ( ${E} _{\mathbf {\text{dep}}}$ ) are estimated with a concept of D/C ratio ( ${E} _{\mathbf {\text{dep}}}$ / ${E} _{\mathbf {c}}$ , ratio of ${E} _{\mathbf {\text{dep}}}$ to the coercive field ${E} _{\mathbf {c}}$ ) and depolarized domain proportion (DDP). A comprehensive design space is proposed considering designs of DDP and fundamental physical constraints, including material, depolarization field effect, and breakdown strength of the insulator layer (IL). Critical figure of merits (FoMs) are jointly optimized with the methodology, leading to clear advancements. The designed MFIM FTJs with Al2O3 IL are fabricated with promising FoMs, including a tunneling electroresistance (TER) of ~15, an extremely high switching speed within 50 ns, and remarkable retention stability at room temperature.