Van der Waals coupling with different stacking configurations is emerging as a powerful method to tune the optical and electronic properties of atomically thin two-dimensional materials. Here, we investigate 3R-stacked transition-metal dichalcogenides as a possible option for high-performance atomically thin field-effect transistors (FETs). We report that the effective mobility of 3R bilayer WS 2 (WSe 2 ) is 65% (50%) higher than that of 2H WS 2 (WSe 2 ). The 3R bilayer WS 2 n-type FET exhibits a high on-state current of 480 μA/μm at Vds = 1 V and an ultralow on-state resistance of 1 kilohm·μm. Our observations, together with multiscale simulations, reveal that these improvements originate from the strong interlayer coupling in the 3R stacking, which is reflected in a higher conductance compared to the 2H stacking. Our method provides a general and scalable route toward advanced channel materials in future electronic devices for ultimate scaling, especially for complementary metal oxide semiconductor applications.
Monolithic integration of complementary field-effect transistor (CFET) with two-dimensional (2D) materials channels has been challenging due to the deteriorated performance of p-type transistors, especially using top-gate dielectric. In this work, we demonstrate monolithic 3D stacking CFET based on chemical-vapor-deposition (CVD) grown 2D materials channels for low-power integrated circuits (ICs). The top gate p-channel bilayer WSe 2 transistor is optimized by low-temperature post-metal annealing, achieving a record-high $\text{I}_{\text{o}\text{n}}$ of -594$\mu$A/$\mu$m and $\text{G}_{\text{m}}$ of -244$\mu$S/$\mu$m at $\text{V}_{\text{d}}=-2$V with a short $\text{L}_{\text{c}\text{h}}=135$ nm, far exceeding previous results. Furthermore, full-output-swing inverters with rail-to-rail operations and below-nanowatt low power are achieved owing to the symmetrical threshold voltages for WSe 2 pFETs and MoS 2 nFETs. The 4T SRAM and 16T half-adder circuit units based on CFET design are also experimentally demonstrated for the first time, presenting the superiority of CFET in performance, power, and area (PPA).
Two-dimensional transition metal dichalcogenides (TMDs) are potential candidates for next generation channel materials owing to their atomically thin structure and high carrier mobility, which allow for the ultimate scaling of nanoelectronics. However, TMDs-based field-effect transistors are still far from delivering the expected performance, which is mainly attributed to their high contact resistance and low saturation velocity (vsat). In this work, we report high-performance short-channel WS2 transistors based on bandgap engineering. The bilayer WS2 channel not only shows a higher average field-effect mobility (μFE) than the monolayer channel but also exhibits excellent metal-Ohmic contact using a regular physical vapor deposition deposited Ni/Au contact, reducing the Rc value to a record low value of 0.38 kΩ · μm without any intentional doping. The bilayer WS2 device of the 80 nm channel exhibits a high on-state current of 346 μA/μm at Vds = 1 V, near-zero drain-induced barrier lowering, and a record high Ion/Ioff ratio over 109. Furthermore, a record high on-state current of 635 μA/μm at Vds = 1 V and a record high vsat of 3.8 × 106 cm/s have been achieved for a shorter 18 nm channel device, much higher than previous WS2 transistors. This work reveals the intrinsically robust nature of bilayer WS2 crystals with promising potential for integration with conventional fabrication processes.
Two-dimensional transition-metal dichalcogenides (TMDCs) have been pursued for high-performance logic electronic devices, and compatibility with silicon complementary metal-oxide-semiconductor (CMOS) technology is essential. Thus, high-quality material synthesis at reduced temperature is a key challenge for TMDC integration with the back-end-of-line silicon CMOS. In this work, TMDCs have been synthesized at temperatures down to 450 °C on SiO2/Si substrates via chemical vapor deposition. This work highlights the necessity of improving metal precursor mass flux during the low-temperature synthesis of TMDC films. Improved electrical characteristics of the back-gated p-type field-effect transistors based on monolayer WSe2 exhibit an on-current of 14 μA/μm and subthreshold swing of 200 mV/dec.