Optoelectronic effects of sidewall passivation on micro-sized light-emitting diodes (µLEDs) using atomic-layer deposition (ALD) were investigated. Moreover, significant enhancements of the optical and electrical effects by using ALD were compared with conventional sidewall passivation method, namely plasma-enhanced chemical vapor deposition (PECVD). ALD yielded uniform light emission and the lowest amount of leakage current for all µLED sizes. The importance of sidewall passivation was also demonstrated by comparing leakage current and external quantum efficiency (EQE). The peak EQEs of 20 × 20 µm2 µLEDs with ALD sidewall passivation and without sidewall passivation were 33% and 24%, respectively. The results from ALD sidewall passivation revealed that the size-dependent influences on peak EQE can be minimized by proper sidewall treatment.
The electrical and optical improvements of AlGaInP micro-light-emitting diodes (µLEDs) using atomic-layer deposition (ALD) sidewall passivation were demonstrated. Due to the high surface recombination velocity and minority carrier diffusion length of the AlGaInP material system, devices without sidewall passivation suffered from high leakage and severe drop in external quantum efficiency (EQE). By employing ALD sidewall treatments, the 20×20 µm2 µLEDs resulted in greater light output power, size-independent leakage current density, and lower ideality factor. The forward current-voltage characteristic was enhanced by using surface pretreatment. Furthermore, ALD sidewall treatments recovered the EQE of the 20×20 µm2 devices more than 150%. This indicated that AlGaInP µLEDs with ALD sidewall treatments can be used as the red emitter for full-color µLED display applications.
4 November 2021 in Journal of Lightwave Technology
We demonstrate a high-speed light fidelity (LiFi) communication system deploying ultra-high brightness laser-based white light illumination sources in a surface mount device (SMD) packaging platform. The LiFi transmitter SMD source provides 450 lumens of white light output with a brightness of 1000 cd/mm2 in a dual wavelength configuration comprising blue and infrared (IR) emitting laser diodes within the SMD. First, we present high-speed data transmission beyond 25 Gbit/s over a 3 meter channel distance with the combined data rates from the blue and IR lasers in the single SMD. Next, we present a 2.8 Gbit/s data rate with the dual wavelength laser SMD light source using a side-emissive fiber as the transmitter. This work proves the viability of LiFi systems deploying laser-based white light sources operating at very high data rates with the visible light and communication signal delivered in conventional free-space transmission architectures along with novel configurations using side-emitting fibers.
This paper investigated the use of semipolar InGaN/GaN multiple quantum well based micro-photodetectors (μPDs) as the optical receiver for visible light communication (VLC). The fabricated semipolar μPDs exhibited a low dark current of 1.6 pA at −10 V, a responsivity of 0.191 A W−1, and a −3 dB modulation bandwidth of 347 MHz. A high data rate of up to 1.55 Gbit s−1 was achievable by utilizing the extended bandwidth of more than −10 dB, and based on a straight-forward non-return-to-zero on–off keying modulation scheme. This development demonstrated the feasibility of wavelength-selective detection scheme using semipolar μPD for high-data-capacity VLC systems.
The dynamic characteristics of III-nitride multi-quantum well laser diodes (LDs) emitting at 410 nm were investigated. LDs were grown on semipolar bulk GaN substrates and fabricated into devices with cavity lengths ranging from 900 nm to 1800 nm. A 3-dB bandwidth of 5 GHz and 5 Gbit/s direct modulation with on-off keying were demonstrated, which were limited by the bandwidth of the photodetector used for the measurements. The differential gain of the LDs was determined to be 2.5 ± 0.5 × 10−16 cm2 by comparing the slope efficiency for different cavity lengths. Analysis of the frequency response showed that the K-factor, the gain compression factor, and the intrinsic maximum bandwidth were 0.33 ns, 7.4 × 10−17 cm3, and 27 GHz, respectively.
We reported significant improvements in device speed by reducing the quantum barrier (QB) thicknesses in the InGaN/GaN multiple quantum well (MQW) photodetectors (PDs). A 3-dB bandwidth of 700 MHz was achieved with a reverse bias of -6 V. Carrier escape lifetimes due to carrier trapping in the quantum wells (QWs) were obtained from both simulation and experimental fitting, identifying carrier trapping as the major speed limiting factor in the InGaN/GaN MQW PDs.