In this article a review of low temperature (LT) (≤500 °C) process modules in view of 3-D sequential integration is presented. First, both the bottom device thermal stability and intermediate back end of line (iBEOL) versus thermal anneal and ns-laser anneal is determined, setting up the top device temperature fabrication process at 500 °C during a couple of hours. Then, the full LT process flow with process modules developed at 500 °C is exposed. Great progress and breakthrough for high performance (HP) digital stacked FETs has been made recently. Areas previously considered as potential showstoppers have been overcome: 1) efficient contamination containment for wafers with Cu/ultra low- k (ULK) iBEOL enabling their reintroduction in front end of line (FEOL) for top FET processing; 2) low-resistance poly-Si gate for the top FETs and solutions for improving gate-stack reliability; and 3) full LT raised source drain (RSD) epitaxy including surface preparation combined with SiCO 400 °C spacer and SPER junctions activation. Finally, the first functional nMOS and pMOS demonstration with a 500 °C thermal budget (TB) is highlighted.
27 May 2021 in IEEE Transactions on Electron Devices
RF performance and intertier coupling of CMOS processed in 3-D sequential integration are investigated. pMOS transistor fabricated with a 500 °C thermal budget features good RF figures of merit with ${f}_{t} =105$ GHz and ${f}_{\text {max}} =175$ GHz for a gate length of 45 nm and ${V}_{\text {DD}} = -1$ V. Moreover, we demonstrate that the low- ${k}$ SiCO oxide spacer and low polysilicon gate resistance obtained with the low temperature process contribute to ${f}_{\text {max}}$ results that are better than high temperature process (above 1000°). Finally, we illustrate the crosstalk effects and the influence of the low-tier transistor gate voltage ${V}_{\text {G}}$ on the top-tier threshold voltage ${V}_{T}$ . We also show that a polysilicon ground shield integrated under the top-tier transistor substantially attenuates the intertier RF field coupling effects.