Inger‐Emma Nylund

Inger‐Emma Nylund

Auto-generated profile, based on publicly available information

Inger‐Emma Nylund

Department of Materials Science and Engineering NTNU Norwegian University of Science and Technology Trondheim Norway

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2021 in AIP Advances
Verified
Journal Article
Open access
PDF file
TRTrygve M. Raeder
Trygve M. Raeder
THTheodor S. Holstad
Theodor S. Holstad
INInger-Emma Nylund
Inger-Emma Nylund
MEMari-Ann Einarsrud
Mari-Ann Einarsrud
JGJulia Glaum
Julia Glaum
TTTor Tor
Tor Tor
Ferroelectric properties of films can be tailored by strain engineering, but a wider space for property engineering can be opened by including crystal anisotropy. Here, we demonstrate a huge anisotropy in the dielectric and ferroelectric properties of BaTiO3 films. Epitaxial BaTiO3 films deposited on (100), (110), and (111) SrTiO3 substrates were fabricated by chemical solution deposition. The films were tensile-strained due to thermal strain confirmed by the enhanced Curie temperature. A massive anisotropy in the dielectric constant, dielectric tunability, and ferroelectric hysteresis loops was observed depending on the in-plane direction probed and the orientation of the films. The anisotropy was low for (111) BaTiO3, while the anisotropy was particularly strong for (110) BaTiO3, reflecting the low in-plane rotational symmetry. The anisotropy also manifested at the level of the ferroelectric domain patterns in the films, providing a microscopic explanation for the macroscopic response. This study demonstrates that the properties of ferroelectric films can be tailored not only by strain but also by crystal orientation. This is particularly interesting for multilayer stacks where the strain state is defined by the boundary conditions. We propose that other materials can be engineered in a similar manner by utilizing crystal anisotropy.

4 March 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
INI.-E. Nylund
I.-E. Nylund
TRT. M. Raeder
T. M. Raeder
PVP. E. Vullum
P. E. Vullum
TTTor Tor
Tor Tor
Chemical solution deposition (CSD) is a versatile method to fabricate oxide films. Here, the structure and local variations in the chemical composition of BaTiO 3 (BTO) films prepared by CSD on (100), (110), and (111) SrTiO 3 (STO) substrates were examined by transmission electron microscopy. The films were shown to be epitaxial and the relaxation of the films occurred by the formation of edge dislocations at the substrate–film interfaces. The Burgers vectors of the dislocations were determined to be a ⟨ 010 ⟩ , a [ 1 1 ¯ 0 ] and a [ 001 ] , and a ⟨ 110 ⟩ for the (100), (110), and (111) films, respectively. Due to the difference in thermal expansion between STO and BTO, the films are demonstrated to be under tensile strain. Furthermore, the boundaries between each deposited layer in the BTO films were found to be Ba-deficient in all cases. In the case of the (111) oriented film, defects like an anti-phase boundary or a thin layer with a twinned crystal structure were identified at the boundary between each deposited layer. Moreover, a larger grain was observed at the film surface with a twinned crystal structure. The interdiffusion length of A-cations at the STO–BTO interface, studied by electron energy-loss spectroscopy, was found to be 3.4, 5.3, and 5.3 nm for the (100), (110), and (111) oriented films, respectively. Interdiffusion of cations across the STO–BTO interface was discussed in relation to cation diffusion in bulk BTO and STO. Despite the presence of imperfections demonstrated in this work, the films possess excellent ferroelectric properties, meaning that none of the imperfections are detrimental to the ferroelectric properties.

1 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MAMohammed Mostafa Adnan
Mohammed Mostafa Adnan
INInger-Emma Nylund
Inger-Emma Nylund
AJAleksander Jaworski
Aleksander Jaworski
SHSverre Hvidsten
Sverre Hvidsten
MEMarit-Helen Glomm Ese
Marit-Helen Glomm Ese
MEMari-Ann Einarsrud
Mari-Ann Einarsrud
Epoxy nanocomposites have demonstrated promising properties for high-voltage insulation applications. An in situ approach to the synthesis of epoxy-SiO2 nanocomposites was employed, where surface-functionalized SiO2 (up to 5 wt.%) is synthesized directly in the epoxy. The dispersion of SiO2 was found to be affected by both the pH and the coupling agent used in the synthesis. Hierarchical clusters of SiO2 (10–60 nm) formed with free-space lengths of 53–105 nm (increasing with pH or SiO2 content), exhibiting both mass and surface-fractal structures. Reducing the amount of coupling agent resulted in an increase in the cluster size (~110 nm) and the free-space length (205 nm). At room temperature, nanocomposites prepared at pH 7 exhibited up to a 4% increase in the real relative permittivity with increasing SiO2 content, whereas those prepared at pH 11 showed up to a 5% decrease with increasing SiO2 content. Above the glass transition, all the materials exhibited low-frequency dispersion effect resulting in electrode polarization, which was amplified in the nanocomposites. Improvements in the dielectric properties were found to be not only dependent on the state of dispersion, but also the structure and morphology of the inorganic nanoparticles.

8 August 2023 in Batteries & Supercaps
Verified
Journal Article
Open access
PSPhilipp Schweigart
Philipp Schweigart
OEObinna Egwu Eleri
Obinna Egwu Eleri
INInger‐Emma Nylund
Inger‐Emma Nylund
SLSamson Yuxiu Lai
Samson Yuxiu Lai
FLFengliu Lou
Fengliu Lou
ASAnn Mari Svensson
Ann Mari Svensson
Lithium‐ion capacitors (LICs) represent promising high‐power energy storage devices, most commonly composed of a lithium‐ion intercalation anode (e. g., graphite or hard carbon), a supercapacitor activated carbon (AC) cathode, and an electrolyte with 1 M LiPF6 in carbonate solvents. LiPF6 is susceptible to hydrolysis, forming HF, which leads to challenges for disassembly and recycling, risks during hazardous events, and extensive energy consumption during production. Here, we report on the feasibility of replacing LiPF6 with the non‐hydrolysing salt LiFSI for use with AC electrodes. Based on voltage hold measurements in a half‐cell setup, good long‐term stability is achieved with an upper cut‐off voltage of 3.95 V vs. Li/Li+, potentially enabling cell voltages of ~3.8 V when combined with graphite or silicon‐based anodes (operating at ~0.1 V vs. Li/Li+) in LIC full cells. The lower cut‐off voltage was determined to be 2.15 V vs. Li/Li+. The systematic comparison of CV, leakage current analysis and capacity retention upon voltage hold highlights the importance of the latter method to provide a realistic assessment of the electrochemical stability window (ESW) of LiFSI on a commercial AC electrode. The morphological and surface‐chemical post‐mortem analysis of AC electrodes used with LiFSI revealed that the oxidation of the FSI anion, as evidenced by the presence of new S 2p and N 1s features in the XPS spectra, and an increasing number of oxygenated species on the AC were the main processes causing capacity fade at positive polarization.

10 March 2022 in Physical Review Materials
Verified
Journal Article
Closed access
PDF file
INInger-Emma Nylund
Inger-Emma Nylund
MTMaria Tsoutsouva
Maria Tsoutsouva
TTTor Tor
Tor Tor
DMDennis Meier
Dennis Meier
Gadolinium molybdate is a classical example of an improper ferroelectric and ferroelastic material. It is established that the spontaneous polarization arises as a secondary effect, induced by a structural instability in the paraelectric phase, which leads to a unit cell doubling and the formation of a polar axis. However, previous x-ray diffraction (XRD) studies on gadolinium molybdate have been restricted by the limited ability to include a wide 2θ range in the analysis, and thus, at atomic scale, much remains to be explored. By applying temperature-dependent XRD, we observe the transition from the paraelectric tetragonal phase to the orthorhombic ferroelectric phase. The ferroelastic strain is calculated based on the thermal evolution of the lattice parameters, and Rietveld refinement of the temperature-dependent data reveals that the displacement of different cations follows different critical behavior, providing insight into the structural changes that drive the improper ferroelectricity in gadolinium molybdate.

14 October 2021 in Chemistry–Methods
Verified
Journal Article
Open access
PDF file
KBKristine Bakken
Kristine Bakken
ABAnders Blichfeld
Anders Blichfeld
INInger‐Emma Nylund
Inger‐Emma Nylund
Dmitry ChernyshovDmitry Chernyshov
Dmitry Chernyshov
JGJulia Glaum
Julia Glaum
MEMari-Ann Einarsrud
Mari-Ann Einarsrud
Ferroelectric properties of thin films can be enhanced by crystallographic texture. In this work, we report on how heat treatment of films can be designed to tailor the degree of preferential orientation in BaTiO3‐based thin films from aqueous chemical solution deposition. In situ synchrotron X‐ray diffraction in combination with Rietveld refinements was used to study the crystallization process of films from a single deposition and to give an in‐depth characterization of the crystallographic texture of the films. Transmission electron microscopy was employed to evaluate the microstructure and degree of preferred orientation in thicker films from multiple depositions. Texture was induced in the multilayer films by a repeated annealing process. Cube‐on‐cube growth was demonstrated to occur in both single and multi‐layered films provided the heating program was designed to give limited nucleation and growth below the threshold for where cube‐on‐cube growth is favoured, resulting in a very high degree of preferred orientation. The cube‐on‐cube grown films were relaxed with respect to the lattice unit cell mismatch between the film and the substrate, where the relaxation of stress depends on the film thickness. Texture and cube‐on‐cube growth were demonstrated on several types of single‐crystal oxide substrates. Calcium and zirconium substitution did not alter the crystallization process, but zirconium slowed down the texture formation kinetics. The ferroelectric response was strongest in the films with a high degree of preferred orientation.