1 July 2021 in Construction and Building Materials
MAMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
SRShayfull Zamree Abd Rahim
Shayfull Zamree Abd Rahim
+1
10 June 2022 in Archives of Metallurgy and Materials
For ages, concrete has been used to construct underwater structures. Concrete laying underwater is a very complex procedure important to the success or failure of underwater projects. This paper elucidates the influence of alkali activator ratios on geopolymers for underwater concreting; focusing on the geopolymer concrete synthesized from fly ash and kaolin activated using sodium hydroxide and sodium silicate solutions. The geopolymer mixtures were designed to incorporate multiple alkali activator ratios to evaluate their effects on the resulting geopolymers’ properties. The fresh concrete was molded into 50 mm cubes in seawater using the tremie method and tested for its engineering properties at 7 and 28 days (curing). The control geopolymer and underwater geopolymers’ mechanical properties, such as compressive strength, water absorption density, and setting time were also determined. The differences between the control geopolymer and underwater geopolymer were determined using phase analysis and functional group analysis. The results show that the geopolymer samples were optimally strengthened at a 2.5 alkali activator ratio, and the mechanical properties of the control geopolymer exceeded that of the underwater geopolymer. However, the underwater geopolymer was determined to be suitable for use as underwater concreting material as it retains 70% strength of the control geopolymer.
28 February 2022 in Archives of Metallurgy and Materials
Geopolymer is widely studied nowadays in various scope of studies. Some of the ongoing studies are the study of the various materials towards the geopolymer strength produced. Meanwhile, some of the studies focus on the mixing of the geopolymer itself. This paper discussed the phase analysis of metakaolin/dolomite geopolymer for different solid to the liquid ratio which was, 0.4, 0.6, 0.8, and 1.0, and the properties that affected the geopolymer based on the phases. The constant parameters in this study were the percentage of metakaolin and dolomite used. The metakaolin used was 80% meanwhile dolomite usage was 20%. Besides that, the molarity of NaOH used is 10M and the alkaline activator ratio used is 2.0. All the samples were tested at 28 days of curing. The results show that the 0.8 solid to the liquid ratio used gave better properties compare to other solid to liquid ratio. The phases analyzed were quartz, sillimanite, mullite, and faujasite. The 0.8 S/L ratio shows the better properties compared to others by the test of phase analysis, compressive strength morphology analysis, and functional group analysis.
1 March 2025 in Materials Research Express
WIWan Mastura Wan Ibrahim
MAMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
RARaqibahtul Husna Azahar
+1
This study presents a comprehensive investigation into the efficacy of metakaolin based alkali activated materials for the efficient removal of nickel and lead ions from aqueous solutions. The synthesis process involved the preparation of porous structures with high porosity, leading to an expanded surface area and an increased number of sorption sites. By applying alkali activation to the metakaolin, the reactivity is enhanced, forming hydrated phases that exhibited exceptional adsorption properties. This study examined the ideal sodium hydroxide molarity and metakaolin/activator ratios for producing metakaolin-based alkali activated materials based on the physical properties and capacity to adsorb nickel and lead ions. The solution with 10M sodium hydroxide and a 0.8 solid-to-liquid ratio had the best nickel and lead ion removal efficiency. This ratio formed metakaolin-based alkali-activated materials with suitable physical properties and porosity for efficient adsorption. The results demonstrated an outstanding removal efficiency of nickel and lead ions of 95.78% and 93.7%, respectively within 60 min contact duration. Moreover, the optimal ratio revealed to a evolution of muscovite phases that enhances adsorption capacity and removal efficiency. The adsorption process was found to be rapid coupled with promising structural properties, highlighting the potential of the metakaolin-based alkali-activated materials as an adsorbent for efficient heavy metal removal.
16 December 2024 in Archives of Metallurgy and Materials
Geopolymer concrete is a new sustainable and environmentally friendly composite with great potential to replace conventional concrete that is mostly produced by ordinary Portland cement (OPC). Binders used for geopolymer concrete such as fly ash and blast furnaces are mostly industrial wastes or by -products containing high silica and aluminium content that act as stimulants for geopolymerization. Furthermore, geopolymers also exhibit better durability and corrosion resistance than OPCs. However, material subjected to underwater placement method typically exhibit a decrease in properties. While geopolymer has not been widely used as underwater concreting material, this research is purposed to identify the effect of underwater placement method towards geopolymer in terms of microstructure analysis. Using different molarities of sodium hydroxide (NaOH), the optimum compressive strength will be discussed for underwater concrete while correlating with the microstructure result. For alkaline activators, the ratio used is 2.5 and the ratio for solid to liquid is 2.5. The molarities used for alkaline activators were 8 M, 10 M and 12 M. Using the tremie method for underwater concrete, it is possible to measure the leaching loss with respect to the objective of this research. The best compressive strength result is 12 M. The SEM result support with 12 M molarity had less cavities and lowest density.