Masdiyana Ibrahim

Ms. Masdiyana Ibrahim

Universiti Malaysia Perlis, Kangar, Perlis, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
Suhani AhmadSuhani Ahmad
Suhani Ahmad
Andrei Victor SanduAndrei Victor Sandu
Andrei Victor Sandu
Petrica VizureanuPetrica Vizureanu
Petrica Vizureanu
ASAhmad Syauqi Sauffi
Ahmad Syauqi Sauffi
Geopolymers are an inorganic material in an alkaline environment that is synthesized with alumina–silica gel. The structure of geopolymers consists of an inorganic chain of material and a covalent-bound molecular system. Currently, Ordinary Portland Cement (OPC) has caused carbon dioxide (CO2) emissions which causes greenhouse effects. This analysis investigates the impact on fly ash/dolomite-based-geopolymer with various molarities of sodium hydroxide solutions which are 6 M, 8 M, 10 M, 12 M and 14 M. The samples of fly ash/dolomite-based-geopolymer were prepared with the usage of solid to liquid of 2.0, by mass and alkaline activator ratio of 2.5, by mass. After that, the geopolymer was cast in 50 × 50 × 50 mm molds before testing after 7 days of curing. The samples were tested on compressive strength, density, water absorption, morphology, elemental distributions and phase analysis. From the results, the usage of 8 M of NaOH gave the optimum properties for the fly ash/dolomite-based geopolymer. The elemental distribution analysis exposes the Al, Si, Ca, Fe and Mg chemical distribution of the samples from the selected area. The distribution of the elements is related to the compressive strength and compared with the chemical composition of the fly ash and dolomite.

31 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
MIMasdiyana Ibrahim
Masdiyana Ibrahim
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
Marcin NabiałekMarcin Nabiałek
Marcin Nabiałek
Ramadhansyah Putra JayaRamadhansyah Putra Jaya
Ramadhansyah Putra Jaya
BJBartłomiej Jeż
Bartłomiej Jeż
Water contamination is a major issue due to industrial releases of hazardous heavy metals. Copper ions are among the most dangerous heavy metals owing to their carcinogenicity and harmful effects on the environment and human health. Adsorption of copper ions using alkali activated materials synthesized through the polycondensation reaction of an alkali source and aluminosilicates is the most promising technique, and has a high adsorption capability owing to a large surface area and pore volume. This research focuses on the effect of the alkaline activator ratio, which is a sodium silicate to sodium hydroxide ratio. Various exposing temperatures on metakaolin based alkali activated materials on a surface structure with excellent functional properties can be used as adsorbent materials for the removal of copper ions. A variety of mix designs were created with varying sodium silicate to sodium hydroxide ratios, with a fixed sodium hydroxide molarity, metakaolin to alkali activator ratio, hydrogen peroxide, and surfactant content of 10 M, 0.8, 1.00 wt%, and 3.0 wt%, respectively. Most wastewater adsorbents need high sintering temperatures, requiring an energy-intensive and time-consuming manufacturing process. In this way, metakaolin-based alkali activated materials are adsorbent and may be produced easily by solidifying the sample at 60 °C without using much energy. The specific surface area, water absorption, microstructure, phase analysis, functional group analysis, and adsorption capability of copper ions by metakaolin based alkali activated materials as adsorbents were evaluated. The water absorption test on the samples revealed that the sodium silicate to sodium hydroxide 0.5 ratio had the highest water absorption percentage of 36.24%, superior pore size distribution, and homogeneous porosity at 60 °C, with a surface area of 24.6076 m2/g and the highest copper ion uptake of 63.726 mg/g with 95.59% copper ion removal efficiency at adsorption condition of pH = 5, a dosage of 0.15 g, 100 mg/L of the initial copper solution, the temperature of 25 °C, and contact time of 60 min. It is concluded that self-supported metakaolin based alkali activated material adsorbents synthesized at low temperatures effectively remove copper ions in aqueous solutions, making them an excellent alternative for wastewater treatment applications.

10 June 2022 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
MIMasdiyana Ibrahim
Masdiyana Ibrahim
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
ASAhmad Syauqi Sauffi
Ahmad Syauqi Sauffi
Petrica VizureanuPetrica Vizureanu
Petrica Vizureanu
Geopolymer is synthesized by polycondensation of SiO4 and AlO4 aluminosilicate complexes, tetrahedral frames linked with shared sialate oxygen. This paper studies the effect of the solids-to-fluids (S/L) and Na2SiO3/NaOH proportions on the preparing of metakaolin inorganic membrane geopolymer. By consolidating a mixture of metakaolin with sodium hydroxide, sodium silicate and foaming agent, the geopolymer membrane was made in required shape about 1 cm and cured at 80°C for 24 hours. After the curing process, the properties of the samples were tested on days 7. Sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) solution were utilized as an alkaline activator with a NaOH fixation fixed at 10 M. The geopolymer inorganic membrane tests were set up with various S/L proportions (0.8, 1.0, 1.2 and 1.4) and Na2SiO3/NaOH proportions (0.5, 1.0, 1.5, 2.0 and 2.5). Aluminium (Al) powder as a foaming agent was used to create bubbles in porous structure and provide details on the development of membrane geopolymers. This metakaolin membrane, based on the geopolymer, was synthesized by a suspension that depends on the fast cementing mechanism of high-temperature slurries. Porous geopolymeric circles provided a homogeneous composition and quantitative distribution of pores. The water absorption, density, impact toughness testing and microstructure analyses were studied. However, considering the promising results, an adjustment in the mix design of the metakaolin inorganic membrane geopolymer mixtures could increase their mechanical properties without negatively affecting the mechanical properties and porosity, making these sustainable materials a suitable alternative to traditional porous cement concrete.

28 February 2022 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
ASAhmad Syauqi Sauffi
Ahmad Syauqi Sauffi
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
MIMasdiyana Ibrahim
Masdiyana Ibrahim
Suhani AhmadSuhani Ahmad
Suhani Ahmad
FZFakhryna Ahmad Zaidi
Fakhryna Ahmad Zaidi
Geopolymer is widely studied nowadays in various scope of studies. Some of the ongoing studies are the study of the various materials towards the geopolymer strength produced. Meanwhile, some of the studies focus on the mixing of the geopolymer itself. This paper discussed the phase analysis of metakaolin/dolomite geopolymer for different solid to the liquid ratio which was, 0.4, 0.6, 0.8, and 1.0, and the properties that affected the geopolymer based on the phases. The constant parameters in this study were the percentage of metakaolin and dolomite used. The metakaolin used was 80% meanwhile dolomite usage was 20%. Besides that, the molarity of NaOH used is 10M and the alkaline activator ratio used is 2.0. All the samples were tested at 28 days of curing. The results show that the 0.8 solid to the liquid ratio used gave better properties compare to other solid to liquid ratio. The phases analyzed were quartz, sillimanite, mullite, and faujasite. The 0.8 S/L ratio shows the better properties compared to others by the test of phase analysis, compressive strength morphology analysis, and functional group analysis.

15 September 2023 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
MIMasdiyana Ibrahim
Masdiyana Ibrahim
MAM.Z.A. Azis
M.Z.A. Azis
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
ASA.S. Sauffi
A.S. Sauffi
SASuraya Hani Adnan
Suraya Hani Adnan
Due to their potential to lower CO2 emissions linked with the cement and concrete industries, geopolymer binders are a desirable alternative for Portland cement binders. However, if they are to become a viable alternative to conventional Portland cement materials, their resilience in harsh conditions has to be further investigated. This paper presented mechanical and short-term durability properties of metakaolin based geopolymer concrete at sulphuric acid (H2SO4) solutions exposed with the concentrations of 2%, 3%, 4% and 5% for 14 days. (0%) or unexposed sample also prepared as referral and comparison. The geopolymer concretes were synthesized using an alkali activation of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). The main objective of the study was to examine the durability and deterioration mechanism parameters like different acid percentages, changes in weight, compressive strength, density and water absorption. Morphology analysis also performed in this study. The results indicated that metakaolin geopolymer experienced some strength deterioration with increasing sulphuric concentration solutions which are from 32.58 MPa, 20.67 MPa and 4.25 MPa at unexposed (0%), 2% and 5% sulphuric acid immersion respectively. Furthermore, change in weight or mass loss and water absorption after the chemical attack resulted directly proportional to sulphuric acid concentration due to increment of crack on the sample. Among that, the metakaolin geopolymer submerged in 2% acid gives the optimum results in terms of durability, mechanical and physical qualities.

15 September 2023 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
MIMasdiyana Ibrahim
Masdiyana Ibrahim
WIWan Mastura Wan Ibrahim
Wan Mastura Wan Ibrahim
Mohd Mustafa Al Bakri AbdullahMohd Mustafa Al Bakri Abdullah
Mohd Mustafa Al Bakri Abdullah
LML.H. Mahamud
L.H. Mahamud
MTM.N.N. Tajuddin
M.N.N. Tajuddin
NYNur Faezah Yahya
Nur Faezah Yahya
The performance of adsorbent synthesized by alkali activation of aluminosilicate precursor metakaolin with sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) as well as the foaming agent was studied for copper ions adsorption from aqueous solution. This paper investigated the effect of adding hydrogen peroxide (H2O2) and aluminium powder as foaming agents to an alkali activated materials slurry. The experimental range included 0.50 wt%, 0.75 wt%, and 1.00 wt% hydrogen peroxide and 0.02 wt%, 0.04 wt%, and 0.06 wt% aluminium powder. A control sample without a foaming agent was also created for comparison. The specific surface area, water absorption, density, compressive strength and microstructure of metakaolin based alkali activated materials were evaluated. The adsorption capability of Cu2+ with addition of hydrogen peroxide and aluminium powder was then tested. Results indicate hydrogen peroxide addition had superior pore size distribution and homogeneous porosity than aluminium powder, implying improved copper ion elimination. Cu2+ adsorption capability reached 98% with 0.75 wt% hydrogen peroxide and 24.6076 m2/g surface area. The results demonstrating that low cost metakaolin-based AAMs are the most effective adsorbent for removing copper ions.