15 August 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
As electronic packages continue to get smaller, designing reliable solder joints is becoming an increasingly important part of the design process. The shape and height of the solder joint are major factors that can be optimized to improve the reliability of flip chip and ball grid array (BGA) packages. Optimizing the dimensions of the underlying copper pad, which influences solder height and shape, can lead to a longer time to failure for packages undergoing cyclic temperature loads. In this study, the influence of the copper pad design on the thermal fatigue life performance of an off-the-shelf BGA package is investigated. Printed circuit boards with different pad dimensions are employed to analyze the difference in the performance in accelerated thermal cycling tests (ATC) on a BGA package. In the second part of the paper, Surface Evolver is used to predict the shape of the solder joint for different combinations of copper pad diameters on the component and PCB side and its influence on fatigue life test performance is compared. The accumulated plastic work is used to predict the thermo-fatigue life of the different solder geometries.
22 April 2025 in IEEE Transactions on Components, Packaging and Manufacturing Technology
By employing optimized outer packaging designs and materials, the impact energy can be effectively absorbed or dissipated, thereby preventing potential damage to interconnections and chips. This includes mitigating solder-joint fractures, chip cracks, pad cratering or lifting, and other mechanical stresses that commonly result from impact forces. To ensure that the internal ionic sensor remains resilient to moisture intrusion and can endure impact velocities of up to 30 mph, advanced packaging solutions have been developed. In this study, the ANSYS/LS-DYNA finite element analysis (FEA) tool was utilized to evaluate the performance of various packaging designs in minimizing the shock energy transferred to the printed circuit board (PCB). Modifications were made to the external foam packaging to increase the effective thickness and stiffness of the PCB, thus limiting its deformation under impact. These adjustments involved testing several configurations, including a two-layer foam system, a single-layer foam, and variations in the foam material’s stress-strain characteristics. The results demonstrated a significant reduction in PCB deformation—by 86.9%—with the final design achieving a deformation of just 52 μm, compared to 398.7 μm in the initial design. Furthermore, simulations of the final design were conducted for different drop orientations to ensure that out-of-plane deformations remained within the same order of magnitude, regardless of the drop direction.